[hsflinux] Lockup on kernel 2.6.5 [eid-20040507-f7c]

William John Murray w.murray at rl.ac.uk
Sun May 9 21:43:17 EDT 2004


 Hello Simon,
             Argh!! Sorry, I boobed. I did not have my key in.
When I add my $15 key - the modem locks up, just like
yours did.
   In case it helps anyone, it also used the sound channel. It
had been quiet with the 14K driver.
     So no, FC2-T3 does NOT work.
            Apologies,
                    Bill
On Sat, 2004-05-08 at 18:33, MadPenguin wrote:
> Hi Jonathan
> 
> Thanks for the advice.  Sorry I forgot to mention - I
> was using the latest driver version on a 2.6.5-rc3
> kernel under Fedora Core 1.    The same driver works a
> treat on the old stock FC1 2.4.22-1.2174.nptl kernel
> (licensed).  Good to see from Bill's post there is no
> trouble getting it going on FC2-test3.  Thanks for all
> the help on a great product.  Cheers
> 
> ~Simon
> 
>  --- Linuxant support <support at linuxant.com> wrote: >
> Hi,
> > 
> > fax support as well as voice support are disabled in
> > the FREE mode. It is
> > also possible that the problem is in the modulation
> > code as the different
> > speed uses different modulation code.
> > 
> > You could try with an older versions of the Linux
> > kernel to see if there is
> > a difference.
> > 
> > If you require more assistance, please send us the
> > output of 'dumpdiag'
> > please? Type the following in a
> > root shell:
> > 
> > # hsfconfig --dumpdiag
> > 
> > Just send us the generated file located in /tmp
> > ('hsfdiag.txt').
> > It'll help us solve the problem.
> > 
> > Thanks,
> > 
> > 
> > Jonathan
> > Technical specialist / Linuxant
> > www.linuxant.com
> > support at linuxant.com
> > 
> > 
> > ----- Original Message -----
> > From: linuxmail2 at yahoo.com.au
> > To: hsflinux at lists.linuxant.com
> > Sent: Friday, May 07, 2004 9:24 AM
> > Subject: [hsflinux] Lockup on kernel 2.6.5
> > 
> > Hi Marcus
> > 
> > I can confirm this hang on connect too - but only
> > when
> > licensed and running at 56kbps.  Interestingly, I
> > accidentally hit connect before I licensed the
> > driver,
> > AND IT WORKED FINE in FREE mode at 14Kbps (I'm
> > sending
> > this email with it).  What else is disabled in Free
> > mode apart from the speed limitation?  Cheers
> > 
> > ~Simon
> > 
> > |  I'm using the latest HSF driver on Fedora Core 2
> > |  test2, kernel 2.6.5 (custom). It locks up the
> > system
> > |  every time I try to connect, during negotiation
> > with
> > |  the other end. Can anyone confirm the problem or
> > |  report success on this kernel version?
> > |  
> > |  Marcus
> > 
> > Find local movie times and trailers on Yahoo!
> > Movies.
> > http://au.movies.yahoo.com
> > _______________________________________________
> > hsflinux mailing list
> > hsflinux at lists.linuxant.com
> > https://www.linuxant.com/mailman/listinfo/hsflinux
> 
> 
> 
> =====
> /*--------------------------------------------*/
> Fedora Core 1 - kernel 2.6.5-rc3 (athlon)
> #312275  http://counter.li.org
> 
> Find local movie times and trailers on Yahoo! Movies.
> http://au.movies.yahoo.com
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux


More information about the hsflinux mailing list