[driverloader] /sbin/ifup: configuration for eth1 not found.

Linuxant support (Jonathan) support at linuxant.com
Mon Feb 21 10:10:46 EST 2005


Hi,

the '/etc/sysconfig/network-scripts/ifcfg-eth1' wireless configuration 
file will be created by the 'neat' tool under Fedora Core 3, this is the 
network configuration tool. Please configure your wireless interface 
with this toll, it will fix the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


Ulvi Cetin wrote:
> Hi,
> 
> I recently installed the latest RPM driverloader on FC
> 3. I see that the wireless card is loaded and ready as
> eth1 (from dmesg). But when I try to start the
> interface I get this message:
> 
> /sbin/ifup: configuration for eth1 not found.
> 
> I don't see any configuration files under
> /etc/sysconfig/network-scripts for eth1. Any
> suggestions? Thanks.
> 
> Here is the dmesg message for driverloader:
> 
> driverloader: bcmwl5.sys: 0xf0b5e000..0xf0bb8180 entry
> = f0b69dd2 (pbase = 0x10000)
> ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level,
> low) -> IRQ 201
> 0000:02:02.0: cache line size not set; forcing 32
> divert: allocating divert_blk for eth1
> eth1: New link status: Disconnected (0002)
> eth1: WPA, AES, TKIP, WEP128, WEP64 supported
> eth1: at 0000:02:02.0 (MAC address 00:0B:7D:17:6D:E8) ready
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Mail - Easier than ever with enhanced search. Learn more.
> http://info.mail.yahoo.com/mail_250
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader


More information about the driverloader mailing list