<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2715.400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I have frequent problems with connecting to ISP using HSF
modem in Linux. The problem happens very frequently in Linux and never happens
in Windows XP. The modem does not get any signal after dialing the number to
ISP(I can hear dialtone and dialing sound) and stays there and times
out after sometime. Once I encounter the problem, connecting to ISP fails always
for a few days, but it always works in Windows. Once it starts working, it works
fine for a few days. the following shows the output of last call information.
Any help with this problem will be greatly appreciated. My system is a gateway
9550 solo laptop and I have Redhat 7.2.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Shaji</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2><FONT size=2>
<P>Welcome to minicom 1.83.1 </P>
<P></P>
<P>OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n </P>
<P>Compiled on Aug 28 2001, 15:09:33. </P>
<P></P>
<P>Press CTRL-A Z for help on special keys </P>
<P></P>
<P>AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0 </P>
<P>OK </P>
<P></P>
<P>ATI9 </P>
<P>INDIA </P>
<P>OK </P>
<P></P>
<P>atdp172233 </P>
<P>NO CARRIER </P>
<P>at#ug </P>
<P><#UG VERSION=1></P>
<P><UNIMODEM VERSION=10></P>
<P><CALL SETUP RESULT=Detected No Recognizable Tone></P>
<P><MULTIMEDIA MODE=Data Only> </P>
<P><DTE-DCE MODE=Async data> </P>
<P><V.8 CM octet string=""></P>
<P><V.8 JM octet string=""> </P>
<P><RX SIG POWER DB=0, TX SIG POWER DB=0, S/N RATIO DB=0> </P>
<P><NORMALIZED MEAN SQUARED ERROR=0> </P>
<P><NEAR ECHO LOSS=0> </P>
<P><FAR ECHO LOSS=0> </P>
<P><FAR ECHO DELAY=0> </P>
<P><ROUND TRIP DELAY=0> </P>
<P><V.34 INFO bit map =0></P>
<P><TX MOD=V.17, TX SYMBOL RATE=0, TX CARRIER FREQ=0> </P>
<P><RX MOD=V.17, RX SYMBOL RATE=0, RX CARRIER FREQ=0> </P>
<P><TX FIRST DATA RATE=0, RX FIRST DATA RATE=0> </P>
<P><CARRIER LOSS=0, RATE RENEG=0> </P>
<P><RETRAINS REQ=0, RETRAINS DET=0> </P>
<P><TX FINAL RATE=0, RX FINAL RATE=0></P>
<P><PROTOCOL NEGOTIATION=None> </P>
<P><EC FRAME SIZE=0> </P>
<P><EC LINK TIMEOUTS=0> </P>
<P><EC LINK NAKS=0> </P>
<P><COMPRESSION NEGOTIATION=None> </P>
<P><COMPRESSION DICTIONARY SIZE=0></P>
<P><TX FLOW CONTROL=0> </P>
<P><RX FLOW CONTROL=0></P>
<P><TX CHARS SENT FROM DTE=7> </P>
<P><RX CHARS SENT TO DTE=14> </P>
<P><TX CHARS LOST=0> </P>
<P><RX CHARS LOST=0></P>
<P><TX FRAME COUNT=0> </P>
<P><RX FRAME COUNT=0> </P>
<P><TX FRAME ERROR COUNT=0> </P>
<P><RX FRAME ERROR COUNT=0></P>
<P><TERMINATION CAUSE=Key abort> </P>
<P><LSD Vdd=0, Power Bits=0> </P>
<P><V8BIS FLEX VERSION=0, V8BIS DSP VERSION=0> </P>
<P><RATE RENEG REQ=0, RATE RENEG DET=0> </P>
<P><HIGH PASS FILTER ENABLED=0> </P>
<P><ROBBED BIT PATTERN=0> </P>
<P><DIGITAL PAD DETECTED=0, DIGITAL LOSS ESTIMATE=0> </P>
<P><Cnt1=0, Det1=0, Res1=0> </P>
<P><EQM=0, TRAINING EQM SUM=0> </P>
<P><DIB ERROR COUNTERS=0, 0, 0, 0, 0, 0, 0, 0> </P>
<P><RETRAIN/HDLC RESET=0> </P>
<P>OK</P></FONT></FONT></DIV></BODY></HTML>