[hsflinux] dial-up interrupting after installation
of "hsfmodem_7.60.00.09full_i386.deb" for Conexant HD Audio modem
DBader
dbader529 at web.de
Tue Aug 7 00:28:11 EDT 2007
Hi,
thank you for your information. Actually, I did indeed reboot my
computer and also heard the dialing tone until it interrupted.
The country-code seems well to be Switzerland as it should. Below you
will find the hsfdiag.txt, thank you for your any hint or point of view!
hsfdiag.txt********************************************************
> + hsfstop
>
> + modprobe -v /dev/ttySHSF
> install /sbin/modprobe hsfpcibasic2; /sbin/modprobe hsfmc97ich; /sbin/modprobe hsfmc97via; /sbin/modprobe hsfmc97ali; /sbin/modprobe hsfmc97ati; /sbin/modprobe hsfmc97sis; [ -e /lib/modules/`uname -r`/extra/hsfusbcd2.ko ] && /sbin/modprobe hsfusbcd2; /sbin/modprobe snd_hda_intel; /bin/true
> insmod /lib/modules/2.6.20-16-generic/extra/hsfsoar.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfosspec.ko dcpmajor=242 diagmajor=243
> insmod /lib/modules/2.6.20-16-generic/extra/hsfengine.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfserial.ko serialmajor=240
> insmod /lib/modules/2.6.20-16-generic/extra/hsfpcibasic2.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfmc97ich.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfmc97via.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfmc97ali.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfmc97ati.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfmc97sis.ko
> insmod /lib/modules/2.6.20-16-generic/extra/hsfusbcd2.ko
> insmod /lib/modules/2.6.20-16-generic/extra/snd-hda-codec.ko
> insmod /lib/modules/2.6.20-16-generic/extra/snd-hda-intel.ko
>
> + lsmod
> Module Size Used by
> hsfhda 109992 1
> snd_hda_intel 22680 1
> snd_hda_codec 238988 2 hsfhda,snd_hda_intel
> hsfusbcd2 66472 0
> hsfmc97sis 68760 0
> hsfmc97ati 67480 0
> hsfmc97ali 74016 0
> hsfmc97via 69920 0
> hsfmc97ich 72088 0
> hsfpcibasic2 68120 0
> hsfserial 24580 8 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
> hsfengine 1307148 9 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial
> hsfosspec 105448 13 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial,hsfengine
> hsfsoar 87304 7 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
> ppp_generic 29076 0
> slhc 7680 1 ppp_generic
> binfmt_misc 12680 1
> rfcomm 40856 0
> l2cap 25856 5 rfcomm
> bluetooth 55908 4 rfcomm,l2cap
> i915 24448 2
> drm 81044 3 i915
> ppdev 10116 0
> acpi_cpufreq 10056 1
> cpufreq_ondemand 9228 1
> cpufreq_userspace 5408 0
> cpufreq_powersave 2688 0
> cpufreq_conservative 8200 0
> cpufreq_stats 7360 0
> freq_table 5792 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
> dev_acpi 12292 0
> sony_acpi 6284 0
> tc1100_wmi 8068 0
> pcc_acpi 13184 0
> dock 10268 0
> sbs 15652 0
> i2c_ec 6016 1 sbs
> i2c_core 22656 1 i2c_ec
> container 5248 0
> video 16388 0
> battery 10756 0
> asus_acpi 17308 0
> backlight 7040 1 asus_acpi
> button 8720 0
> ac 6020 0
> ext2 66824 1
> cbc 5504 1
> ipv6 268960 12
> sbp2 23812 0
> parport_pc 36388 0
> lp 12452 0
> parport 36936 3 ppdev,parport_pc,lp
> fuse 46612 5
> joydev 10816 0
> snd_pcm_oss 44544 0
> snd_mixer_oss 17408 1 snd_pcm_oss
> snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_seq_dummy 4740 0
> snd_seq_oss 32896 0
> snd_seq_midi 9600 0
> snd_rawmidi 25472 1 snd_seq_midi
> snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
> snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_timer 23684 2 snd_pcm,snd_seq
> snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> sdhci 18700 0
> mmc_core 26756 1 sdhci
> bcm43xx 126824 0
> ieee80211softmac 31360 1 bcm43xx
> ieee80211 34760 2 bcm43xx,ieee80211softmac
> ieee80211_crypt 7040 1 ieee80211
> iTCO_wdt 11812 0
> iTCO_vendor_support 4868 1 iTCO_wdt
> snd 54020 12 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> soundcore 8672 1 snd
> pcspkr 4224 0
> af_packet 23816 4
> serio_raw 7940 0
> psmouse 38920 0
> snd_page_alloc 10888 2 snd_hda_intel,snd_pcm
> intel_agp 25244 1
> agpgart 35400 3 drm,intel_agp
> shpchp 34324 0
> pci_hotplug 32576 1 shpchp
> tsdev 8768 0
> evdev 11008 4
> ext3 133128 2
> jbd 59816 1 ext3
> mbcache 9604 2 ext2,ext3
> lrw 5376 4
> blkcipher 6784 2 cbc,lrw
> gf128mul 9600 1 lrw
> sg 36252 0
> sr_mod 17060 0
> cdrom 37664 1 sr_mod
> sd_mod 23428 7
> generic 5124 0 [permanent]
> usbhid 26592 0
> hid 27392 1 usbhid
> ata_piix 15492 6
> ohci1394 36528 0
> ieee1394 299448 2 sbp2,ohci1394
> b44 28044 0
> mii 6528 1 b44
> ehci_hcd 34188 0
> ata_generic 9092 0
> libata 125720 2 ata_piix,ata_generic
> scsi_mod 142348 5 sbp2,sg,sr_mod,sd_mod,libata
> uhci_hcd 25360 0
> usbcore 134280 6 hsfusbcd2,hsfosspec,usbhid,ehci_hcd,uhci_hcd
> thermal 14856 0
> processor 31048 2 acpi_cpufreq,thermal
> fan 5636 0
> fbcon 42656 0
> tileblit 3584 1 fbcon
> font 9216 1 fbcon
> bitblit 6912 1 fbcon
> softcursor 3200 1 bitblit
> vesafb 9220 0
> capability 5896 0
> commoncap 8192 1 capability
> sha256 12032 0
> dm_crypt 14856 1
> dm_mod 59084 9 dm_crypt
> aes_i586 34304 5
>
> + date
> Fri Aug 3 20:51:55 CEST 2007
>
> + /usr/sbin/hsfconfig --info
> Conexant HSF softmodem driver, version 7.60.00.09full
>
> If you need license keys, assistance or more information, please go to:
> http://www.linuxant.com/
>
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
>
> Note: kernel module snd-via82xx-modem overridden by hsfmc97via
> Note: kernel module snd-intel8x0m overridden by hsfmc97ich hsfmc97sis
> Note: kernel module snd-atiixp-modem overridden by hsfmc97ati
>
> Current parameters: ("hsfconfig --info")
>
> Config for modem unit 0: /dev/ttySHSF0
> Device instance: 0-HDA-14f12bfa:14f100c3-1
> HW revision : SSD=31 LSD=0x11
> HW profile name: hsfhda
> Registration ID: D3A3-0B81-C12B
> License owner : unknown
> License key : FREE
> License status : FREE (max 14.4kbps data only)
> Current region : SWITZERLAND (T.35 code: 00A6)
>
> The /dev/modem alias (symlink) points to ttySHSF0
>
> To enable full 56K modem and FAX functionality, enter your license information
> with "hsfconfig --license".
>
> License owner and key data must EXACTLY match the information respectively
> provided to and by Linuxant. Otherwise, license status will remain "FREE"!
>
> + identify_system
> linux-i686(i686)-2.6.20-16-generic-SMP Ubuntu-7.04
>
> + uname -a
> Linux XX1 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux
>
> + gcc -v
> Using built-in specs.
> Target: i486-linux-gnu
> Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu
> Thread model: posix
> gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)
>
> + cat -v /proc/version
> Linux version 2.6.20-16-generic (root at terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007
>
> + cat -v /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 14
> model name : Genuine Intel(R) CPU T2080 @ 1.73GHz
> stepping : 12
> cpu MHz : 1733.000
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor est tm2 xtpr
> bogomips : 3461.64
> clflush size : 64
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 14
> model name : Genuine Intel(R) CPU T2080 @ 1.73GHz
> stepping : 12
> cpu MHz : 1733.000
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 1
> cpu cores : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 10
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor est tm2 xtpr
> bogomips : 3458.12
> clflush size : 64
>
>
> + cat -v /etc/debian_version
> 4.0
>
> + cat -v /etc/lsb-release
> DISTRIB_ID=Ubuntu
> DISTRIB_RELEASE=7.04
> DISTRIB_CODENAME=feisty
> DISTRIB_DESCRIPTION="Ubuntu 7.04"
>
> + dmesg
> [ 0.000000] Linux version 2.6.20-16-generic (root at terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] sanitize start
> [ 0.000000] sanitize end
> [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
> [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007f5d3400 end: 000000007f6d3400 type: 1
> [ 0.000000] copy_e820_map() type is E820_RAM
> [ 0.000000] copy_e820_map() start: 000000007f6d3400 size: 000000000092cc00 end: 0000000080000000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004007000 end: 00000000f4007000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000f4008000 size: 0000000000004000 end: 00000000f400c000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
> [ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f6d3400 (usable)
> [ 0.000000] BIOS-e820: 000000007f6d3400 - 0000000080000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] 1142MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] Entering add_active_range(0, 0, 521939) 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 521939
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 521939
> [ 0.000000] On node 0 totalpages: 521939
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 2285 pages used for memmap
> [ 0.000000] HighMem zone: 290278 pages, LIFO batch:31
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc1d0
> [ 0.000000] ACPI: RSDT (v001 DELL M07 0x27d7060d ASL 0x00000061) @ 0x7f6d39cd
> [ 0.000000] ACPI: FADT (v001 DELL M07 0x27d7060d ASL 0x00000061) @ 0x7f6d4800
> [ 0.000000] ACPI: HPET (v001 DELL M07 0x00000001 ASL 0x00000061) @ 0x7f6d4f00
> [ 0.000000] ACPI: MADT (v001 DELL M07 0x27d7060d ASL 0x00000047) @ 0x7f6d5000
> [ 0.000000] ACPI: MCFG (v016 DELL M07 0x27d7060d ASL 0x00000061) @ 0x7f6d4fc0
> [ 0.000000] ACPI: SLIC (v001 DELL M07 0x27d7060d ASL 0x00000061) @ 0x7f6d509c
> [ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d7060d ASL 0x00000061) @ 0x7f6d4bc0
> [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7f6d3a0d
> [ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
> [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] Processor #0 6:14 APIC version 20
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] Processor #1 6:14 APIC version 20
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
> [ 0.000000] Detected 1729.221 MHz processor.
> [ 5.826163] Built 1 zonelists. Total pages: 517862
> [ 5.826167] Kernel command line: root=/dev/mapper/root ro quiet
> [ 5.826310] mapped APIC to ffffd000 (fee00000)
> [ 5.826312] mapped IOAPIC to ffffc000 (fec00000)
> [ 5.826315] Enabling fast FPU save and restore... done.
> [ 5.826318] Enabling unmasked SIMD FPU exception support... done.
> [ 5.826325] Initializing CPU#0
> [ 5.826391] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 5.828072] Console: colour VGA+ 80x25
> [ 5.828380] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 5.828778] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 5.920292] Memory: 2058584k/2087756k available (1992k kernel code, 27912k reserved, 900k data, 328k init, 1170252k highmem)
> [ 5.920302] virtual kernel memory layout:
> [ 5.920303] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
> [ 5.920304] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 5.920305] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 5.920307] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 5.920308] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
> [ 5.920309] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
> [ 5.920310] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
> [ 5.920315] Checking if this processor honours the WP bit even in supervisor mode... Ok.
> [ 5.920475] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 5.920480] hpet0: 3 64-bit timers, 14318180 Hz
> [ 5.921486] Using HPET for base-timer
> [ 6.000444] Calibrating delay using timer specific routine.. 3461.64 BogoMIPS (lpj=6923295)
> [ 6.000488] Security Framework v1.0.0 initialized
> [ 6.000496] SELinux: Disabled at boot.
> [ 6.000512] Mount-cache hash table entries: 512
> [ 6.000657] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
> [ 6.000666] monitor/mwait feature present.
> [ 6.000668] using mwait in idle threads.
> [ 6.000672] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 6.000676] CPU: L2 cache: 1024K
> [ 6.000679] CPU: Physical Processor ID: 0
> [ 6.000681] CPU: Processor Core ID: 0
> [ 6.000683] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
> [ 6.000693] Compat vDSO mapped to ffffe000.
> [ 6.000697] Remapping vsyscall page to ffffe000
> [ 6.000710] Checking 'hlt' instruction... OK.
> [ 6.016554] SMP alternatives: switching to UP code
> [ 6.016948] Early unpacking initramfs... done
> [ 6.357500] ACPI: Core revision 20060707
> [ 6.373881] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
> [ 6.376588] CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
> [ 6.376609] SMP alternatives: switching to SMP code
> [ 6.376740] Booting processor 1/1 eip 3000
> [ 8.372841] Initializing CPU#1
> [ 8.452092] Calibrating delay using timer specific routine.. 3458.12 BogoMIPS (lpj=6916255)
> [ 8.452100] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
> [ 8.452105] monitor/mwait feature present.
> [ 8.452108] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 8.452110] CPU: L2 cache: 1024K
> [ 8.452113] CPU: Physical Processor ID: 0
> [ 8.452114] CPU: Processor Core ID: 1
> [ 8.452116] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
> [ 6.468648] CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
> [ 6.468671] Total of 2 processors activated (6919.77 BogoMIPS).
> [ 6.468869] ENABLING IO-APIC IRQs
> [ 6.469072] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 6.616187] checking TSC synchronization across 2 CPUs:
> [ 0.000001] CPU#0 had -992340 usecs TSC skew, fixed it up.
> [ 0.000004] CPU#1 had 992340 usecs TSC skew, fixed it up.
> [ 0.003998] Brought up 2 CPUs
> [ 0.123736] migration_cost=62
> [ 0.124040] Booting paravirtualized kernel on bare hardware
> [ 0.124130] Time: 20:43:26 Date: 07/03/107
> [ 0.124160] NET: Registered protocol family 16
> [ 0.124248] EISA bus registered
> [ 0.124252] ACPI: bus type pci registered
> [ 0.152764] PCI: PCI BIOS revision 2.10 entry at 0xfb336, last bus=13
> [ 0.152766] PCI: Using configuration type 1
> [ 0.152768] Setting up standard PCI resources
> [ 0.180105] ACPI: Interpreter enabled
> [ 0.180108] ACPI: Using IOAPIC for interrupt routing
> [ 0.181042] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.181050] PCI: Probing PCI hardware (bus 00)
> [ 0.181246] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> [ 0.194853] Boot video device is 0000:00:02.0
> [ 0.195478] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> [ 0.195482] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
> [ 0.196592] PCI: Transparent bridge - 0000:00:1e.0
> [ 0.196653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.218384] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
> [ 0.218652] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
> [ 0.218918] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
> [ 0.219183] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
> [ 0.219450] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
> [ 0.219715] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
> [ 0.219988] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
> [ 0.220254] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
> [ 0.221737] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
> [ 0.222008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.222424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> [ 0.222872] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.222882] pnp: PnP ACPI init
> [ 0.256684] pnp: PnP ACPI: found 12 devices
> [ 0.256688] PnPBIOS: Disabled by ACPI PNP
> [ 0.256739] PCI: Using ACPI for IRQ routing
> [ 0.256743] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> [ 0.302728] NET: Registered protocol family 8
> [ 0.302730] NET: Registered protocol family 20
> [ 0.321722] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.321726] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
> [ 0.321729] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
> [ 0.321734] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
> [ 0.321737] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
> [ 0.321740] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
> [ 0.321743] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
> [ 0.321745] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
> [ 0.321748] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
> [ 0.321756] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
> [ 0.321759] pnp: 00:08: ioport range 0x910-0x91f has been reserved
> [ 0.321761] pnp: 00:08: ioport range 0x920-0x92f has been reserved
> [ 0.321764] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
> [ 0.321767] pnp: 00:08: ioport range 0x930-0x97f has been reserved
> [ 0.322062] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
> [ 0.322066] PCI: Bridge: 0000:00:1c.0
> [ 0.322068] IO window: disabled.
> [ 0.322074] MEM window: efd00000-efdfffff
> [ 0.322079] PREFETCH window: disabled.
> [ 0.322085] PCI: Bridge: 0000:00:1c.3
> [ 0.322088] IO window: d000-dfff
> [ 0.322094] MEM window: efa00000-efcfffff
> [ 0.322099] PREFETCH window: e0000000-e01fffff
> [ 0.322106] PCI: Bridge: 0000:00:1e.0
> [ 0.322107] IO window: disabled.
> [ 0.322113] MEM window: ef900000-ef9fffff
> [ 0.322118] PREFETCH window: disabled.
> [ 0.322151] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 0.322158] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 0.322183] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
> [ 0.322189] PCI: Setting latency timer of device 0000:00:1c.3 to 64
> [ 0.322203] PCI: Setting latency timer of device 0000:00:1e.0 to 64
> [ 0.322234] NET: Registered protocol family 2
> [ 0.367900] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.368026] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.368764] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.369156] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.369159] TCP reno registered
> [ 0.383982] checking if image is initramfs... it is
> [ 1.049747] Freeing initrd memory: 7038k freed
> [ 1.049932] Simple Boot Flag at 0x79 set to 0x1
> [ 1.050405] audit: initializing netlink socket (disabled)
> [ 1.050423] audit(1186173807.828:1): initialized
> [ 1.050522] highmem bounce pool size: 64 pages
> [ 1.050620] VFS: Disk quotas dquot_6.5.1
> [ 1.050640] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.050689] io scheduler noop registered
> [ 1.050692] io scheduler anticipatory registered
> [ 1.050694] io scheduler deadline registered
> [ 1.050707] io scheduler cfq registered (default)
> [ 1.050970] PCI: Setting latency timer of device 0000:00:1c.0 to 64
> [ 1.051029] assign_interrupt_mode Found MSI capability
> [ 1.051032] Allocate Port Service[0000:00:1c.0:pcie00]
> [ 1.051065] Allocate Port Service[0000:00:1c.0:pcie02]
> [ 1.051196] PCI: Setting latency timer of device 0000:00:1c.3 to 64
> [ 1.051254] assign_interrupt_mode Found MSI capability
> [ 1.051256] Allocate Port Service[0000:00:1c.3:pcie00]
> [ 1.051288] Allocate Port Service[0000:00:1c.3:pcie02]
> [ 1.051468] isapnp: Scanning for PnP cards...
> [ 1.405344] isapnp: No Plug & Play device found
> [ 1.429928] Real Time Clock Driver v1.12ac
> [ 1.429998] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 1.430676] mice: PS/2 mouse device common for all mice
> [ 1.431240] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> [ 1.431487] input: Macintosh mouse button emulation as /class/input/input0
> [ 1.431522] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> [ 1.431526] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 1.431772] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> [ 1.435238] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.435243] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.435377] EISA: Probing bus 0 at eisa.0
> [ 1.435393] Cannot allocate resource for EISA slot 1
> [ 1.435425] EISA: Detected 0 cards.
> [ 1.465549] TCP cubic registered
> [ 1.465561] NET: Registered protocol family 1
> [ 1.465587] Starting balanced_irq
> [ 1.465594] Using IPI No-Shortcut mode
> [ 1.465686] input: AT Translated Set 2 keyboard as /class/input/input1
> [ 1.465749] ACPI: (supports S0 S3 S4 S5)
> [ 1.465797] Magic number: 3:44:750
> [ 1.465801] hash matches device ttyS1
> [ 1.466094] Freeing unused kernel memory: 328k freed
> [ 1.467388] Time: tsc clocksource has been installed.
> [ 1.661026] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
> [ 1.672357] Capability LSM initialized
> [ 1.709179] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
> [ 1.709367] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
> [ 1.709584] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.709588] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 1.710025] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
> [ 1.710195] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
> [ 1.710453] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.710458] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 2.312000] ACPI: Thermal Zone [THM] (55 C)
> [ 2.316000] Time: hpet clocksource has been installed.
> [ 2.664000] usbcore: registered new interface driver usbfs
> [ 2.664000] usbcore: registered new interface driver hub
> [ 2.664000] usbcore: registered new device driver usb
> [ 2.664000] USB Universal Host Controller Interface driver v3.0
> [ 2.664000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
> [ 2.664000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
> [ 2.664000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 2.664000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> [ 2.664000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
> [ 2.664000] usb usb1: configuration #1 chosen from 1 choice
> [ 2.664000] hub 1-0:1.0: USB hub found
> [ 2.664000] hub 1-0:1.0: 2 ports detected
> [ 2.696000] SCSI subsystem initialized
> [ 2.700000] libata version 2.20 loaded.
> [ 2.768000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
> [ 2.768000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
> [ 2.768000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 2.768000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> [ 2.768000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
> [ 2.768000] usb usb2: configuration #1 chosen from 1 choice
> [ 2.768000] hub 2-0:1.0: USB hub found
> [ 2.768000] hub 2-0:1.0: 2 ports detected
> [ 2.808000] ieee1394: Initialized config rom entry `ip1394'
> [ 2.872000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20
> [ 2.872000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
> [ 2.872000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 2.872000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> [ 2.872000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000bf40
> [ 2.872000] usb usb3: configuration #1 chosen from 1 choice
> [ 2.872000] hub 3-0:1.0: USB hub found
> [ 2.872000] hub 3-0:1.0: 2 ports detected
> [ 2.976000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
> [ 2.976000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
> [ 2.976000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 2.976000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> [ 2.976000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000bf20
> [ 2.976000] usb usb4: configuration #1 chosen from 1 choice
> [ 2.976000] hub 4-0:1.0: USB hub found
> [ 2.976000] hub 4-0:1.0: 2 ports detected
> [ 3.008000] usb 1-1: new low speed USB device using uhci_hcd and address 2
> [ 3.080000] ata_piix 0000:00:1f.2: version 2.10ac1
> [ 3.080000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> [ 3.080000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 22
> [ 3.080000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
> [ 3.080000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
> [ 3.080000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
> [ 3.080000] scsi0 : ata_piix
> [ 3.180000] usb 1-1: configuration #1 chosen from 1 choice
> [ 3.196000] usbcore: registered new interface driver hiddev
> [ 3.208000] input: Kensington Pilot Mini Retractable as /class/input/input2
> [ 3.208000] input: USB HID v1.10 Mouse [Kensington Pilot Mini Retractable] on usb-0000:00:1d.0-1
> [ 3.208000] usbcore: registered new interface driver usbhid
> [ 3.208000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> [ 3.244000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
> [ 3.244000] ata1.00: ATA-8: FUJITSU MHW2160BH, 0085001C, max UDMA/100
> [ 3.244000] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
> [ 3.252000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
> [ 3.252000] ata1.00: configured for UDMA/100
> [ 3.252000] scsi1 : ata_piix
> [ 3.596000] ata2.00: ATAPI, max UDMA/33
> [ 3.784000] ata2.00: configured for UDMA/33
> [ 3.784000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 0085 PQ: 0 ANSI: 5
> [ 3.784000] scsi 1:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
> [ 3.788000] b44.c:v1.01 (Jun 16, 2006)
> [ 3.788000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22
> [ 3.788000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:19:b9:89:2b:6a
> [ 3.788000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
> [ 3.844000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
> [ 3.848000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
> [ 3.848000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
> [ 3.848000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 3.848000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> [ 3.848000] ehci_hcd 0000:00:1d.7: debug port 1
> [ 3.848000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> [ 3.848000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80000
> [ 3.852000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 3.852000] usb usb5: configuration #1 chosen from 1 choice
> [ 3.852000] hub 5-0:1.0: USB hub found
> [ 3.852000] hub 5-0:1.0: 8 ports detected
> [ 3.860000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> [ 3.860000] sda: Write Protect is off
> [ 3.860000] sda: Mode Sense: 00 3a 00 00
> [ 3.860000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.860000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> [ 3.860000] sda: Write Protect is off
> [ 3.860000] sda: Mode Sense: 00 3a 00 00
> [ 3.860000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.860000] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
> [ 3.908000] sd 0:0:0:0: Attached scsi disk sda
> [ 3.912000] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 3.912000] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 3.924000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> [ 3.924000] Uniform CD-ROM driver Revision: 3.20
> [ 3.924000] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 4.140000] usb 1-1: USB disconnect, address 2
> [ 4.380000] usb 1-1: new low speed USB device using uhci_hcd and address 3
> [ 4.552000] usb 1-1: configuration #1 chosen from 1 choice
> [ 4.568000] input: Kensington Pilot Mini Retractable as /class/input/input3
> [ 4.568000] input: USB HID v1.10 Mouse [Kensington Pilot Mini Retractable] on usb-0000:00:1d.0-1
> [ 5.120000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[344fc00012310470]
> [ 8.428000] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-2390
> [ 15.944000] device-mapper: ioctl: unable to remove open device temporary-cryptsetup-2434
> [ 16.148000] kjournald starting. Commit interval 5 seconds
> [ 16.148000] EXT3-fs: mounted filesystem with ordered data mode.
> [ 26.824000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 26.884000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 26.896000] Linux agpgart interface v0.102 (c) Dave Jones
> [ 26.912000] agpgart: Detected an Intel 945GM Chipset.
> [ 26.912000] agpgart: Detected 7932K stolen memory.
> [ 26.932000] agpgart: AGP aperture is 256M @ 0xd0000000
> [ 27.000000] intel_rng: FWH not detected
> [ 27.228000] NET: Registered protocol family 17
> [ 27.240000] input: PC Speaker as /class/input/input4
> [ 27.412000] iTCO_vendor_support: vendor-support=0
> [ 27.460000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
> [ 27.464000] ieee80211_crypt: registered algorithm 'NULL'
> [ 27.468000] ieee80211: 802.11 data/management/control stack, git-1.1.13
> [ 27.468000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
> [ 27.520000] bcm43xx driver
> [ 27.524000] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 27.524000] PCI: Setting latency timer of device 0000:0b:00.0 to 64
> [ 27.540000] sdhci: Secure Digital Host Controller Interface driver
> [ 27.540000] sdhci: Copyright(c) Pierre Ossman
> [ 27.540000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
> [ 27.540000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
> [ 27.540000] mmc0: SDHCI at 0xef9fd400 irq 23 DMA
> [ 27.764000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
> [ 27.800000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
> [ 27.804000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
> [ 27.804000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 28.116000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
> [ 28.116000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 28.508000] hsfengine: module license 'see LICENSE file distributed with driver' taints kernel.
> [ 28.552000] hsfhda: no version for "cnxthsf_OsHdaCodecClearEventCallback" found: kernel tainted.
> [ 28.768000] b44: eth0: Link is up at 100 Mbps, full duplex.
> [ 28.768000] b44: eth0: Flow control is off for TX and off for RX.
> [ 28.936000] cnxthsf_NVM_Open: cannot create instance 0-HDA-14f12bfa:14f100c3-1: err=256 will retry later..
> [ 29.000000] cnxthsf_NVM_WriteFlushList: cannot create instance 0-HDA-14f12bfa:14f100c3-1: err=256 failed again!
