[driverloader] Help!!! Please!!

Linuxant support support at linuxant.com
Tue Jan 13 23:18:07 EST 2004


your adapter doesn't seem to appear in the output from "lspci". Does it work
properly under Windows? Do you need to press a button to activate it? There
could also be a BIOS option to enable or disable the card.

If it doesn't show up with "lspci", then DriverLoader will not be able to
communicate with it through the PCI bus. You might need to install the
"kernel-pcmcia-cs" package. Verify if it is installed with the following

rpm -qa | grep pcmcia

If it is missing (above command gives no output), then please install it
from your Linux distribution, then reboot and try DriverLoader again.


Jean-Simon Durand
Technical specialist / Linuxant
support at linuxant.com

----- Original Message ----- 
From: "Jasmeet Bawa" <bawajs at aston.ac.uk>
To: <driverloader at lists.linuxant.com>
Sent: Tuesday, January 13, 2004 12:12 PM
Subject: [driverloader] Help!!! Please!!


I have attached driver..diag.txt

The problem is (in the web interface) after pointing to the inf and sys

I just get a message device not found or not attached, though the pcmcia is
definitely in

(I have a belkin, pcmcia 54g)

any suggestions will be most appreciated



More information about the driverloader mailing list