[hsflinux] Modem installation

[Linuxant support (Jonathan)]

Hi,

the problem is that your modem with PCI ID 2000:2800 is not known to be 
based on a Conexant HSF chipset. The HSF modem driver we provide only 
supports modems based on a Conexant HSF chipset.

We can see this in the output of the 'lspci -v' command:

---
02:03.0 Modem: Smart Link Ltd.: Unknown device 2800 (rev 02) (prog-if 00 
[Generic])
	Subsystem: Smart Link Ltd.: Unknown device 2800
	Flags: medium devsel, IRQ 169
	Memory at fc000000 (32-bit, prefetchable) [size=16M]
	Capabilities: [80] Power Management version 2
---

Since the PCI database on your machine knows this device as a Smart Link 
device, it is quite possible this this modem will be supported by the 
Smart Link Linux modem driver that you can download at:

http://www.smlink.com/content.aspx?id=135

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



thoyyib at bluead.biz wrote:
> Sir,
> 
> I am Using 
> Fedora Core 4 linux with kernel 2.6.11-1.1369_FC4smp and gcc version
> 4.0.0(Architecture : i686)
> Please help me to install my conexant  soft modem( NSFI, Cx11252-11).
> 
> I tried it several times. modprobe.conf, hsfdiag.txt are attached
> herewith.
> and other tresults from terminal are given below:
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux