[hcflinux] False "Busy signal detected" error

[Linuxant support (Jonathan)]

Hi,

if you are behind a PBX or similar equipment, please try without it to 
see if there is a difference.

You could also try to make a non-FAX dial up connection just to make 
sure that the FAX feature is not the source of the problem.

Finally, you could try under Windows with the same setup to see if you 
have the same problem or not.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



zaw - Ipguys wrote:
>    
>                                                                                              
>                          
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
> Hi,
> 
> I’ve got error busy signal detected, but the line is not busy at all. 
> Any idea, I can’t hear the speaker even it was on.
> 
> I tried  AT &F X1 and check the country code as well.
> 
>  
> 
> Unknown speaker volume "on"; using "quiet"
> 
> Sep 13 10:24:05 gtivoip03 FaxSend[3102]: MODEM ROCKWELL 
> RC288DPi/hcfpcimodem-1.10full
> 
> Sep 13 10:24:06 gtivoip03 FaxSend[3102]: SEND FAX: JOB 9 DEST 20 COMMID 
> 000000034 DEVICE '/dev/ttySHCF0' FROM 'root <root at gtivoip03>' USER root
> 
> Sep 13 10:24:15 gtivoip03 FaxSend[3102]: SEND FAILED: JOB 9 DEST 20 ERR 
> Busy signal detected
> 
> Sep 13 10:24:34 gtivoip03 FaxGetty[2220]: MODEM ROCKWELL 
> RC288DPi/hcfpcimodem-1.10full
> 
>  
> 
> Thanks,
> 
> Zaw
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>  
> 
>                                                                                                             
>                                    
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> hcflinux mailing list
> hcflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hcflinux