[hcflinux] Re: mandrake 9.2 and hcf -AopenFM56-PX

[Linuxant support]

Hi,

"/dev/ttySHCF0" is a virtual serial interface and the software modem does
not use a COM port.

The best way to test is to use a terminal software like 'minicom'. You can
configure it to use "/dev/ttySHCF0" as the modem device to see if it
responds to "AT" commands and if you can dial with "ATDT 555-1234".

If you are having problems sending commands to the modem, you can run
"hcfpciconfig --dumpdiag" in a root shell and send us the file generated in
'/tmp' at support at linuxant.com.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


----- Original Message ----- 
From: "cn" <ctn52796 at centurytel.net>
To: <hcflinux at lists.linuxant.com>
Sent: Sunday, December 21, 2003 12:57 AM
Subject: [hcflinux] Re: mandrake 9.2 and hcf -AopenFM56-PX


Hopefully my text will not run off the screen this time....

I found this in a previous post... does this mean that I need to change my
/dev/ttySHCF0 to /dev/ttySHCF2. Is that why the modem isn't working. I also
noticed that I don't have a /mnt/modem, is this normal. I think I will try
to
reinstall and see what happens.

"Usually something line /dev/ttyS[x] where x is:
  0 for COM1
  1 for COM2
  2 for COM3
  ...etc..."
http://www.linuxant.com/pipermail/hcflinux/2003q2/000757.html