[driverloader] broadcom-based 54g adapter support was broken recently

Linuxant support (Jonathan) support at linuxant.com
Thu Jan 6 10:01:49 EST 2005


Hi,

please re-install DriverLoader 2.23 and then do a complete shutdown of 
the machine (power-off). Reboot the machine to see if there is a 
difference with DriverLoader.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Max wrote:
> My Belkin 54g PCI adapter does not work under driverloader 2.22 and 2.23.
> Driverloader reports the following:
> 
> driverloader: bcmwl5.sys: 0xf9c31000..0xf9c71e00 entry = f9c358c8 (pbase 
> = 0x10000)
> ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
> 0000:00:07.0: cache line size not set; forcing 16
> driverloader: NdisWriteErrorLogEntry: ErrorCode=DRIVER_FAILURE 
> NumberOfErrorValues=1
> driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x00000106
> driverloader: NdisWrapInitializeThread_stk: init failed, retrying with 
> workaround (0x18000000/0x18000000)driverloader: NdisWriteErrorLogEntry: 
> ErrorCode=DRIVER_FAILURE NumberOfErrorValues=1
> driverloader: NdisWriteErrorLogEntry: ErrorValue 0=0x00000106
> wlan1: failed to initialize adapter (err = -5)
> wlan1: Failed to register net device (-5)
> driverloader: probe of 0000:00:07.0 failed with error -5
> 
> The same adapter (and the same windows driver) works fine under 
> driverloader 2.20 and earlier.
> 
> Max
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader


More information about the driverloader mailing list