[driverloader] WPA using Intel IPW2100

Linuxant support (Jonathan) support at linuxant.com
Thu Sep 9 15:58:14 EDT 2004


before you attempt to use DriverLoader with WPA, please make sure that 
you are able to use your wireless interface with and without WEP.

Please send at support at linuxant.com the output of 'dumpdiag'. Type the 
following in a root shell:

dldrconfig --dumpdiag

Just send us the generated file located in /tmp ('driverloaderdiag.txt').

You should also send us the WPA supplicant configuration file you have 
tried to use with DriverLoader.

All this information will help us solve the problem.


Technical specialist / Linuxant
support at linuxant.com

Helmut Manck wrote:
> Hello,
> wpa_supplicant (0.2.3), driverloader(2.06), fedora core 
> 2(2.6.6-1.435.2.3.stk16), ndisdriver(from webpage) fails and reports the 
> following:
> [root at laptop wpa_supplicant-0.2.3]# ./wpa_supplicant -i eth1 -c 
> wpa_supplicant.conf -D hostap
> ioctl[PRISM2_IOCTL_HOSTAPD]: Operation not supported
> Failed to initiate AP scan.
> Other versions of wpa_supplicant(0.2.4), driverloader and so on also fail.
> WEP and no encryption works.
> Had anyone success in using wpa in this or similar configuration?
> Best regards, Helmut
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader

More information about the driverloader mailing list