[hsflinux] problems with cpufreq

[Linuxant support (Jonathan)]

Hi,

we are aware of this problem with the HSF driver and we will contact you 
back when a fix will be available.

In the meantime, before you change the frequency of your CPU, please 
disconnect and run the 'hsfstop' command in a root shell. Then, change 
the frequency of your CPU and establish the connection again.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



schmidt_sebastian at gmx.de wrote:
> Hi,
> 
> I've some problems with the hsf driver when using it together with the
> cpufreq program. 
> I'm using Suse 9.3 (for Suse 9.1 and 8.0 the issue was the same) on a Dell
> Inspiron 8200. If the cpu speed is switched (depending on the load of the
> machine) during the connecting procedure or if after the cpu speed has been
> switched a renegotiation of the speed is done (to my knowledge, I tried to
> track it down once), I get messages like 
> kernel: Conexant: RX FIFO OVERRUN (Bus Latency) - FIFOE<3>
> kernel: Conexant: TX FIFO UNDERRUN (Bus Latency) - FIFOE<3>
> and the connection breaks down.
> 
> To be able to use the modem I had to switch off cpufreqd. It would be nice,
> if this bug would be fixed.
> 
> Regards, 
>   Sebastian
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux