[driverloader] I lose the configuration after the reboot
becky.bositampen at tele2.ch
Tue May 17 16:57:50 EDT 2005
Is this problem because of module driverloader has not GPL license? Im
testing a free trial license.
If I take a permanent license, I will always have the same problem?
What is a GPL license??
De : driverloader-bounces at lists.linuxant.com
[mailto:driverloader-bounces at lists.linuxant.com] De la part de Anders
Envoyé : mardi, 17. mai 2005 11:54
À : Driverloader
Objet : RE: [driverloader] I lose the configuration after the reboot
You don't have to do anything.
Read the link to tux.org in Your message and You will get an explanation.
It just tells You you're loading something "not GPL" (which in fact is
Thank you for this solution. It enabled me to solve my problem. Now, I
keep the configuration of the wireless to each reboot. But, when I load
DriverLoader with "modprobe driverloader", I have the following message:
"Warning: loading /lib/modules/2.4.20-31.9/extra/driverloader.o will taint
the kernel: non-GPL license - see LICENSE file; Copyright (c)2003-2004
See http://www.tux.org/lkml/#export-tainted for information about tainted
Module driverloader loaded, with warnings"
I read the explanation but I did not understand well. Why this message?
What do I have to make moreover for this problem?
De : Linuxant support (Jonathan) [mailto:support at linuxant.com]
Envoyé : lundi, 16. mai 2005 17:33
À : Becky Bositampen
Cc : driverloader at lists.linuxant.com
Objet : Re: [driverloader] I lose the configuration after the reboot
do you absolutely need to use the 'cardctl insert' command or else it
will not work at all? If this is the case, then the problem is unlikely
related to DriverLoader. You could try the following workaround to fix
the problem. Under Red Hat 9.0, please edit the file '/etc/rc.local' and
at the end of this file, please add the following lines:
In the last line, you should replace <iface> with the name of the
wireless interface used by DriverLoader, for example, eth1.
Technical specialist / Linuxant
support at linuxant.com
Becky Bositampen wrote:
> After the reboot, I lose the wireless configuration. I check with the
> network configuration tool of my Linux, the wireless is deactivated. To
> reactivate it, I run "cardctl insert": the wireless card is on then I
> the Web Configurator, I upload the Windows XP driver. The wireless is
> activated, the connection is established. I must make this handling with
> each reboot. How to avoid that?
> I'm using the latest version of DriverLoader 2.27. I installed it with
> Thanks a lot,
> -----Message d'origine-----
> De : Linuxant support (Jonathan) [mailto:support at linuxant.com]
> Envoyé : vendredi, 13. mai 2005 12:18
> À : Becky Bositampen
> Cc : driverloader at lists.linuxant.com
> Objet : Re: [driverloader] I lose the configuration after the reboot
> for the configuration problem, if you use low level tools such as
> 'iwconfig' and 'ifconfig' to configure the wireless interface, it is
> normal that these settings are not remembered after a reboot. We
> recommend that you use the network configuration tool provided in your
> Linux distribution to configure the wireless interface.
> Since you are using a CardBus (32-bit PCMCIA) wireless card, please make
> sure that you are using the latest version of DriverLoader (currently
> 2.27) as in this version we have introduced a workaround for a problem
> to start on boot the wireless interface on some machines with CardBus
> wireless cards.
> If the 'device is busy' error message is generated because of
> DriverLoader, then please try with different versions of the Windows XP
> driver, it is possible that one of them will fix the problem.
> Alternatively, you could try to run the 'dldrstop' command in a root
> shell just before you reboot the machine.
> Technical specialist / Linuxant
> support at linuxant.com
> Becky Bositampen wrote:
>>I installed and configured the " DriverLoader " the Trial version under
>>Redhat 9 Kernel 2.4.20-31.9 i686 for my CardBus Wireless Linksys 802.11G
>>Broadcom. Everything works well. I have connection. But when I reboot
>>machine, I lose the configuration. I must again reconfigure the
>>driver. At the machine shutdown, the filesystem /usr is not
>>dismounted, I have the message " device is busy ".
>>What must I make to maintain the configuration of the driver and well to
>>dismount the /usr during the shutdown ?
>>driverloader mailing list
>>driverloader at lists.linuxant.com
> driverloader mailing list
> driverloader at lists.linuxant.com
driverloader mailing list
driverloader at lists.linuxant.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the driverloader