[hsflinux] Two hsflinmodem on the same machine..

[mimmo.lariccia at vivacity.it]

Well.. It's not like You say..
The new (limited!) Driver find only the first one and the second isn't
ever detected..
So Your suggest "hsfconfig --unit=1" isn't applicable..
Best the old one.. It gave me the possibility of "choose" the module to
compile..
Who leave the old way.... ;-)
By!

> Date: Mon, 15 Sep 2003 09:56:08 -0400
> From: Marc Boucher <marc at linuxant.com>
> Subject: Re: [hsflinux] Two hsflinmodem on the same machine..
> To: mimmo.lariccia at vivacity.it
> Cc: hsflinux at lists.linuxant.com
> Message-ID: <20030915135608.GB26382 at endlich.mbsi.ca>
> Content-Type: text/plain; charset=us-ascii

> Hi,

> On Mon, Sep 15, 2003 at 11:03:39AM +0200, mimmo.lariccia at vivacity.it wrote:
> > Hi all!
> > I have the problem You read in the subject.
> > I have to use two win-modem (hsflinmodem), on the same machine.
> > I try to change the settings by hsfconfig, but it enables only one modem
> > for time.
> > When I want to change the active modem, I have to reload the hsfconfig
and
> > select the first or the second.
> > Is there a way to set both modem as active and "select" the first or the
> > second from KPPP?
> > And again: is possible to use both modem with kppp?

> Yes, you need the newest version of our driver
> (hsfmodem-6.03.00lnxt03091200 at the time of this writing).

> Old beta versions of our HSF driver didn't support more than one instance,
> but the new version (called hsfmodem, not hsflinmodem) does.

> After upgrading, the first modem should appear as /dev/ttySHSF0, and the
> second one as ttySHSF1.

> Use the --unit=0 or --unit=1 option to hsfconfig to select which
> modem to configure.

> Cheers
> Marc