[hsflinux] my hayes usb does not always work on boot

[Linuxant support (Jonathan)]

Hi,

you need to identify the exact source of the problem before trying to 
find an appropriate fix.

When it doesn't work and before you replug the modem, are you able to 
see your modem in the output of the 'lsusb' command in a root shell? If 
you can see the modem, if you use the 'hsfconfig --info' command, does 
it solve the problem instead of replugging the device?

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



René wrote:
> hi!
> 
>    i have a usb modem Hayes V.92, Series 0375. I'm using Debian 4.0 
> (Etch), with kernel 2.6.19.7. I successfully installed the hsf driver, 
> and the modem does work. But, i have this problem: if i turn off the pc, 
> the modem doesn't work after boot. If the modem is not working, and I 
> unplug the modem, and plug it again, it's recognized and works. If the 
> modem is working, and I reboot without cycling power, then it continues 
> working after boot. What could i do for the modem to work without the 
> plug / unplug move?
> 
> 
>    tia,
>    René
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux