YNT: [driverloader] U.S.Robotics USR5410, Suse 9.2 and many problems
serefarikan at kurumsalteknoloji.com
Mon Jan 3 22:03:02 EST 2005
well, good news is with kind help of Jelle Vanhove, i managed to get it
work. Jelle sent me version 5 of drivers, and driverloader now activates my
card at boot. Using another clue from mail list archive, i modified the
XX:XX:XX:XX:XX:XX file under config ,setting up wep etc. (i checked the
values using inf file of driver)
Also it seems that setting acpi=noirq is not a must. driverloader seems to
load fine (well most of the time :). but random freezes occur after i assign
the card an ip using dhcp client. The red led on the card is normally
always on. But after some time i assign the ip, it goes of and on , and
during that the system starts to hang, like cpu is 100% used. After some
time (not much, 30 seconds most) my system goes down for good :( and hangs.
Now, what would you recommend me for finding out the reason of this ? Is
this a known issue ? just before the sytem went down, i did a couple of
dmesg 's and saw that the card was being disconnected.
I'm open for suggestions. And please tell me what files i need to send so
that you can help me out with this, since i managed to get pass the wep
problem, i did not write the command. Now this is what i do: i boot the
system, and after that i do the following
iwconfig wlan0 key s:mykeyinascii
ifconfig wlan0 up
ifconfig eth0 down (on board card of laptop)
i hope someone knows the answer ..
Kimden: driverloader-bounces at lists.linuxant.com
[mailto:driverloader-bounces at lists.linuxant.com]Yerine Linuxant support
Tarih: Monday, January 03, 2005 6:09 PM
Kime: Seref Arikan
Bilgi: driverloader at lists.linuxant.com
Konu: Re: [driverloader] U.S.Robotics USR5410, Suse 9.2 and many
please send at support at linuxant.com the full and exact command you have
attempted to use to set your WEP key. You should also tell us what is
the version of the DriverLoader package which is currently installed.
You can obtain this information in the output of the 'dldrconfig
--version' command in a root shell.
Did you tried to disable WEP on your access point to see if you are able
to set up the wireless connection with the 126.96.36.199 Windows XP driver?
Technical specialist / Linuxant
support at linuxant.com
Seref Arikan wrote:
> well this may be a long one, but i hope someone will help me. I have just
> set up suse 9.2 on a hp compax nx9005 laptop, and also have a usr 5410
> wireless card. This is my probably 10th attempt at setting up this card,
> i have not given up yet.
> I remove acx_pci stuff, and set up driver loader. After setting up latest
> version, i try to upload the files from linuxant site, and unfortunately
> card is never powered up . although in some of my attempts , it actually
> powered up and worked !!! but that was just until i rebooted and i never
> it work again.
> When i upload the files from the latest version of driver, things look so
> much smoother, at least the hardware is recognised. (i found out that
> passing kernel acpi=noirq parameter makes things more stable since irq's
> seem to be a problem)
> However with latest version of driver (DriverVer=06/28/2004,188.8.131.52), i
> can't pass the access point password. I get an error that says setEncode
> something failed, and the operation is not supported. I can set the
> with the drivers supplied in linuxant site, but that one does not power up
> the card. How can i pass this password ? Is there a way other than
> wlan0 key s:mykeyinascii ? by the way, i've tried to test the lates driver
> with a ad-hoc connection, and even if there were many problems, it worked.
> So setting the key seems to be my next logical step to connect to AP.
> I am not mentioning many other problems, since i think after i can connect
> to AP somehow, i can deal with them one by one (hopefully). Any help is
> appreciated a lot,
> Best Regards
> Seref Arikan
> driverloader mailing list
> driverloader at lists.linuxant.com
driverloader mailing list
driverloader at lists.linuxant.com
More information about the driverloader