> [ 29.044000] cnxthsf_NVM_WriteFlushList: cannot create instance 0-HDA-14f12bfa:14f100c3-1: err=256 failed again!
> [ 29.200000] cnxthsf_NVM_WriteFlushList: cannot create instance 0-HDA-14f12bfa:14f100c3-1: err=256 failed again!
> [ 29.244000] cnxthsf_NVM_WriteFlushList: cannot create instance 0-HDA-14f12bfa:14f100c3-1: err=256 failed again!
> [ 30.316000] ttySHSF0 at MMIO 0x0 (irq = 1) is a Conexant HSF softmodem (HDA-14f12bfa:14f100c3-1)
> [ 30.480000] fuse init (API version 7.8)
> [ 30.556000] lp: driver loaded but no devices found
> [ 30.900000] EXT3 FS on dm-2, internal journal
> [ 31.104000] NET: Registered protocol family 10
> [ 31.104000] lo: Disabled Privacy Extensions
> [ 31.108000] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 35.216000] kjournald starting. Commit interval 5 seconds
> [ 35.216000] EXT3 FS on dm-3, internal journal
> [ 35.216000] EXT3-fs: mounted filesystem with ordered data mode.
> [ 35.528000] Adding 995988k swap on /dev/mapper/swap. Priority:-1 extents:1 across:995988k
> [ 40.268000] ACPI: AC Adapter [AC] (on-line)
> [ 40.288000] input: Lid Switch as /class/input/input6
> [ 40.288000] ACPI: Lid Switch [LID]
> [ 40.288000] input: Power Button (CM) as /class/input/input7
> [ 40.288000] ACPI: Power Button (CM) [PBTN]
> [ 40.296000] input: Sleep Button (CM) as /class/input/input8
> [ 40.296000] ACPI: Sleep Button (CM) [SBTN]
> [ 40.416000] ACPI: Battery Slot [BAT0] (battery present)
> [ 40.444000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 40.448000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
> [ 40.448000] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
> [ 40.488000] ibm_acpi: ec object not found
> [ 40.576000] No dock devices found.
> [ 40.596000] Using specific hotkey driver
> [ 40.676000] pcc_acpi: loading...
> [ 41.536000] eth0: no IPv6 routers present
> [ 50.128000] ppdev: user-space parallel port driver
> [ 50.824000] [drm] Initialized drm 1.1.0 20060810
> [ 50.828000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
> [ 50.828000] [drm] Initialized i915 1.6.0 20060119 on minor 0
> [ 51.196000] apm: BIOS not found.
> [ 52.948000] cnxthsf_OsEventWaitTime(f7963b00/HDA CodecUnsolicitedmessage, 40): returning OSEVENT_WAIT_TIMEOUT
> [ 53.044000] Bluetooth: Core ver 2.11
> [ 53.044000] NET: Registered protocol family 31
> [ 53.044000] Bluetooth: HCI device and connection manager initialized
> [ 53.044000] Bluetooth: HCI socket layer initialized
> [ 53.068000] Bluetooth: L2CAP ver 2.8
> [ 53.068000] Bluetooth: L2CAP socket layer initialized
> [ 53.240000] Bluetooth: RFCOMM socket layer initialized
> [ 53.240000] Bluetooth: RFCOMM TTY layer initialized
> [ 53.240000] Bluetooth: RFCOMM ver 1.8
> [ 66.380000] eth0: no IPv6 routers present
> [ 172.616000] usb 1-1: USB disconnect, address 3
> [ 207.768000] b44: eth0: Link is down.
> [ 212.748000] cnxthsf_OsEventWaitTime(f7963b00/HDA CodecUnsolicitedmessage, 40): returning OSEVENT_WAIT_TIMEOUT
> [ 212.952000] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 213.020000] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 233.464000] cnxthsf_OsEventWaitTime(f7963b00/HDA CodecUnsolicitedmessage, 40): returning OSEVENT_WAIT_TIMEOUT
> [ 235.316000] cnxthsf_OsEventWaitTime(f7963b00/HDA CodecUnsolicitedmessage, 40): returning OSEVENT_WAIT_TIMEOUT
> [ 268.804000] PPP generic driver version 2.4.2
> [ 273.812000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [ 281.292000] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 420.276000] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 450.228000] ADDRCONF(NETDEV_UP): eth1: link is not ready
> [ 468.340000] usb 1-1: new low speed USB device using uhci_hcd and address 4
> [ 468.512000] usb 1-1: configuration #1 chosen from 1 choice
> [ 468.528000] input: Kensington Pilot Mini Retractable as /class/input/input9
> [ 468.528000] input: USB HID v1.10 Mouse [Kensington Pilot Mini Retractable] on usb-0000:00:1d.0-1
> [ 475.020000] b44: eth0: Link is up at 100 Mbps, full duplex.
> [ 475.020000] b44: eth0: Flow control is off for TX and off for RX.
> [ 475.024000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 485.148000] eth0: no IPv6 routers present
> [ 498.452000] eth0: no IPv6 routers present
> [ 507.908000] usbcore: registered new interface driver hsfusbcd2
> [ 507.940000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
> [ 507.940000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [ 509.500000] ttySHSF0 at MMIO 0x0 (irq = 1) is a Conexant HSF softmodem (HDA-14f12bfa:14f100c3-1)
>
> + cat -v /var/run/hsfdcpd0.err
>
> + cat -v /var/run/hsfdcpd0.out
>
> + lspci -n
> 00:00.0 0600: 8086:27a0 (rev 03)
> 00:02.0 0300: 8086:27a2 (rev 03)
> 00:02.1 0380: 8086:27a6 (rev 03)
> 00:1b.0 0403: 8086:27d8 (rev 01)
> 00:1c.0 0604: 8086:27d0 (rev 01)
> 00:1c.3 0604: 8086:27d6 (rev 01)
> 00:1d.0 0c03: 8086:27c8 (rev 01)
> 00:1d.1 0c03: 8086:27c9 (rev 01)
> 00:1d.2 0c03: 8086:27ca (rev 01)
> 00:1d.3 0c03: 8086:27cb (rev 01)
> 00:1d.7 0c03: 8086:27cc (rev 01)
> 00:1e.0 0604: 8086:2448 (rev e1)
> 00:1f.0 0601: 8086:27b9 (rev 01)
> 00:1f.2 0101: 8086:27c4 (rev 01)
> 00:1f.3 0c05: 8086:27da (rev 01)
> 03:00.0 0200: 14e4:170c (rev 02)
> 03:01.0 0c00: 1180:0832
> 03:01.1 0805: 1180:0822 (rev 19)
> 03:01.2 0880: 1180:0843 (rev 01)
> 03:01.3 0880: 1180:0592 (rev 0a)
> 03:01.4 0880: 1180:0852 (rev 05)
> 0b:00.0 0280: 14e4:4311 (rev 01)
>
> + lspci -v
> 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
> I/O ports at eff8 [size=8]
> Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Capabilities: [d0] Power Management version 2
>
> 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, fast devsel, latency 0
> Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: [d0] Power Management version 2
>
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> Capabilities: [70] Express Unknown type IRQ 0
>
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
> Memory behind bridge: efd00000-efdfffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Capabilities: [90] Subsystem: Dell Unknown device 01bd
> Capabilities: [a0] Power Management version 2
>
> 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: efa00000-efcfffff
> Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Capabilities: [90] Subsystem: Dell Unknown device 01bd
> Capabilities: [a0] Power Management version 2
>
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at bf80 [size=32]
>
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at bf60 [size=32]
>
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 20
> I/O ports at bf40 [size=32]
>
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 21
> I/O ports at bf20 [size=32]
>
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 18
> Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] Debug port
>
> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
> Memory behind bridge: ef900000-ef9fffff
> Capabilities: [50] Subsystem: Dell Unknown device 01bd
>
> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 80 [Master])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
> I/O ports at 01f0 [size=8]
> I/O ports at 03f4 [size=1]
> I/O ports at 0170 [size=8]
> I/O ports at 0374 [size=1]
> I/O ports at bfa0 [size=16]
> Capabilities: [70] Power Management version 2
>
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> Subsystem: Dell Unknown device 01bd
> Flags: medium devsel, IRQ 4
> I/O ports at 10c0 [size=32]
>
> 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
> Subsystem: Dell Unknown device 01af
> Flags: bus master, fast devsel, latency 64, IRQ 22
> Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
>
> 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (prog-if 10 [OHCI])
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 64, IRQ 17
> Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
>
> 03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 64, IRQ 23
> Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 03:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
> Subsystem: Dell Unknown device 01bd
> Flags: bus master, medium devsel, latency 0, IRQ 11
> Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
> Subsystem: Dell Unknown device 01bd
> Flags: medium devsel, IRQ 11
> Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
> Subsystem: Dell Unknown device 01bd
> Flags: medium devsel, IRQ 11
> Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
>
> 0b:00.0 Network controller: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card (rev 01)
> Subsystem: Dell Unknown device 0007
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Capabilities: [d0] Express Legacy Endpoint IRQ 0
>
>
> + lspci -n -vvv
> 00:00.0 0600: 8086:27a0 (rev 03)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])
> Subsystem: 1028:01bd
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at eff00000 (32-bit, non-prefetchable) [size=512K]
> Region 1: I/O ports at eff8 [size=8]
> Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 3: Memory at efec0000 (32-bit, non-prefetchable) [size=256K]
> Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:02.1 0380: 8086:27a6 (rev 03)
> Subsystem: 1028:01bd
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Region 0: Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1b.0 0403: 8086:27d8 (rev 01)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at efebc000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express Unknown type IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> Device: Latency L0s <64ns, L1 <1us
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
> Link: Latency L0s <64ns, L1 <1us
> Link: ASPM Disabled CommClk- ExtSynch-
> Link: Speed unknown, Width x0
>
> 00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: efd00000-efdfffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> Device: Latency L0s unlimited, L1 unlimited
> Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
> Link: Latency L0s <256ns, L1 <4us
> Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 2, PowerLimit 6.500000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> Slot: AttnInd Unknown, PwrInd Unknown, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [90] Subsystem: 1028:01bd
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1c.3 0604: 8086:27d6 (rev 01) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: efa00000-efcfffff
> Prefetchable memory behind bridge: 00000000e0000000-00000000e01fffff
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [40] Express Root Port (Slot+) IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> Device: Latency L0s unlimited, L1 unlimited
> Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
> Link: Latency L0s <1us, L1 <4us
> Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
> Link: Speed 2.5Gb/s, Width x0
> Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> Slot: Number 5, PowerLimit 6.500000
> Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
> Slot: AttnInd Unknown, PwrInd Unknown, Power-
> Root: Correctable- Non-Fatal- Fatal- PME-
> Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [90] Subsystem: 1028:01bd
> Capabilities: [a0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 4: I/O ports at bf80 [size=32]
>
> 00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 19
> Region 4: I/O ports at bf60 [size=32]
>
> 00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 20
> Region 4: I/O ports at bf40 [size=32]
>
> 00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 21
> Region 4: I/O ports at bf20 [size=32]
>
> 00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME+
> Capabilities: [58] Debug port
>
> 00:1e.0 0604: 8086:2448 (rev e1) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: ef900000-ef9fffff
> Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
> Capabilities: [50] Subsystem: 1028:01bd
>
> 00:1f.0 0601: 8086:27b9 (rev 01)
> Subsystem: 1028:01bd
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Capabilities: [e0] Vendor Specific Information
>
> 00:1f.2 0101: 8086:27c4 (rev 01) (prog-if 80 [Master])
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 22
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at bfa0 [size=16]
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:1f.3 0c05: 8086:27da (rev 01)
> Subsystem: 1028:01bd
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 4
> Region 4: I/O ports at 10c0 [size=32]
>
> 03:00.0 0200: 14e4:170c (rev 02)
> Subsystem: 1028:01af
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at ef9fe000 (32-bit, non-prefetchable) [size=8K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 03:01.0 0c00: 1180:0832 (prog-if 10 [OHCI])
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (500ns min, 1000ns max)
> Interrupt: pin A routed to IRQ 17
> Region 0: Memory at ef9fd800 (32-bit, non-prefetchable) [size=2K]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME+
>
> 03:01.1 0805: 1180:0822 (rev 19) (prog-if 01)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin B routed to IRQ 23
> Region 0: Memory at ef9fd400 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 03:01.2 0880: 1180:0843 (rev 01)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at ef9fd500 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 03:01.3 0880: 1180:0592 (rev 0a)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at ef9fd600 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 03:01.4 0880: 1180:0852 (rev 05)
> Subsystem: 1028:01bd
> Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 11
> Region 0: Memory at ef9fd700 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
> 0b:00.0 0280: 14e4:4311 (rev 01)
> Subsystem: 1028:0007
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at efdfc000 (32-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=2 PME-
> Capabilities: [58] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
> Address: 00000000 Data: 0000
> Capabilities: [d0] Express Legacy Endpoint IRQ 0
> Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
> Device: Latency L0s <4us, L1 unlimited
> Device: AtnBtn- AtnInd- PwrInd-
> Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
> Link: Latency L0s <4us, L1 <64us
> Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-
> Link: Speed 2.5Gb/s, Width x1
>
>
> + lsusb
> Bus 005 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 001 Device 004: ID 047d:104a Kensington
> Bus 001 Device 001: ID 0000:0000
>
> + lsusb -v
>
> Bus 005 Device 001: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.20-16-generic ehci_hcd
> iProduct 2 EHCI Host Controller
> iSerial 1 0000:00:1d.7
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Hub Descriptor:
> bLength 11
> bDescriptorType 41
> nNbrPorts 8
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> TT think time 8 FS bits
> bPwrOn2PwrGood 10 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00 0x00
> PortPwrCtrlMask 0xff 0xff
> Hub Port Status:
> Port 1: 0000.0000
> Port 2: 0000.0100 power
> Port 3: 0000.0100 power
> Port 4: 0000.0100 power
> Port 5: 0000.0100 power
> Port 6: 0000.0100 power
> Port 7: 0000.0100 power
> Port 8: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 003 Device 001: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed hub
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.20-16-generic uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.2
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 002 Device 001: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed hub
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.20-16-generic uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.1
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 004 Device 001: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed hub
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.20-16-generic uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.3
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0100 power
> Port 2: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> Bus 001 Device 004: ID 047d:104a Kensington
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x047d Kensington
> idProduct 0x104a
> bcdDevice 1.20
> iManufacturer 0
> iProduct 2 Kensington Pilot Mini Retractable
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 34
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Devices
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 2 Mouse
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.10
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 52
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 10
> Device Status: 0x0000
> (Bus Powered)
>
> Bus 001 Device 001: ID 0000:0000
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9 Hub
> bDeviceSubClass 0 Unused
> bDeviceProtocol 0 Full speed hub
> bMaxPacketSize0 64
> idVendor 0x0000
> idProduct 0x0000
> bcdDevice 2.06
> iManufacturer 3 Linux 2.6.20-16-generic uhci_hcd
> iProduct 2 UHCI Host Controller
> iSerial 1 0000:00:1d.0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0 Full speed hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0002 1x 2 bytes
> bInterval 255
> Hub Descriptor:
> bLength 9
> bDescriptorType 41
> nNbrPorts 2
> wHubCharacteristic 0x000a
> No power switching (usb 1.0)
> Per-port overcurrent protection
> bPwrOn2PwrGood 1 * 2 milli seconds
> bHubContrCurrent 0 milli Ampere
> DeviceRemovable 0x00
> PortPwrCtrlMask 0xff
> Hub Port Status:
> Port 1: 0000.0303 lowspeed power enable connect
> Port 2: 0000.0100 power
> Device Status: 0x0003
> Self Powered
> Remote Wakeup Enabled
>
> + cat -v /proc/bus/usb/devices
>
> T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.20-16-generic ehci_hcd
> S: Product=EHCI Host Controller
> S: SerialNumber=0000:00:1d.7
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
>
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.20-16-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.3
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.20-16-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.2
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.20-16-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.1
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.20-16-generic uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:1d.0
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=047d ProdID=104a Rev= 1.20
> S: Product=Kensington Pilot Mini Retractable
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
>
> + cat -v /proc/pci
> cat: /proc/pci: No such file or directory
>
> + cat -v /proc/cmdline
> root=/dev/mapper/root ro quiet
>
> + cat -v /proc/uptime
> 511.34 467.38
>
> + cat -v /proc/devices
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 /dev/vc/0
> 4 tty
> 4 ttyS
> 5 /dev/tty
> 5 /dev/console
> 5 /dev/ptmx
> 6 lp
> 7 vcs
> 10 misc
> 13 input
> 14 sound
> 21 sg
> 29 fb
> 99 ppdev
> 108 ppp
> 116 alsa
> 128 ptm
> 136 pts
> 171 ieee1394
> 180 usb
> 189 usb_device
> 216 rfcomm
> 226 drm
> 240 ttySHSF
> 242 hsfdcp
> 243 hsfdiag
> 254 usb_endpoint
>
> Block devices:
> 1 ramdisk
> 8 sd
> 11 sr
> 65 sd
> 66 sd
> 67 sd
> 68 sd
> 69 sd
> 70 sd
> 71 sd
> 128 sd
> 129 sd
> 130 sd
> 131 sd
> 132 sd
> 133 sd
> 134 sd
> 135 sd
> 254 device-mapper
>
> + cat -v /proc/misc
> 183 hw_random
> 62 acpi
> 229 fuse
> 130 watchdog
> 175 agpgart
> 63 device-mapper
> 1 psaux
> 228 hpet
> 135 rtc
> 231 snapshot
>
> + cat -v /proc/filesystems
> nodev sysfs
> nodev rootfs
> nodev bdev
> nodev proc
> nodev cpuset
> nodev debugfs
> nodev securityfs
> nodev sockfs
> nodev pipefs
> nodev futexfs
> nodev tmpfs
> nodev inotifyfs
> nodev eventpollfs
> nodev devpts
> cramfs
> nodev ramfs
> nodev mqueue
> nodev usbfs
> ext3
> nodev fuse
> fuseblk
> nodev fusectl
> ext2
> nodev binfmt_misc
>
> + cat -v /proc/interrupts
> CPU0 CPU1
> 0: 127573 0 IO-APIC-edge timer
> 1: 1780 0 IO-APIC-edge i8042
> 8: 16 0 IO-APIC-edge rtc
> 9: 7 0 IO-APIC-fasteoi acpi
> 12: 29963 61307 IO-APIC-edge i8042
> 14: 12174 0 IO-APIC-edge libata
> 15: 3586 0 IO-APIC-edge libata
> 16: 29169 0 IO-APIC-fasteoi i915 at pci:0000:00:02.0, bcm43xx
> 17: 3 0 IO-APIC-fasteoi ohci1394
> 18: 1754 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
> 19: 49186 0 IO-APIC-fasteoi uhci_hcd:usb2, HDA Intel
> 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
> 21: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
> 22: 240 0 IO-APIC-fasteoi eth0
> 23: 0 0 IO-APIC-fasteoi sdhci:slot0
> NMI: 0 0
> LOC: 127424 127353
> ERR: 0
> MIS: 0
>
> + cat -v /proc/iomem
> 00000000-0009efff : System RAM
> 00000000-00000000 : Crash kernel
> 0009f000-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000ce800-000cffff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-7f6d33ff : System RAM
> 00100000-002f2373 : Kernel code
> 002f2374-003d36d3 : Kernel data
> 7f6d3400-7fffffff : reserved
> d0000000-dfffffff : 0000:00:02.0
> e0000000-e01fffff : PCI Bus #0c
> ef900000-ef9fffff : PCI Bus #03
> ef9fd400-ef9fd4ff : 0000:03:01.1
> ef9fd400-ef9fd4ff : sdhci:slot0
> ef9fd500-ef9fd5ff : 0000:03:01.2
> ef9fd600-ef9fd6ff : 0000:03:01.3
> ef9fd700-ef9fd7ff : 0000:03:01.4
> ef9fd800-ef9fdfff : 0000:03:01.0
> ef9fd800-ef9fdfff : ohci1394
> ef9fe000-ef9fffff : 0000:03:00.0
> ef9fe000-ef9fffff : b44
> efa00000-efcfffff : PCI Bus #0c
> efd00000-efdfffff : PCI Bus #0b
> efdfc000-efdfffff : 0000:0b:00.0
> efdfc000-efdfffff : bcm43xx
> efebc000-efebffff : 0000:00:1b.0
> efebc000-efebffff : ICH HD audio
> efec0000-efefffff : 0000:00:02.0
> eff00000-eff7ffff : 0000:00:02.0
> eff80000-efffffff : 0000:00:02.1
> f0000000-f4006fff : reserved
> f4008000-f400bfff : reserved
> fec00000-fec0ffff : reserved
> fed00000-fed003ff : HPET 0
> fed20000-fed9ffff : reserved
> fee00000-fee0ffff : reserved
> ffa80000-ffa803ff : 0000:00:1d.7
> ffa80000-ffa803ff : ehci_hcd
> ffb00000-ffffffff : reserved
>
> + cat -v /proc/ioports
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:1f.2
> 0170-0177 : libata
> 01f0-01f7 : 0000:00:1f.2
> 01f0-01f7 : libata
> 0376-0376 : 0000:00:1f.2
> 0376-0376 : libata
> 03c0-03df : vga+
> 03f6-03f6 : 0000:00:1f.2
> 03f6-03f6 : libata
> 04d0-04d1 : pnp 00:02
> 0910-091f : pnp 00:08
> 0920-092f : pnp 00:08
> 0930-097f : pnp 00:08
> 0cb0-0cbf : pnp 00:08
> 0cf8-0cff : PCI conf1
> 1000-107f : 0000:00:1f.0
> 1000-1005 : motherboard
> 1000-1003 : ACPI PM1a_EVT_BLK
> 1004-1005 : ACPI PM1a_CNT_BLK
> 1006-1007 : motherboard
> 1006-1007 : pnp 00:03
> 1008-100f : motherboard
> 1008-100b : ACPI PM_TMR
> 1010-102f : motherboard
> 1010-1015 : ACPI CPU throttle
> 1020-1020 : ACPI PM2_CNT_BLK
> 1028-102f : ACPI GPE0_BLK
> 1060-107f : motherboard
> 1060-107f : pnp 00:03
> 1060-107f : iTCO_wdt
> 1080-10bf : 0000:00:1f.0
> 1080-10bf : motherboard
> 1080-10bf : pnp 00:03
> 10c0-10df : 0000:00:1f.3
> 10c0-10df : motherboard
> 10c0-10df : pnp 00:03
> bf20-bf3f : 0000:00:1d.3
> bf20-bf3f : uhci_hcd
> bf40-bf5f : 0000:00:1d.2
> bf40-bf5f : uhci_hcd
> bf60-bf7f : 0000:00:1d.1
> bf60-bf7f : uhci_hcd
> bf80-bf9f : 0000:00:1d.0
> bf80-bf9f : uhci_hcd
> bfa0-bfaf : 0000:00:1f.2
> bfa0-bfaf : libata
> d000-dfff : PCI Bus #0c
> eff8-efff : 0000:00:02.0
> f400-f4fe : motherboard
> f400-f4fe : pnp 00:03
>
> + cat -v /proc/dma
> 4: cascade
>
> + cat -v /proc/mtrr
> reg00: base=0x00000000 ( 0MB), size=2048MB: write-back, count=1
> reg01: base=0x7f800000 (2040MB), size= 8MB: uncachable, count=1
