[driverloader] WPC11 ver. 4 Irq conflict

Linuxant support (Jonathan) support at linuxant.com
Tue Aug 31 13:26:02 EDT 2004


Hi,

we provide support only for DriverLoader.

You can download DriverLoader from the following page :

http://www.linuxant.com/driverloader/wlan/downloads-license.php

You can read the installation instructions at

http://www.linuxant.com/driverloader/wlan/install.php

and the FAQ at

http://www.linuxant.com/driverloader/wlan/faq.php

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Minal Mishra wrote:
> Hey,
>    I have used ndiswrapper to load the windows driver. So if you could help
> me with that, it will be really nice.
> the ndiswrapper -l command displays
> bcmw15 hardware present, fuzzy
> bcmw15a hardware present, fuzzy
> r76521na.exe hardware not present
> 
> -Minal
> 
> ----- Original Message ----- 
> From: "Linuxant support (Jonathan)" <support at linuxant.com>
> To: "Minal Mishra" <minalmishra at hotmail.com>
> Cc: <driverloader at lists.linuxant.com>
> Sent: Tuesday, August 31, 2004 6:40 AM
> Subject: Re: [driverloader] WPC11 ver. 4 Irq conflict
> 
> 
> 
>>Hi,
>>
>>could you please send at support at linuxant.com the output of 'dumpdiag'?
>>Type the following in a root shell:
>>
>>---
>>dldrconfig --dumpdiag
>>---
>>
>>Just send us the generated file located in /tmp ('driverloaderdiag.txt').
>>
>>You should also send us the output of the following commands while you
>>are connected :
>>
>>---
>>iwconfig
>>ifconfig
>>ip route
>>arp
>>---
>>
>>All this information will help us solve the problem.
>>
>>Regards,
>>
>>
>>Jonathan
>>Technical specialist / Linuxant
>>www.linuxant.com
>>support at linuxant.com
>>
>>
>>Minal Mishra wrote:
>>
>>>Hey,
>>>    I have a similar problem like David philips'.
>>>"The card links up good and I can configure it manually with ifconfig.
>>>
>>>It sends and receives packets but they can only be seen by tcpdump. A
>>>ping gets host unreachable errors. The ping goes out and a response
>>>comes back only when using static arp tables. The system will not see
>>>arp requests so arp must be disabled to get ping replies.
>>>
>>>When using arp the requests are sent out and answered on the network,
>>>and the responses can be seen on the wlan0 interface with tcpdump. The
>>>arp cache is not updated, so the arp response is not seen."
>>>
>>>Any suggestions what can be possibly done to rectify this problem??
>>>thanks in advance
>>>
>>>Minal
>>>
>>>
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>>_______________________________________________
>>>driverloader mailing list
>>>driverloader at lists.linuxant.com
>>>https://www.linuxant.com/mailman/listinfo/driverloader
>>
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader


More information about the driverloader mailing list