[hsflinux] kppp: "The modem is busy"

Linuxant support (Jonathan) support at linuxant.com
Wed Jun 27 15:18:49 EDT 2007


we can see the following PCI device in your machine:

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller (rev 02)

so it's quite possible that the modem is connected to that HDA bus. 
However, it seems that your kernel was not compiled HDA bus support (you 
do not seem to have the snd_hda_intel module loaded and the HSF driver 
didn't compile HDA related modules).

Please re-compile your kernel and make sure that the SND_HDA_INTEL 
option is set to 'm' (do not try with 'y', it will not work) in your 
kernel configuration file.


Technical specialist / Linuxant
support at linuxant.com

abe wrote:
> Hello,
> I can not access my modem anymore. The dial-up tool kppp says "The modem is 
> busy" and wvdialconf: 
> ---------- begin ---------------------------
>  Scanning your serial ports for a modem.
>  Modem Port Scan<*1>: Scanning ttySHSF0 first, /dev/modem is a link to it.
>  Modem Port Scan<*1>: SHSF0 S0
>  ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>  ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>  ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>  Modem Port Scan<*1>: S2   S3   SHSF1 SHSF2 SHSF3 SHSF4
>  Modem Port Scan<*1>: SHSF5 SHSF6 SHSF7
> ----------- end ----------------------------
> I am running Gentoo Linux. You find more information about my system in the 
> attached hsfdiag.txt file.
> Please help me,
> abe
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux

More information about the hsflinux mailing list