[hsflinux] Conexant modem

Salvatore Scarcella sscarcel at libero.it
Tue Mar 11 21:58:23 EST 2003


Dear Sirs,

As from a previuos mail I have RedHat 8.0, Kernel 2.4.18-24.8.0 on a Pc Intel P4 and still cannot connect to Internet.

 Modem is a CXT CONEXANT Softk56 Data Fax Voice Speakerphone.

 I followed these steps:

1) 'rpm -ivh hsflinnmodem-doc-5.03.27mbsibeta02122600-1'.
at end program asked to recompile the modules and result is :
Re-compilation and installation of HSF modules succeeded....
/dev/modem or /dev/ttySHSF0.

With command
2) # wvdialconf /etc/wvdial.conf
Found a modem on /dev/ttySHSF0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf
ttySHSF0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

3)
Using # kppp 
I filled masks ...
Connection: Libero
Username: sscarcel at libero.it (same as in windows xp)
Password: *********          (    "                      "      )
Account : Libero
Device : /dev/modem
Flux Control: CRTSCTS
Line End: CR/LF
Speed connection: 115200 :

When doing connection:
modem ready, can hear dial  for 10 seconds and in debug window
ATZ OK
ATML1 OK
ATDT0112751010
NO DIAL TONE

Could help please, Regards
Salvatore Scarcella
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.linuxant.com/pipermail/hsflinux/attachments/20030311/b80ad31e/attachment.htm


More information about the hsflinux mailing list