[hcflinux] /dev/ttySHCF0 does not exist

Linuxant modem support modem.support at linuxant.com
Tue Jul 15 15:45:28 EDT 2003


Hi,

did it work?

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message ----- 
From: "Celui" <uroboros62 at yahoo.es>
To: "Linuxant modem support" <modem.support at linuxant.com>;
<hcflinux at lists.mbsi.ca>
Sent: Saturday, July 05, 2003 5:41 AM
Subject: Re[4]: [hcflinux] /dev/ttySHCF0 does not exist


Hello, Jean-Simon Durand.

Thanks for your assistance.

Regards,
  Celui.

============================================================================
===
Lms> You seem to have an IRQ assignment problem accoring to the output of
dmesg.

Lms> ---
Lms> PCI: No IRQ known for interrupt pin A of device 00:0b.0. Please try
using
Lms> pci=biosirq.
Lms> ---

Lms> Please try to boot your kernel with the option "pci=biosirq" as
suggested.

Lms> If that doesn't work, you can try playing with the kernel options
"noapic",
Lms> "acpi=off" and/or "apm=off".

Lms> If that doesn't work, you can try to configure and install a generic
kernel
Lms> with the ACPI patches found on this web site:
Lms> http://sf.net/projects/acpi

Lms> You will then need to use the generic HCF driver (instead of a driver
Lms> specific to one distribution/kernel) and compile the modules with
Lms> "hcfpciconfig".

Lms> Regards,

Lms> Jean-Simon Durand
Lms> Technical specialist / Linuxant
Lms> www.linuxant.com
Lms> modem.support at linuxant.com




More information about the hcflinux mailing list