[driverloader] driverloader with Belkin F5D7050 ( USB device )

Linuxant support (Jonathan) support at linuxant.com
Thu Sep 30 11:03:21 EDT 2004


Hi,

everything seems fine the the dump you have provided. We can even see 
that the wireless card was associated (connected) to an access point in 
the past.

Since you are using DHCP under SuSE, it is possible that you will have 
to add the following lines in your '/etc/sysconfig/network/ifcfg-eth1' file:

---
DHCLIENT_MODIFY_RESOLV_CONF='yes'
DHCLIENT_SET_DEFAULT_ROUTE='yes'
---

After you have made changes to the previous file, please run the 
following commands in a root shell to re-activate your wireless interface :

---
ifdown eth1
ifup eth1
---

If you require more assistance, please send at support at linuxant.com the 
output of the following commands entered in a root shell while you are 
close to the access point you are trying to connect to.

---
cat /etc/sysconfig/network/ifcfg-eth1
iwlist eth1 scanning
ifdown eth1
ifup eth1
ifconfig -a
iwconfig
ip route
ip addr
cat /etc/resolv.conf
ping www.linuxant.com -I eth1 -c 5
ping 63.246.159.50 -I eth1 -c 5
tail -f -n 30 /var/log/messages
---

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Valter Hiroshi Ide wrote:
> Hi Guys,
> 
> I am trying to use driverloader with
> my linux box...I just installed 2.06
> version in a linux box ( Linux linux
> 2.4.21-203-default #1 Wed Apr 7
> 22:18:11 UTC 2004 i686 unknown
> )..everything seems ok, installation (
> make install ) was fine, web
> configuration interface was easy
> showing me my driver was installed my
> device was recognized and my license
> was up-to-date.
> But...trying to put this interface (
> eth1 ) up is the problem..even with
> ifup or /etc/init.d/network does not
> work...
> 
> You can see the output of "dldrconfig
> --dumpdiag" in the attachment....it
> seems that my USB device ( Belkin
> F5D7050 ) is not receiving DHCP data
> from my AP...when I tested my USB
> device in windows, everything goes fine...
> 
> My AP is a SMC2804WBRP-G...
> 
> 
> thanks in advance,
> 
> Valter
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader


More information about the driverloader mailing list