[driverloader] Build errors running dldrconfig against 2.6.10-9-amd64-k8 kernel

David Leaman linuxant at pimpninja.org
Mon Mar 21 15:33:42 EST 2005


Hi,

Since I switched to a gcc-3.4 system I am no longer getting the 'Invalid
module format' error I was getting before, but now I do have build
problems when I run `dldrconfig`. I tried a couple of kernels, and got
similar results. Here is the 'dldrconfig-buildlog.txt' from when I tried
to install on a 2.6.10-9-amd64-k8 kernel:
http://pimpninja.org/txt/dldrconfig-buildlog.txt

And here is my dumpdiag:

http://pimpninja.org/txt/driverloaderdiag.txt

Cheers,

-D

> Hi,
>
> you have sent us the 'dumpdiag' instead of the
> 'dldrconfig-buildlog.txt' file which we need to fix the problem.
>
> Please let us know if you require more assistance.
>
> Regards,
>
>
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support at linuxant.com
>
>
> ----- Original Message -----
> To: support at linuxant.com
> Sent: Thursday, March 17, 2005 5:14 PM
> Subject: Re: [driverloader] 'Invalid module format' error on AMD64 w/
> kernel 2.6.10 [eid-20050316-17a]
>
> Hi,
>
> I decided to go ahead and reinstall Linux, but this time I chose a port
> that is compiled with gcc-3.4. I checked to make sure the kernel and
> driverloader were using the same gcc, and now I'm getting a different
> error. Could you plesae let me know if you can tell what's wrong?
> Attached are my dldrconfig-buildlog.txt after running dldrconfig and my
> driverloaderdiag.txt.
> Cheers,
> -David Leaman
>
>> Hi,
>>
>> I don't know how to fix the problem, it seems that the kernel kbuild
>> system is still using a wrong version of GCC. You could try to remove
>> gcc-3.3 from your system, it might fix the problem.
>>
>> Regards,
>>
>>
>> Jonathan
>> Technical specialist / Linuxant
>> www.linuxant.com
>> support at linuxant.com

-- 
:eof




More information about the driverloader mailing list