[driverloader] From Mandrake 9.1 to Redhat 9

Wed Nov 26 16:51:54 EST 2003

No able to get any answer on my Mandrake (package freeze when saving key 
information) questions, I got rid of it and installed redhat 9 ( getting 
pretty desperate here !!!)

I got further as I could save my key information and got the web page ( 
) that said that the driver was installed OK (see further down).

Then I used redhat-control-network to activate the interface and kept 
getting bad parameter errors.

I blamed it on me and the distro again and accepted the redhat package 
upgrade (just in case).

Now I'm getting this (same error but much faster + the modprobe error) ....
************************
Error for wireless request "Set Encode" (8B2A) :
invalid argument "s:".

Définition des informations IP pour eth1.modprobe: Can't locate module 
bsd_comp
échoué.
*************************

I have a week left to bring my WIFI hardware back - PLEASE GIVE ME SOME 
FEEDBACK, there is no way I'll go to windows (that's why your driver is 
the first I ever had to pay for under Linux).

Support please !!!!

********************************************************************

[Refresh <http://127.0.0.1:18020/cgi-bin/config.cgi>] [Reload 
<http://127.0.0.1:18020/cgi-bin/config.cgi?cmd=reload>] 
<http://www.linuxant.com>
DriverLoader™ Configuration

	v1.46

Device 	Driver 	MAC Address 	License 	
eth1 	bcm43xx 	00:0C:41:60:28:EB 	OK 	[Settings 
<http://127.0.0.1:18020/cgi-bin/parse.cgi?config=bcm43xx.inf&pci=PCI-0000:00:08.0-14e4:4320-1737:0013&dev=eth1>] 

	All devices are licensed and configured.

To change license information or to modify advanced settings, click on 
[/Settings/] next to the device.

To add a new driver or update an existing one, click on [/Upload Windows 
Driver/ <http://127.0.0.1:18020/cgi-bin/config.cgi?cmd=add>].

Driver 	Vendor 	Version 	Delete
bcm43xx 	Linksys 	06/13/2003, 3.20.23.0 	[X 
<http://127.0.0.1:18020/cgi-bin/config.cgi?cmd=remove&config=bcm43xx.inf>]

[Upload Windows Driver <http://127.0.0.1:18020/cgi-bin/config.cgi?cmd=add>]