[hcflinux] e-tech 127A:1035 is working

[Alex Groenewoud]

Just reporting that the device 127A:1035 (its name under windows: 
E-TECH PCI56RWM Modem) is working with the hcfpcimodem driver.
For documentation:


The relevant part of  lspci -v :

00:09.0 Communication controller: Rockwell International HCF 56k 
PCI Speakerphone Modem (rev 08)
	Subsystem: Rockwell International HCF 56k PCI Speakerphone Modem
	Flags: bus master, medium devsel, latency 32, IRQ 5
	Memory at d5000000 (32-bit, non-prefetchable)
	I/O ports at e800
	Capabilities: [40] Power Management version 2


The result of  listmodem.sh :

=============================================================
=                  RESULT OF MODEM QUERY                    =
=============================================================

MODEM #1:
  PCI CONFIGURATION INFORMATION READ:
     Vendor Id         : 127A
     Device Id         : 1035
     Revision Id       : 08
     Sub Vendor Id     : 127A
     Sub Device Id     : 1035

  DEDUCED INFORMATION:
     Vendor Name       : CONEXANT
     Device Name       : HCF P85 Data/Fax/Voice/Speakerphone
     Modem Type        : HCF
     Download Site     : HCF MODEM driver download is currently not 
available


Nevertheless I downloaded the tar package
hcfpcimodem-0.97mbsibeta02070500.tar.gz
and tried to compile it.
After setting in modules/common.mak the variable
KERNELSRC= /usr/src/linux
the package compiled on my SuSE 7.0 machine (2.2.16 kernel).

Then hcfpciconfig autoconfigured the modem fine,
and yast detected it.

Thank you, Marc, for this driver!

Alex