[hcflinux] mod_osspec.c:52: `cnxtusbhcf_OsLockTryUnlock' undeclared here (not in a function)

[Miles Lane]

Hi Marc,

Thanks.  That fixed it.  I did notice two anomalies.
When running hcfusbconfig, I get this:

         Your HCF modem should now be accessible as /dev/ttySHCFUSB0

But, when I look in /dev, I find "ttySHCF0" and not "ttySHCFUSB0".
Another question I have is regarding the chip identification.
When I ran "make install", I get no chip identification.  Instead, I get:

         Selected USB VendorID= DeviceID=
         and INF file /etc/hcfusb/inf/hcfusbc2_linux.inf
         gawk: cmd. line:37: warning: escape sequence `\)' treated as 
plain `)'
         gawk: cmd. line:37: warning: escape sequence `\(' treated as 
plain `('
         gawk: cmd. line:37: warning: escape sequence `\)' treated as 
plain `)'
         gawk: cmd. line:37: warning: escape sequence `\(' treated as 
plain `('

I have "GNU Awk 3.1.1".

Here's what the device detection shows in my kernel log:

hub.c: new USB device 10:19.0-2, assigned address 3
usb.c: kmalloc IF d10cdee0, numif 2
usb.c: skipping descriptor 0x24
usb.c: skipping descriptor 0x24
usb.c: skipping descriptor 0x24
usb.c: skipping descriptor 0x24
usb.c: skipping descriptor 0x24
usb.c: skipped 5 class/vendor specific endpoint descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=6
usb.c: USB device number 3 default language ID 0x409
Manufacturer: HCF USB V.90 Data/Fax Modem
Product: Apple internal modem
SerialNumber: µ0000001
usb.c: usbhcf driver claimed interface d10cdef8
osusb.c: usbhcf is detected
usb.c: usbhcf driver claimed interface d10cdee0
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 1, portstatus 100, change 0, 12 Mb/s
hub.c: port 2, portstatus 103, change 2, 12 Mb/s
hub.c: port 2 enable change, status 103


On Monday 21 April 2003 02:36 pm, Marc Boucher wrote:
 > This issue should be fixed in today's hcfusbmodem-0.98lnxtbeta03042100ppc
 > release.
 >
 > Marc