> reg02: base=0x7f700000 (2039MB), size= 1MB: uncachable, count=1
> reg03: base=0xd0000000 (3328MB), size= 256MB: write-combining, count=1
>
> + cat -v /proc/partitions
> major minor #blocks name
>
> 8 0 156290904 sda
> 8 1 31455238 sda1
> 8 2 1 sda2
> 8 5 20972826 sda5
> 8 6 120456 sda6
> 8 7 995998 sda7
> 8 8 9767488 sda8
> 8 9 92976156 sda9
> 254 0 187 dm-0
> 254 1 187 dm-1
> 254 2 9765980 dm-2
> 254 3 92974648 dm-3
> 254 4 995998 dm-4
>
> + cat -v /proc/mounts
> rootfs / rootfs rw 0 0
> none /sys sysfs rw,nosuid,nodev,noexec 0 0
> none /proc proc rw,nosuid,nodev,noexec 0 0
> udev /dev tmpfs rw 0 0
> /dev/mapper/root / ext3 rw,data=ordered 0 0
> /dev/mapper/root /dev/.static/dev ext3 rw,data=ordered 0 0
> tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
> tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
> tmpfs /lib/modules/2.6.20-16-generic/volatile tmpfs rw 0 0
> tmpfs /dev/shm tmpfs rw 0 0
> devpts /dev/pts devpts rw 0 0
> usbfs /dev/bus/usb/.usbfs usbfs rw 0 0
> udev /proc/bus/usb tmpfs rw 0 0
> usbfs /proc/bus/usb/.usbfs usbfs rw 0 0
> fusectl /sys/fs/fuse/connections fusectl rw 0 0
> tmpfs /var/run tmpfs rw,nosuid,nodev,noexec 0 0
> tmpfs /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
> /dev/sda6 /boot ext2 rw 0 0
> /dev/mapper/home /home ext3 rw,data=ordered 0 0
> /dev/disk/by-uuid/D6B62A08B629E9A7 /media/windows_c: fuseblk rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
> /dev/disk/by-uuid/43F381C972A5D9F5 /media/windows_d: fuseblk rw,nosuid,nodev,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
> binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
>
> + cat -v /proc/swaps
> Filename Type Size Used Priority
> /dev/mapper/swap partition 995988 0 -1
>
> + cat -v /proc/meminfo
> MemTotal: 2066824 kB
> MemFree: 1602164 kB
> Buffers: 13052 kB
> Cached: 240588 kB
> SwapCached: 0 kB
> Active: 196736 kB
> Inactive: 174656 kB
> HighTotal: 1170252 kB
> HighFree: 801912 kB
> LowTotal: 896572 kB
> LowFree: 800252 kB
> SwapTotal: 995988 kB
> SwapFree: 995988 kB
> Dirty: 676 kB
> Writeback: 0 kB
> AnonPages: 117676 kB
> Mapped: 45468 kB
> Slab: 21676 kB
> SReclaimable: 9364 kB
> SUnreclaim: 12312 kB
> PageTables: 1992 kB
> NFS_Unstable: 0 kB
> Bounce: 0 kB
> CommitLimit: 2029400 kB
> Committed_AS: 424152 kB
> VmallocTotal: 114680 kB
> VmallocUsed: 9096 kB
> VmallocChunk: 104072 kB
>
> + cat -v /proc/stat
> cpu 5429 126 2421 88994 4607 321 77 0
> cpu0 2603 114 1520 44508 1944 275 65 0
> cpu1 2825 12 901 44485 2662 46 12 0
> intr 316768 127576 1780 0 0 0 0 0 0 16 7 0 0 91270 0 12174 3586 29170 3 1754 49192 0 0 240 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> ctxt 615453
> btime 1186166605
> processes 7813
> procs_running 1
> procs_blocked 0
>
> + cat -v /proc/apm
> cat: /proc/apm: No such file or directory
>
> + cat -v /proc/modules
> hsfhda 109992 1 - Live 0xf8f81000 (F)
> snd_hda_intel 22680 0 - Live 0xf8c15000
> snd_hda_codec 238988 2 hsfhda,snd_hda_intel, Live 0xf8fc9000
> hsfusbcd2 66472 0 - Live 0xf8fb7000
> hsfmc97sis 68760 0 - Live 0xf8ee1000
> hsfmc97ati 67480 0 - Live 0xf8ea5000
> hsfmc97ali 74016 0 - Live 0xf8e91000
> hsfmc97via 69920 0 - Live 0xf8df7000
> hsfmc97ich 72088 0 - Live 0xf8de4000
> hsfpcibasic2 68120 0 - Live 0xf8c8c000
> hsfserial 24580 8 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2, Live 0xf8c0d000
> hsfengine 1307148 9 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial, Live 0xf911b000 (P)
> hsfosspec 105448 14 hsfhda,hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2,hsfserial,hsfengine, Live 0xf8dc9000
> hsfsoar 87304 7 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2, Live 0xf8d58000
> ppp_generic 29076 0 - Live 0xf8db5000
> slhc 7680 1 ppp_generic, Live 0xf8bd6000
> binfmt_misc 12680 1 - Live 0xf8db0000
> rfcomm 40856 0 - Live 0xf8dbe000
> l2cap 25856 5 rfcomm, Live 0xf8d97000
> bluetooth 55908 4 rfcomm,l2cap, Live 0xf8da1000
> i915 24448 2 - Live 0xf8d7c000
> drm 81044 3 i915, Live 0xf8d40000
> ppdev 10116 0 - Live 0xf8d37000
> acpi_cpufreq 10056 1 - Live 0xf8d33000
> cpufreq_ondemand 9228 1 - Live 0xf8ccc000
> cpufreq_userspace 5408 0 - Live 0xf8ce7000
> cpufreq_powersave 2688 0 - Live 0xf8bb0000
> cpufreq_conservative 8200 0 - Live 0xf8ce3000
> cpufreq_stats 7360 0 - Live 0xf8ce0000
> freq_table 5792 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats, Live 0xf8cd6000
> dev_acpi 12292 0 - Live 0xf8cdb000
> sony_acpi 6284 0 - Live 0xf8cd3000
> tc1100_wmi 8068 0 - Live 0xf8cd0000
> pcc_acpi 13184 0 - Live 0xf8cb1000
> dock 10268 0 - Live 0xf8cc8000
> sbs 15652 0 - Live 0xf89eb000
> i2c_ec 6016 1 sbs, Live 0xf8cae000
> i2c_core 22656 1 i2c_ec, Live 0xf8ca1000
> container 5248 0 - Live 0xf8c7c000
> video 16388 0 - Live 0xf8ca8000
> battery 10756 0 - Live 0xf8c78000
> asus_acpi 17308 0 - Live 0xf8c7f000
> backlight 7040 1 asus_acpi, Live 0xf8c6c000
> button 8720 0 - Live 0xf8c68000
> ac 6020 0 - Live 0xf8ba3000
> ext2 66824 1 - Live 0xf8cb6000
> cbc 5504 1 - Live 0xf8c1c000
> ipv6 268960 12 - Live 0xf8cf0000
> sbp2 23812 0 - Live 0xf8c71000
> parport_pc 36388 0 - Live 0xf8c46000
> lp 12452 0 - Live 0xf8c41000
> parport 36936 3 ppdev,parport_pc,lp, Live 0xf8c5d000
> fuse 46612 5 - Live 0xf8c50000
> joydev 10816 0 - Live 0xf8bf4000
> snd_pcm_oss 44544 0 - Live 0xf8c35000
> snd_mixer_oss 17408 1 snd_pcm_oss, Live 0xf8c07000
> snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss, Live 0xf8c20000
> snd_seq_dummy 4740 0 - Live 0xf8bf1000
> snd_seq_oss 32896 0 - Live 0xf8bfd000
> snd_seq_midi 9600 0 - Live 0xf8b9d000
> snd_rawmidi 25472 1 snd_seq_midi, Live 0xf8bd9000
> snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi, Live 0xf8b8a000
> snd_seq 52592 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event, Live 0xf8be3000
> snd_timer 23684 2 snd_pcm,snd_seq, Live 0xf8ba6000
> snd_seq_device 9100 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq, Live 0xf8af6000
> sdhci 18700 0 - Live 0xf8afa000
> mmc_core 26756 1 sdhci, Live 0xf8b95000
> bcm43xx 126824 0 - Live 0xf8bb2000
> ieee80211softmac 31360 1 bcm43xx, Live 0xf8b81000
> ieee80211 34760 2 bcm43xx,ieee80211softmac, Live 0xf8ada000
> ieee80211_crypt 7040 1 ieee80211, Live 0xf8ad7000
> iTCO_wdt 11812 0 - Live 0xf8a7c000
> iTCO_vendor_support 4868 1 iTCO_wdt, Live 0xf8a74000
> snd 54020 10 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device, Live 0xf8ae4000
> soundcore 8672 1 snd, Live 0xf8a78000
> pcspkr 4224 0 - Live 0xf8a15000
> af_packet 23816 4 - Live 0xf8acc000
> serio_raw 7940 0 - Live 0xf8a71000
> psmouse 38920 0 - Live 0xf8ac1000
> snd_page_alloc 10888 2 snd_hda_intel,snd_pcm, Live 0xf8a11000
> intel_agp 25244 1 - Live 0xf8a45000
> agpgart 35400 3 drm,intel_agp, Live 0xf8a3b000
> shpchp 34324 0 - Live 0xf8a31000
> pci_hotplug 32576 1 shpchp, Live 0xf8a28000
> tsdev 8768 0 - Live 0xf8a08000
> evdev 11008 4 - Live 0xf8a04000
> ext3 133128 2 - Live 0xf8a4f000
> jbd 59816 1 ext3, Live 0xf8a18000
> mbcache 9604 2 ext2,ext3, Live 0xf8a00000
> lrw 5376 4 - Live 0xf89fd000
> blkcipher 6784 2 cbc,lrw, Live 0xf89fa000
> gf128mul 9600 1 lrw, Live 0xf89f6000
> sg 36252 0 - Live 0xf8985000
> sr_mod 17060 0 - Live 0xf8961000
> cdrom 37664 1 sr_mod, Live 0xf896e000
> sd_mod 23428 7 - Live 0xf895a000
> generic 5124 0 [permanent], Live 0xf88d7000
> usbhid 26592 0 - Live 0xf8940000
> hid 27392 1 usbhid, Live 0xf88ea000
> ata_piix 15492 6 - Live 0xf88db000
> ohci1394 36528 0 - Live 0xf88e0000
> ieee1394 299448 2 sbp2,ohci1394, Live 0xf8994000
> b44 28044 0 - Live 0xf88c6000
> mii 6528 1 b44, Live 0xf887f000
> ehci_hcd 34188 0 - Live 0xf8897000
> ata_generic 9092 0 - Live 0xf887b000
> libata 125720 2 ata_piix,ata_generic, Live 0xf8917000
> scsi_mod 142348 5 sbp2,sg,sr_mod,sd_mod,libata, Live 0xf88f3000
> uhci_hcd 25360 0 - Live 0xf8884000
