[driverloader] intel 2100 not working

[Marc Boucher]

Hi Andre,

Please try doing "iwconfig eth1 mode ad-hoc essid teste" on
the machine with the Intel PRO/Wireless card, with
driverloader-1.33 or later.

If it still doesn't work, send the output of "dldrconfig --dumpdiag"
to support at linuxant.com.

Good luck
Marc

On Fri, Nov 07, 2003 at 10:14:24PM +0000, André Ventura Lemos wrote:
> The problem still persists with driverloader-1.32 :(

On Wed, Nov 05, 2003 at 10:16:57PM +0000, André Ventura Lemos wrote:
> eth1: New link status: Disconnected (0002)
> eth1: Intel(R) PRO/Wireless 7100 LAN Card Driver at 0000:02:06.0 (MAC
> address 00:04:23:7B:BF:C6) ready
> 
> 
> eth1      IEEE 802.11-DS  ESSID:""  Nickname:"unknown"
>           Mode:Managed  Bit Rate=54Mb/s
>           RTS thr=1600 B   Fragment thr=2344 B
>           Encryption key:off
>           Power Management:off
>           Link Quality:1/1  Signal level:-98 dBm  Noise level:-200 dBm
>           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
> 
> 
> But when seating next to:
> 
> eth1      ATMEL RFMD503A  ESSID:"teste"  Nickname:"teste"
>           Mode:Ad-Hoc  Channel:10  Cell: 02:00:E7:83:24:FC
>           Bit Rate:11Mb/s
>           RTS thr=2347 B   Fragment thr=2346 B
>           Encryption key:off
>           Link Quality:100  Signal level:0  Noise level:0
>           Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
>           Tx excessive retries:0  Invalid misc:0   Missed beacon:0
> 
> 
> and doing: iwlist eth1 scan, I get 
> 
> eth1      Failed to read scan data : No data available
> 
> and yes, the wireless is enabled on the bios. Any hints?
> 
> OH, I'm using the kernel 2.6.0-test9 and driverloader-1.25.
> 
> 
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader
>