[hsflinux] MODEM NOT WORKING ON Presario 919EA

Sudden Martes s_martes27 at yahoo.co.uk
Mon Jan 6 18:24:50 EST 2003


Sudden Martes <s_martes27 at yahoo.co.uk> wrote: > Hello -  I will be
grateful if you can help me troubleshoot my modem
 
I installed the rpm for my Winmodem from the Conexant web site
There was an initial error:
pcilib: Cannot open /proc/bus/pci
pcilib: Bus 00 seen twice (firmware bug). Ignored.
The rpm driver for the modem was installed OK
 
After this
When I open minicom - it says configuration file cannot be found - 
using defaults
 
 In the Network config tool - Cannot activate network device ppp0

when I do cat /dev/modem - ir says device not found
 
The contents of the wvdial.conf file:
> [Modem0]
> Modem = /dev/modem
> Baud = 57600
> SetVolume = 2
> Dial Command = ATDT
> Init1 = ATZ
> FlowControl = Hardware (CRTSCTS)
> [Dialer AOL]
> Username = smartes
> Password = dept9
> Phone = 08089969000
> Stupid Mode = 1
> Inherits = Modem0
> 
What can I do now? Please help!


__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com



More information about the hsflinux mailing list