[hsflinux] RING indication not being sent

[Linuxant support (Jonathan)]

Hi,

the modem driver should send the 'RING' message when it is detected.

Please make sure that you have selected the right country/region when you 
installed the modem driver. You can see what country is currently active with 
the 'hsfconfig --info' command in a root shell. You can change this setting 
with the 'hsfconfig' command in a root shell.

You should also try to use the modem to connect to another machine for a data 
connection or a IP connection to test the modem driver.

If you require more assistance, please send at support at linuxant.com the output 
of 'dumpdiag'. Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


On Wednesday 26 May 2004 14:09, Barry Lay wrote:
> I have a USR5660a modem which I wish to use for fax (both ways).  I
> downloaded the latest HSF driver:
>
> hsfmodem-6.03.00lnxt04051300full-1.i386.rpm
>
> and installed it on a RedHat ES 2.1 system.  Using minicom I can see
> that when I call the system from another fax machine the modem does not
> respond with the "RING" indication, which is causing problems with the
> fax software I am using (hylafax).  As far as I can tell from the
> chipset documentation this is not the correct behaviour.
>
> Is this a limitation in the driver, or a problem with the card?
>
> Thanks,
> Barry
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux