[hcflinux] AOpen FM56-PX

[Linuxant support]

Hi,

the full version of the driver is required for voice support. Also, you need
a modem with datapump version 73, which seems to be your case.

We did not do extensive testing of the voice functionnality, but it should
work.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


----- Original Message ----- 
From: "Scott" <Scott at notch.ca>
To: <hcflinux at lists.linuxant.com>
Sent: Wednesday, October 08, 2003 7:37 PM
Subject: [hcflinux] AOpen FM56-PX


I have just purchased an aopen FM56-PX modem.

I wish to use this to answer incoming calls and run programs depending on
what dtmf tones are entered ( e.g. vgetty will run "program *123#" )

What features do I require to make dtmf tones work?  Do I need voice to be
working?

I do not wish to use the modem for data connections so can I use the free
driver to get these features?  In the future I may also wish to play with
voice.  Does the free driver cover voice?

I installed the free driver and the following is what I got:

listmodem:
=============================================================
= RESULT OF MODEM QUERY =
=============================================================
MODEM #1:
PCI CONFIGURATION INFORMATION READ:
Vendor Id : 14F1
Device Id : 10B6
Revision Id : 1
Sub Vendor Id : A0A0
Sub Device Id : 00C2
DEDUCED INFORMATION:
Vendor Name : CONEXANT
Device Name : HCF Data/Fax/RemoteTam/Speakerphone
Modem Type : HCF
Download Site : http://www.linuxant.com/

ATI6:
DP Part 73
DP Rev BA
V90 SPX RAM Ver 65
V90 CTL RAM Ver 65
OK

error log:
[...]

It seems from the log that the voice portion may not work.  Does this mean
DTMF will not work?  I will not be able to connect to a phone line until
tomorrow to test anything so any insight will be greatly appreciated.

Thanks in advance.

Scott