Linux version 2.4.18-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable)
 BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data)
 BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 32764
zone(0): 4096 pages.
zone(1): 28668 pages.
zone(2): 0 pages.
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux ro root=307 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 902.084 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1795.68 BogoMIPS
Memory: 125732k/131056k available (1389k kernel code, 4936k reserved, 406k data, 120k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
kinoded started
VFS: Diskquotas version dquot_6.5.0 initialized
ACPI: APM is already active, exiting
vesafb: framebuffer at 0xf0000000, mapped to 0xc880d000, size 32768k
vesafb: mode is 1024x768x16, linelength=2048, pages=0
vesafb: protected mode interface info at c000:0f34
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (1024x768, 42648 bytes).
Console: switching to colour frame buffer device 105x34
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
PCI: Found IRQ 9 for device 00:09.0
PCI: Sharing IRQ 9 with 00:05.0
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: ST340823A, ATA DISK drive
hdb: LITEON DVD-ROM LTD122, ATAPI CD/DVD-ROM drive
hdc: R/RW 4x4x32, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c031ece4, I/O limit 4095Mb (mask 0xffffffff)
hda: safely enabled flush
hda: 78165360 sectors (40021 MB) w/1024KiB Cache, CHS=4865/255/63, UDMA(66)
hdb: no flushcache support
hdb: ATAPI 40X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.99
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 16 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.99
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing............done.
Freeing initrd memory: 583k freed
VFS: Mounted root (ext2 filesystem).
hdc: no flushcache support
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: IDE-CD    Model: R/RW 4x4x32       Rev: 1.4B
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 120k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Adding Swap: 409616k swap-space (priority 42)
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:0b.0
eth0: RealTek RTL8139 Fast Ethernet at 0xcaa84000, 00:50:22:40:04:69, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:04.2
PCI: Sharing IRQ 5 with 00:04.3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:04.3
PCI: Sharing IRQ 5 with 00:04.2
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x46d/0xd001) is not claimed by any active driver.
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
PCI: Found IRQ 9 for device 00:05.0
PCI: Sharing IRQ 9 with 00:09.0
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
lp0: compatibility mode
lp0: compatibility mode
lp0: compatibility mode
eth0: no IPv6 routers present
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
PCI: Found IRQ 9 for device 00:09.0
PCI: Sharing IRQ 9 with 00:05.0
HCF ASIC ID: 210
HCF DATAPUMP PART: '71' REV: 'BA'
3973300.313: BOND OPTION ERROR 1
3973300.313: DEVMGR ERROR: DpReset: DpGetBondOption???
3973300.313: DEVMGR ERROR!!!! DpReset returns FALSE, attempt=0