[hcflinux] Re: No dialtone or DTMF signals heard no matter what I do

[Karl Scheel]

Cancel that request!  All that I needed to do after making the changes 
was to reboot in order to be able to hear my modem as I was dialing out! 
Until now, I didn't know that it was necessary in Linux when making 
changes such as these; I thought that all I had to do was log-out from 
root and then log back in again as a user. I apologize for the 
oversight, and for sending my last message in HTML format.

Thank you very much, Marc, for solving my problem.

Linux rules!







Karl Scheel wrote:

> Dear Marc:
> I set the OEM FLAGS in /etc/hcfpci/current.inf to the same values as 
> those in the attached aop8004.inf file. I also set Country#20's (i.e. 
> Canada's) RELAYS parameters in /etc/hcfpci/current.cty to the same 
> values as those in this file (with trailing zeros on each line to make 
> it 32 bits long); I did not need to change Country#20's FLAGS as they 
> were already identical. However, I was still unable to hear the dial 
> tone and DTMF signals as my AOpen FM56-P modem went off-hook and 
> dialed the number. The good news is that although there was no 
> improvement, things didn't get any worse.
>
> In addition to the aop8004.inf file, I am also including the 
> aop8004.cty file. Perhaps after viewing them, you will be able to 
> offer some additional suggestions as to how I may solve my problem. I 
> have been away from this forum for a long time; so if the problem no 
> longer exists, please let me know.
>
> Thank you very much! And I do apologize for taking so long to get back 
> to you; I have been very busy.
>
> Karl
>
>