[driverloader] No DHCPOFFERS received.

Paul Warner paulwwarner at yahoo.com
Mon May 1 07:40:42 EDT 2006


Hi,

I am running the Netgear WG511v2, and with Linuxant
I've been able to get my Ubuntu 5.10 system (running
on an old Thinkpad T21 with a Pentium III processor)
to see and activate the card.  And I have established
that the card connects to the network when I have no
security enabled.  I want to enable WPA-PSK, so I
downloaded and installed dldrwpaconfig.  But following
all the steps, I have been unable to get it to
connect.  I have the wlan0 card set to use the right
network, and have set it to use an ASCII passphrase,
and left WEP blank.

The dhclient can't connect.  Any ideas what is going
on?

Thanks,
Paul


output from dldrwpaconfig:
me at mycomputer:/etc$ sudo /usr/sbin/dldrwpaconfig
dldr_wpa_supplicant version 0.4.7.0.

Before you try to configure your wireless interface to
use WPA, please make
sure that you have configured your wireless interface
using the network
configuration tool provided in your Linux
distribution. You should configure
the wireless interface with WEP disabled.

Automatically selected the wireless interface 'wlan0'.
Supports WPA with TKIP.

Automatically selected the access point with ESSID
'our-home-network'.

This configuration script only supports WPA-PSK
("WPA-Personal"), do you
want to configure your wireless interface to use only
WPA-PSK? [yes]
Do you want to use a (H)EX pre-shared key or an
(A)SCII passphrase? [A]
Please enter a passphrase between 8 and 63 characters
(inclusive) :
long-string-here

Saving the configuration file...  Done.
Reactivating the 'wlan0' interface...
ifdown: interface wlan0 not configured
There is already a pid file
/var/run/dhclient.wlan0.pid with pid 1
Internet Systems Consortium DHCP Client V3.0.2
Copyright 2004 Internet Systems Consortium.
All rights reserved.
For info, please visit
http://www.isc.org/products/DHCP

sit0: unknown hardware address type 776
SIOCSIFFLAGS: Input/output error
sit0: unknown hardware address type 776
Listening on LPF/wlan0/00:0f:b5:8c:fa:3b
Sending on   LPF/wlan0/00:0f:b5:8c:fa:3b
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 3
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 6
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 8
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 21
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 16
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67
interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
Done.


output of dmesg:
[4309729.940000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE retrying..
[4309730.041000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE retrying..
[4309730.142000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE W=0 N=0
[4309730.142000] wlan0: Error -5 setting desired SSID
[4309730.142000] wlan0: Unable to configure card;
resetting...
[4309730.142000] wlan0: Error -95 setting txpower (0)
[4309730.142000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE retrying..
[4309730.243000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE retrying..
[4309730.344000] driverloader: ndisSetInformation:
802_11_SSID st=FAILURE W=0 N=0
[4309730.344000] wlan0: Error -5 setting desired SSID
[4309730.344000] wlan0: Error -5 configuring card
[4309730.344000] wlan0: netndis_reset: Error -5
reenabling card

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


More information about the driverloader mailing list