> usbcore 134280 6 hsfusbcd2,hsfosspec,usbhid,ehci_hcd,uhci_hcd, Live 0xf88a4000
> thermal 14856 0 - Live 0xf8876000
> processor 31048 2 acpi_cpufreq,thermal, Live 0xf885b000
> fan 5636 0 - Live 0xf8858000
> fbcon 42656 0 - Live 0xf8864000
> tileblit 3584 1 fbcon, Live 0xf883e000
> font 9216 1 fbcon, Live 0xf8854000
> bitblit 6912 1 fbcon, Live 0xf8839000
> softcursor 3200 1 bitblit, Live 0xf883c000
> vesafb 9220 0 - Live 0xf881c000
> capability 5896 0 - Live 0xf8836000
> commoncap 8192 1 capability, Live 0xf8820000
> sha256 12032 0 - Live 0xf8832000
> dm_crypt 14856 1 - Live 0xf882d000
> dm_mod 59084 9 dm_crypt, Live 0xf8840000
> aes_i586 34304 5 - Live 0xf8823000
>
> + cat -v /proc/ldiscs
> cat: /proc/ldiscs: No such file or directory
>
> + sysctl -a
> dev.parport.default.spintime = 500
> dev.parport.default.timeslice = 200
> dev.cdrom.check_media = 0
> dev.cdrom.lock = 1
> dev.cdrom.debug = 0
> dev.cdrom.autoeject = 0
> dev.cdrom.autoclose = 1
> dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.20 2003/12/17
> dev.cdrom.info =
> dev.cdrom.info = drive name: sr0
> dev.cdrom.info = drive speed: 24
> dev.cdrom.info = drive # of slots: 1
> dev.cdrom.info = Can close tray: 1
> dev.cdrom.info = Can open tray: 1
> dev.cdrom.info = Can lock tray: 1
> dev.cdrom.info = Can change speed: 1
> dev.cdrom.info = Can select disk: 0
> dev.cdrom.info = Can read multisession: 1
> dev.cdrom.info = Can read MCN: 1
> dev.cdrom.info = Reports media changed: 1
> dev.cdrom.info = Can play audio: 1
> dev.cdrom.info = Can write CD-R: 1
> dev.cdrom.info = Can write CD-RW: 1
> dev.cdrom.info = Can read DVD: 1
> dev.cdrom.info = Can write DVD-R: 1
> dev.cdrom.info = Can write DVD-RAM: 0
> dev.cdrom.info = Can read MRW: 1
> dev.cdrom.info = Can write MRW: 1
> dev.cdrom.info = Can write RAM: 1
> dev.cdrom.info =
> dev.cdrom.info =
> dev.scsi.logging_level = 0
> dev.mac_hid.mouse_button3_keycode = 100
> dev.mac_hid.mouse_button2_keycode = 97
> dev.mac_hid.mouse_button_emulation = 0
> dev.hpet.max-user-freq = 64
> dev.rtc.max-user-freq = 64
> net.ipv6.conf.eth0.accept_source_route = 0
> net.ipv6.conf.eth0.proxy_ndp = 0
> net.ipv6.conf.eth0.accept_ra_pinfo = 1
> net.ipv6.conf.eth0.accept_ra_defrtr = 1
> net.ipv6.conf.eth0.max_addresses = 16
> net.ipv6.conf.eth0.max_desync_factor = 600
> net.ipv6.conf.eth0.regen_max_retry = 5
> net.ipv6.conf.eth0.temp_prefered_lft = 86400
> net.ipv6.conf.eth0.temp_valid_lft = 604800
> net.ipv6.conf.eth0.use_tempaddr = 0
> net.ipv6.conf.eth0.force_mld_version = 0
> net.ipv6.conf.eth0.router_solicitation_delay = 1
> net.ipv6.conf.eth0.router_solicitation_interval = 4
> net.ipv6.conf.eth0.router_solicitations = 3
> net.ipv6.conf.eth0.dad_transmits = 1
> net.ipv6.conf.eth0.autoconf = 1
> net.ipv6.conf.eth0.accept_redirects = 1
> net.ipv6.conf.eth0.accept_ra = 1
> net.ipv6.conf.eth0.mtu = 1500
> net.ipv6.conf.eth0.hop_limit = 64
> net.ipv6.conf.eth0.forwarding = 0
> net.ipv6.conf.default.accept_source_route = 0
> net.ipv6.conf.default.proxy_ndp = 0
> net.ipv6.conf.default.accept_ra_pinfo = 1
> net.ipv6.conf.default.accept_ra_defrtr = 1
> net.ipv6.conf.default.max_addresses = 16
> net.ipv6.conf.default.max_desync_factor = 600
> net.ipv6.conf.default.regen_max_retry = 5
> net.ipv6.conf.default.temp_prefered_lft = 86400
> net.ipv6.conf.default.temp_valid_lft = 604800
> net.ipv6.conf.default.use_tempaddr = 0
> net.ipv6.conf.default.force_mld_version = 0
> net.ipv6.conf.default.router_solicitation_delay = 1
> net.ipv6.conf.default.router_solicitation_interval = 4
> net.ipv6.conf.default.router_solicitations = 3
> net.ipv6.conf.default.dad_transmits = 1
> net.ipv6.conf.default.autoconf = 1
> net.ipv6.conf.default.accept_redirects = 1
> net.ipv6.conf.default.accept_ra = 1
> net.ipv6.conf.default.mtu = 1280
> net.ipv6.conf.default.hop_limit = 64
> net.ipv6.conf.default.forwarding = 0
> net.ipv6.conf.all.accept_source_route = 0
> net.ipv6.conf.all.proxy_ndp = 0
> net.ipv6.conf.all.accept_ra_pinfo = 1
> net.ipv6.conf.all.accept_ra_defrtr = 1
> net.ipv6.conf.all.max_addresses = 16
> net.ipv6.conf.all.max_desync_factor = 600
> net.ipv6.conf.all.regen_max_retry = 5
> net.ipv6.conf.all.temp_prefered_lft = 86400
> net.ipv6.conf.all.temp_valid_lft = 604800
> net.ipv6.conf.all.use_tempaddr = 0
> net.ipv6.conf.all.force_mld_version = 0
> net.ipv6.conf.all.router_solicitation_delay = 1
> net.ipv6.conf.all.router_solicitation_interval = 4
> net.ipv6.conf.all.router_solicitations = 3
> net.ipv6.conf.all.dad_transmits = 1
> net.ipv6.conf.all.autoconf = 1
> net.ipv6.conf.all.accept_redirects = 1
> net.ipv6.conf.all.accept_ra = 1
> net.ipv6.conf.all.mtu = 1280
> net.ipv6.conf.all.hop_limit = 64
> net.ipv6.conf.all.forwarding = 0
> net.ipv6.conf.lo.accept_source_route = 0
> net.ipv6.conf.lo.proxy_ndp = 0
> net.ipv6.conf.lo.accept_ra_pinfo = 1
> net.ipv6.conf.lo.accept_ra_defrtr = 1
> net.ipv6.conf.lo.max_addresses = 16
> net.ipv6.conf.lo.max_desync_factor = 600
> net.ipv6.conf.lo.regen_max_retry = 5
> net.ipv6.conf.lo.temp_prefered_lft = 86400
> net.ipv6.conf.lo.temp_valid_lft = 604800
> net.ipv6.error: "Operation not permitted" reading key "net.ipv6.route.flush"
> conf.lo.use_tempaddr = -1
> net.ipv6.conf.lo.force_mld_version = 0
> net.ipv6.conf.lo.router_solicitation_delay = 1
> net.ipv6.conf.lo.router_solicitation_interval = 4
> net.ipv6.conf.lo.router_solicitations = 3
> net.ipv6.conf.lo.dad_transmits = 1
> net.ipv6.conf.lo.autoconf = 1
> net.ipv6.conf.lo.accept_redirects = 1
> net.ipv6.conf.lo.accept_ra = 1
> net.ipv6.conf.lo.mtu = 16436
> net.ipv6.conf.lo.hop_limit = 64
> net.ipv6.conf.lo.forwarding = 0
> net.ipv6.neigh.eth0.base_reachable_time_ms = 30000
> net.ipv6.neigh.eth0.retrans_time_ms = 1000
> net.ipv6.neigh.eth0.locktime = 0
> net.ipv6.neigh.eth0.proxy_delay = 80
> net.ipv6.neigh.eth0.anycast_delay = 100
> net.ipv6.neigh.eth0.proxy_qlen = 64
> net.ipv6.neigh.eth0.unres_qlen = 3
> net.ipv6.neigh.eth0.gc_stale_time = 60
> net.ipv6.neigh.eth0.delay_first_probe_time = 5
> net.ipv6.neigh.eth0.base_reachable_time = 30
> net.ipv6.neigh.eth0.retrans_time = 250
> net.ipv6.neigh.eth0.app_solicit = 0
> net.ipv6.neigh.eth0.ucast_solicit = 3
> net.ipv6.neigh.eth0.mcast_solicit = 3
> net.ipv6.neigh.lo.base_reachable_time_ms = 30000
> net.ipv6.neigh.lo.retrans_time_ms = 1000
> net.ipv6.neigh.lo.locktime = 0
> net.ipv6.neigh.lo.proxy_delay = 80
> net.ipv6.neigh.lo.anycast_delay = 100
> net.ipv6.neigh.lo.proxy_qlen = 64
> net.ipv6.neigh.lo.unres_qlen = 3
> net.ipv6.neigh.lo.gc_stale_time = 60
> net.ipv6.neigh.lo.delay_first_probe_time = 5
> net.ipv6.neigh.lo.base_reachable_time = 30
> net.ipv6.neigh.lo.retrans_time = 250
> net.ipv6.neigh.lo.app_solicit = 0
> net.ipv6.neigh.lo.ucast_solicit = 3
> net.ipv6.neigh.lo.mcast_solicit = 3
> net.ipv6.neigh.default.base_reachable_time_ms = 30000
> net.ipv6.neigh.default.retrans_time_ms = 1000
> net.ipv6.neigh.default.gc_thresh3 = 1024
> net.ipv6.neigh.default.gc_thresh2 = 512
> net.ipv6.neigh.default.gc_thresh1 = 128
> net.ipv6.neigh.default.gc_interval = 30
> net.ipv6.neigh.default.locktime = 0
> net.ipv6.neigh.default.proxy_delay = 80
> net.ipv6.neigh.default.anycast_delay = 100
> net.ipv6.neigh.default.proxy_qlen = 64
> net.ipv6.neigh.default.unres_qlen = 3
> net.ipv6.neigh.default.gc_stale_time = 60
> net.ipv6.neigh.default.delay_first_probe_time = 5
> net.ipv6.neigh.default.base_reachable_time = 30
> net.ipv6.neigh.default.retrans_time = 250
> net.ipv6.neigh.default.app_solicit = 0
> net.ipv6.neigh.default.ucast_solicit = 3
> net.ipv6.neigh.default.mcast_solicit = 3
> net.ipv6.mld_max_msf = 64
> net.ipv6.ip6frag_secret_interval = 600
> net.ipv6.ip6frag_time = 60
> net.ipv6.ip6frag_low_thresh = 196608
> net.ipv6.ip6frag_high_thresh = 262144
> net.ipv6.bindv6only = 0
> net.ipv6.icmp.ratelimit = 250
> n