[hcflinux] Problems dialing out...

[Elwyn Campbell]

Changing the FLAGS and RELAYS settings worked - I'm emailing you from
Evolution now!

I had to change the FLAGS under /etc/hcfpci/current.inf as well.

thanks for your help,
Elwyn

On Wed, 2003-05-28 at 17:10, Elwyn Campbell wrote:
> Yes, I tried substituting the FLAGS and RELAYS from the windows .inf
> file, but neglected to change them to 32 bit values. As a result I
> cannot hear the dialtone for the line at all now.
> 
> I'll change these to 32 bit values and let you know of the result.
> 
> Elwyn
> 
> > Hi,
> > 
> > this can be related to the country parameters. Since your modem works
> under
> > Windows, you can try importing the values of the FLAGS and RELAYS from the
> > modem's INF file under Windows to the modem's country INF file under Linux
> > (/etc/hcfpci/current.cty). Note that this file gets overwritten if you
> > reconfigure the modem with hcfpciconfig.
> > 
> > The RELAYS under Windows are 16 bits, but they are 32 bits under Linux so
> > you must add ,00,00 to each line after importing the Windows values.
> > 
> > You are the second person from Australia to report this problem. The other
> > user didn't confirm yet if importing the RELAYS ans FLAGS fixed his
> problem.
> > 
> > Please let us know about your results.
> > 
> > Jean-Simon
> > 
> > 
> 
> _______________________________________________
> hcflinux mailing list
> hcflinux at lists.mbsi.ca
> http://www.mbsi.ca/mailman/listinfo/hcflinux
>