[driverloader] WPA-PSK fails with Linksys WPC54Gv2 card and WRT54GS router

Michael Reilly michaelr at cisco.com
Wed Aug 18 16:52:02 EDT 2004


I am using driverloader version 2.03 with my WPC54Gv2 card (TI chipset, not 
broadcom) and am using WPA-PSK (wpa_supplicant-0.2.4).  It works perfectly 
when the AP is a Cisco 1100 or 1200.

But when I switch to a Linksys WRT54GS router it fails.  The same ndis 
drivers under windows 2000 work fine so it looks like the WRT54GS is capable 
of WPA-PSK.

I didn't save a copy of the log - I'll get it tonight.  However I recall 
that is fails after step 2/4.  I think the WRT54G disconnects.

Has anyone gotten this to work?

network={
         ssid="ssid_used"
         proto=WPA
         key_mgmt=WPA-PSK
         pairwise=TKIP CCMP
         group=WEP104 TKIP CCMP
         #psk="passphrase"
         psk=hex digits
         priority=2
}

I tried both the passphrase and the hex digits generated by wpa_passphrase.

What should I look for tonight while debugging and capturing the logs?

Thanks,

michael
-- 
---- ---- ----
Michael Reilly    michaelr at cisco.com
     Cisco Systems,  California


More information about the driverloader mailing list