[hsflinux] Problems to load HSF modules with RedHat 9 - Kernel2.4.20-19.9 (original)

[Linuxant modem support]

Hi,

unresolved symbols errors usually mean that the driver modules were compiled
with a kernel source tree different from the one that was used to compile
your currently running kernel.

The easiest way to fix this is probably to configure, compile and install a
custom kernel. Then, boot your custom kernel and run
"hsfconfig" to compile the modem driver modules using the proper kernel
sources.

Regards,

Jean-Simon Durand
Technical specialist / Linuxant
www.linuxant.com
modem.support at linuxant.com


----- Original Message ----- 
From: <carlos.lst at expresso.com.br>
To: <hsflinux at lists.linuxant.com>
Sent: Wednesday, August 13, 2003 11:57 PM
Subject: [hsflinux] Problems to load HSF modules with RedHat 9 -
Kernel2.4.20-19.9 (original)



Hi, I'm having problems to load the HSF modules, the messages returned from
modprobe:

e-compiling HSF modules for kernel 2.4.20-19.9, using source directory
/lib/modules/2.4.20-19.9/build. Please wait..
Re-compilation and installation of HSF modules succeeded.
depmod: *** Unresolved symbols in /lib/modules/2.4.20-19.9/misc/hsfosspec.o
depmod:         flush_signals
depmod:         filp_open
depmod:         __wake_up
depmod:         complete
depmod:         remove_wait_queue
depmod:         filp_close
depmod:         wait_for_completion
depmod:         add_wait_queue
depmod:         complete_and_exit
depmod:         irq_stat
depmod:         default_llseek
depmod: *** Unresolved symbols in /lib/modules/2.4.20-19.9/misc/hsfserial.o
depmod:         proc_root_driver
depmod:         __wake_up
depmod:         tty_unregister_driver
depmod:         tty_register_driver
depmod:         create_proc_entry
depmod:         tty_get_baud_rate
depmod:         remove_wait_queue
depmod:         tty_register_devfs
depmod:         proc_mkdir
depmod:         interruptible_sleep_on
depmod:         remove_proc_entry
depmod:         tty_flip_buffer_push
depmod:         tty_hangup
depmod:         add_wait_queue
depmod:         tty_hung_up_p
depmod:         tty_wait_until_sent

Your HSF modem should now be accessible as /dev/ttySHSF0
or through the symbolic link /dev/modem.
----------------------------
Enviroment:
ECS Desknote A928 - P4 1.7Ghz
Kernel 2.4.20-19.9 - Upgraded from Red Hat (Original RPM)

----------------------------

[...]

Thanks  for any help...

-- 
Carlos Diego Russo Medeiros
Security Officer - System Administrator
MCSO - Modulo Certified Security Officer
CCNA - Cisco Certified Network Associate

_______________________________________________
hsflinux mailing list
hsflinux at lists.linuxant.com
https://www.linuxant.com/mailman/listinfo/hsflinux