[driverloader] driverloader 2.10 not figuring out correct channel/frequency?

[Linuxant support (Jonathan)]

Hi,

in the dump you have provided, we can see that your access point uses 
the channel 11. It is possible that reloading the DriverLoader module 
did fix this problem since the first action for generating the dump is 
to reload the DriverLoader module.

For the "very low signal strength", please note that the values returned 
for the link quality is a logarithmic value, this is why it seems so low.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Pat Smith wrote:
> Hi,
> 
>   When I run iwconfig I have been seeing some very low signal strength
> statistics.  While trying to figure out of the stats were valid or not I
> happened to run iwlist channel.  I was quite surprised to see that my
> Linksys WPC54G v2 card was showing channel 1 as the carrier channel when
> I have set my WRT54G switch to broadcast on channel 11.  Manually
> setting channel/frequency seems to have no effect on this particular
> issue.  I was wondering if you may be able to help me figure this out.
> I have attached the output of dldrconfig --dumpdiag and the output of
> iwlist eth1 channel let me know if you need more info.
> 
> Pat Smith
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader