From riptide-announce-admin@lists.mbsi.ca Wed Jun 12 02:24:01 2002 Received: from valve.mbsi.ca (localhost.mbsi.ca [127.0.0.1]) by valve.mbsi.ca with ESMTP id g5C6O1De011166; Wed, 12 Jun 2002 02:24:01 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [198.168.101.5]) (authenticated bits=128) by valve.mbsi.ca with ESMTP id g5C6NeDg011157 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Wed, 12 Jun 2002 02:23:40 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [127.0.0.1]) by endlich.mbsi.ca with ESMTP id g5C6Ndsc004988 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Wed, 12 Jun 2002 02:23:39 -0400 Received: (from marc@localhost) by endlich.mbsi.ca (8.12.2/8.12.2/Submit) id g5C6NdTW004986; Wed, 12 Jun 2002 02:23:39 -0400 From: Marc Boucher To: riptide-announce@lists.mbsi.ca Cc: hcflinux-announce@lists.mbsi.ca, hsflinux-announce@lists.mbsi.ca Message-ID: <20020612062339.GA4939@endlich.mbsi.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.0-current-20020421i X-BeenThere: riptide-announce@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk Reply-To: marc+riptide@mbsi.ca Date: Wed, 12 Jun 2002 02:23:39 -0400 Subject: [riptide] [riptide-announce] New riptide-0.3mbsibeta02061100 linux driver available Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hi, I am pleased to announce the first public open-source release of the Conexant (Rockwell) RipTide Audio/Communication Controller driver for Linux. It is now available for download from http://www.mbsi.ca/cnxtlindrv The README file is appended below. Cheers Marc ---- This package contains Linux drivers for the Conexant (Rockwell) RipTide Audio/Communication Controller. It was developed by Conexant Systems Inc (Konstantin Lazarev) and Marc Boucher , who is the current maintainer. If you have a RipTide HCF modem (127A:4321 or 127A:4331), you need to install *both* the RIPTIDE and HCF drivers, otherwise the modem will *not* work. RipTide HSF modems (127A:4311 or 14F1:4311) require only the HSF driver, on top of which the RIPTIDE driver can be optionally installed to add audio, synth, midi, and gameport functionality. RIPTIDE driver Features: ----------------------- 1. OSS compatible. 2. Full duplex PCM playback and record. 3. Multiple playback channels (/dev/dsp). 4. Mixer support (/dev/mixer). 5. Supports direct access interface for games such as Quake2. 6. Supports OPL3 synthesis (/dev/sequencer) 7. Supports MPU401 external MIDI (/dev/midi) 8. Supports joystick at port 0x201 with system driver (joy-analog.o should be loaded) 9. Interoperates with HCF and HSF modem drivers. The latest version and related information are available at http://www.mbsi.ca/cnxtlindrv on the web. These drivers should work on most current Linux distributions, based on the 2.2.x or 2.4.x kernels. On some systems, it might be necessary to disable the "PnP OS" BIOS option if it exists. See the INSTALL file for installation instructions. THIS IS PRELIMINARY SOFTWARE WHICH MAY CONTAIN BUGS THAT COULD CAUSE CRASHES AND DATA CORRUPTION. THE USE OF THIS SOFTWARE IS AT YOUR OWN RISK. WE DO NOT PRESENTLY RECOMMEND USING IT ON CRITICAL SYSTEMS AND ONLY AFTER DOING COMPLETE BACKUPS. Some features may not be implemented or work as expected. Bug reports are welcome. (see section "REPORTING PROBLEMS" in INSTALL file) Most files in this package are released under terms similar to the BSD license. See the files LICENSE for details. _______________________________________________ riptide-announce mailing list riptide-announce@lists.mbsi.ca https://www.mbsi.ca/mailman/listinfo/riptide-announce From pao@mailandnews.com Sat Jun 15 15:58:35 2002 Received: from mailandnews.com (smfs.shanjemail.com [209.81.157.230] (may be forged)) by valve.mbsi.ca with ESMTP id g5FJwWDe020329 for ; Sat, 15 Jun 2002 15:58:35 -0400 Received: from localhost.localdomain [128.61.75.58] (pao@mailandnews.com) by mailandnews.com; Sat, 15 Jun 2002 15:58:26 -0400 X-WM-Posted-At: mailandnews.com; Sat, 15 Jun 02 15:58:26 -0400 From: "Patrick O'Leary" To: riptide@lists.mbsi.ca Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.5 Date: 15 Jun 2002 15:58:05 -0400 Message-Id: <1024171106.5992.28.camel@deltaq> Mime-Version: 1.0 Subject: [riptide] Audio on currently unsupported setup Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: I have a Riptide HSF chipset, with PCI ID 127A:4311, which is listed as "sound not supported". I have successfully installed the kernel modules for HSF and Riptide (module versions: HSF, 5.03.02.L2mbsibeta02060200; Riptide, 0.3mbsibeta02061200; kernel version 2.4.18, custom compiled on Debian Woody). After a quick chmod 666 /dev/dsp, I can play things to the sound card (XMMS shows visualizations properly). However, nothing comes out of the speakers. The problem is not with the hardware (sound is fine in Windows 2000 SP2) but something in configuration or the driver. I am not sure what. Is there any diagnostic information I could give that would help clear up the "sound not supported" issue? Also, I just noticed that while playing sound from XMMS, every text console is flooded with "-------POLL------" messages, with more dashes than I showed. This doesn't happen when I cat a sound file on the command line. Thanks for taking on the driver project though; I'm glad to see someone is working on it even if I don't need the modem support. -- Patrick O'Leary pao@mailandnews.com From dholth@stetson.edu Thu Jun 20 18:50:16 2002 Received: from purple-mail-25.mailpod.inside.strato.net (mailout.strato.net [205.160.247.97]) by valve.mbsi.ca with ESMTP id g5KMoG5t008400 for ; Thu, 20 Jun 2002 18:50:16 -0400 Received: from un003-93.strato.net (un003-93.strato.net [207.30.167.93]) by purple-mail-25.mailpod.inside.strato.net (8.12.3/8.12.3) with ESMTP id g5KMo7mO013980 for ; Thu, 20 Jun 2002 18:50:14 -0400 (EDT) From: Danny Holth To: riptide@lists.mbsi.ca Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.5 Date: 20 Jun 2002 18:49:38 -0400 Message-Id: <1024613386.3808.10.camel@localhost.localdomain> Mime-Version: 1.0 Subject: [riptide] no modem + pcm at same time Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Riptide wizards, When I use my HSF modem (127a:4310) with the riptide sound driver [thanks for the driver!] I can't figure out how to mute the modem noise without muting the PCM audio. Any tips? Thanks, Daniel Holth From Frederic.NYER@wanadoo.fr Sun Jun 30 09:20:15 2002 Received: from mailhub1.isdnet.net (mailhub1.isdnet.net [195.154.209.21]) by valve.mbsi.ca with ESMTP id g5UDKEmi002602 for ; Sun, 30 Jun 2002 09:20:15 -0400 Received: from pavilion ([62.39.25.193]) by mailhub1.isdnet.net (8.9.3/8.9.3) with SMTP id PAA50035 for ; Sun, 30 Jun 2002 15:20:12 +0200 (CEST) Message-ID: <009901c22038$c7722840$c119273e@pavilion> Reply-To: "Frederic NYER" From: "Frederic NYER" To: Date: Sun, 30 Jun 2002 15:19:34 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Subject: [riptide] Issues with Riptide HCF Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: A few issues when trying to use the hcf/riptide drivers (172A 4320) Any hint/suggestion is welcome, (I can provide additional info if needed) Fred. 1. After KDE Login: ------------------- Error Window Displayed: "Sound server fatal error: cpu overload, aborting" This happens between 10second to a few minutes after login. 2. POLL messages in /var/log/messages ------------------------------------- All system resources used by POLL messages loged in /var/log/messages when playing mp3 using xmms. Exact message is: ------------------------------ POLL ----------------------------------------- Problem disapears when removing corresponding 'printk' from /usr/lib/riptide/modules/riptidem.c (line 2410). Xmms seems to work smoothly then. 3. Can't get modem to connect to phone line ------------------------------------------- ATD command doesn't seem to toggle line switch. I checked that using another phone plugged on the same phone line. 4. Audio CD Playing ------------------- Audio CD playing works fine as long as don't use any mixer (kmix). As soon as use kmix, I can only hear the left voice. Killing kmix doesn't make the balance go back OK. 5. For Reference dmesg log: --------------------------- YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 Conexant Sound Driver v0.3mbsibeta02061200 time 13:25:10 Jun 30 2002 Init_module is completed version v0.3mbsibeta02061200 time 13:25:04 Jun 30 2002 Look for 127a 4320<6>PCI: Found IRQ 10 for device 01:08.0 PCI: Sharing IRQ 10 with 00:01.0 PCI: Sharing IRQ 10 with 01:08.1 - found at io 2000 irq 10 Start allocation of resources: c3e5bdc0 Register hardware c3e5bdc0 register is successful Resources are allocated: io 0x2000 irq 10 Init command interface: 2000 a c8f7d540 RipTide version before: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 Firmware size: 15597 Start RiptideLoadImage Firmware is loaded. RipTide version after: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 requesting io ports 0x2000-0x203f Init command riptide: 2000 a c8f7d540 c45def20 c8f6dac0 c45de5f0 at 0x330 irq 10 dma 0,0 riptide FM at io ports 0x388-0x38b at 0x388 Init_module is completed: index = 0 From barth@cck.uni-kl.de Thu Jul 4 03:48:34 2002 Received: from uni-kl.de (mail.uni-kl.de [131.246.137.52]) by valve.mbsi.ca with ESMTP id g647mX9K005767 for ; Thu, 4 Jul 2002 03:48:34 -0400 Received: from mailgate2.uni-kl.de (mailgate2.uni-kl.de [131.246.120.7]) by uni-kl.de (8.12.4/8.12.4) with ESMTP id g647mWQl003951; Thu, 4 Jul 2002 09:48:32 +0200 (MET DST) Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de [131.246.239.10]) by mailgate2.uni-kl.de (8.12.1/8.12.1) with ESMTP id g647mVGD007089; Thu, 4 Jul 2002 09:48:31 +0200 Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id JAA26383; Thu, 4 Jul 2002 09:48:31 +0200 (MET DST) Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id JAA23566; Thu, 4 Jul 2002 09:48:02 +0200 From: "Christian Barth" To: newbie@xfree86.org, riptide@lists.mbsi.ca Date: Thu, 4 Jul 2002 09:47:59 +0200 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Message-ID: <3D2419CF.12919.4A25C9@localhost> Priority: normal X-mailer: Pegasus Mail for Win32 (v3.12c) Subject: [riptide] XFree86 4.2.0 "trident" and Conexant HSFi modem Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hello! I have a RH 7.3 (kernel 2.4.18) PC with an MSI MS-6368 Mainbord with integrated trident blade 2d/3d video accelerator and a "Acer Modem 56 Surf PCI" which uses the Conexant HSFi chipset. All works well as long as I use (the slow) XF86_SVGA 3.3.6a X-Server. If I use X 4.2.0 things stop working as soon as I move a window: The connection gets very bad and the modem hangs up. Any ideas? How to debug this? This happens with the modem drivers supplied by conexant as well as with the new beta drivers. I have tried debian 3.0 as well with a costum 2.4.18 kernel: same situation. It is not with kde, because it happens with fvwm2 as well. I have a cerleon 1100 Mhz cpu and 256 MB RAM. BTW, X 4.2.0 dedects the 8 MB RAM (supplied by the main borad), but only uses 4 of them. Thanks, Christian _________________________________________________________________ In a world without walls and fences, who needs windows and gates? From perturbed@subdimension.com Tue Jul 9 11:12:43 2002 Received: from smtp02.iprimus.net.au (smtp02.iprimus.net.au [210.50.76.70]) by valve.mbsi.ca with ESMTP id g69FCfdm029388 for ; Tue, 9 Jul 2002 11:12:42 -0400 Received: from subdimension.com ([203.134.17.145]) by smtp02.iprimus.net.au with Microsoft SMTPSVC(5.0.2195.4617); Wed, 10 Jul 2002 01:12:39 +1000 Message-ID: <3D2AFF4B.5050800@subdimension.com> Date: Tue, 09 Jul 2002 23:20:43 +0800 From: Clark Bang User-Agent: Mozilla/5.0 (X11; U; Linux 2.4.18 i686; en-US; rv:0.9.1) Gecko/20010610 X-Accept-Language: en-us MIME-Version: 1.0 To: riptide@lists.mbsi.ca Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 09 Jul 2002 15:12:39.0898 (UTC) FILETIME=[10E893A0:01C2275B] Subject: [riptide] re: Spinlock? Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: hello, got the modem working fine but am unable to install the sound with the following error below from ripconfig log rm -f *.o *.a * Compiling int_mdl.c * Compiling rp_cmdif.c * Compiling linux.c linux.c: In function `init_spinlock': linux.c:123: structure has no member named `spinlock' linux.c: In function `release_spinlock': linux.c:133: structure has no member named `spinlock' make: *** [linux.o] Error 1 did a smartass thing and tried unsuccessfully to uncomment the asm/spinlock.h header in /usr/lib/ripconfig/modules/linux.c even tried changing it to linux/spinlock.h help? anyone? From jpeter20@yahoo.com Sun Jul 14 21:35:55 2002 Received: from web20710.mail.yahoo.com (web20710.mail.yahoo.com [216.136.226.183]) by valve.mbsi.ca with SMTP id g6F1ZsBu013817 for ; Sun, 14 Jul 2002 21:35:54 -0400 Message-ID: <20020715013553.37838.qmail@web20710.mail.yahoo.com> Received: from [68.42.156.171] by web20710.mail.yahoo.com via HTTP; Sun, 14 Jul 2002 18:35:53 PDT Date: Sun, 14 Jul 2002 18:35:53 -0700 (PDT) From: James Petersen To: riptide@lists.mbsi.ca MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [riptide] depmod unresolved symbols on Riptide RPM Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hello to Riptide users! (and Marc Boucher) Here's a possible bug report for the beta version of the Riptide RPM for SuSE 8.0 2.4.18-4GB... I have successfully loaded the HSF modem RPM, and minicom works now with the Conexant HSF modem. However, the Riptide RPM for SuSE 8.0, and the generic RPM, when loaded, both give depmod errors about unresolved symbols. Here's the output of the rpm -Uvh command: This package does not contain pre-built modules suitable for your system: Distribution: SuSE-8.0 Kernel arch: i686 Kernel version: linux-2.4.18-4GB Trying to automatically re-compile the modules.. (this requires a C compiler and proper kernel sources to be installed) Where is the linux source build directory that matches your running kernel? [/lib/modules/2.4.18-4GB/build] Re-compiling RIPTIDE modules for kernel 2.4.18-4GB, using source directory /lib/modules/2.4.18-4GB/build. Please wait.. Re-compilation and installation of RIPTIDE modules succeeded. depmod: *** Unresolved symbols in /lib/modules/2.4.18-4GB/misc/riptideint.o depmod: kmap_pagetable depmod: *** Unresolved symbols in /lib/modules/2.4.18-4GB/misc/riptidelow.o depmod: kmap_pagetable depmod: *** Unresolved symbols in /lib/modules/2.4.18-4GB/misc/riptidesound.o depmod: kmap_pagetable RIPTIDE module configuration completed. Anyone have any ideas? Thanks! --Jim Petersen __________________________________________________ Do You Yahoo!? Yahoo! Autos - Get free new car price quotes http://autos.yahoo.com From riptide-announce-admin@lists.mbsi.ca Sun Sep 1 23:50:02 2002 Received: from valve.mbsi.ca (localhost.mbsi.ca [127.0.0.1]) by valve.mbsi.ca with ESMTP id g823o2YN032327; Sun, 1 Sep 2002 23:50:02 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [198.168.101.5]) by valve.mbsi.ca with ESMTP id g823nmYO032312 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Sun, 1 Sep 2002 23:49:49 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [192.168.73.1] (may be forged)) by endlich.mbsi.ca with ESMTP id g823nqk9013741 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Sun, 1 Sep 2002 23:49:52 -0400 Received: (from marc@localhost) by endlich.mbsi.ca (8.12.5/8.12.5/Submit) id g823nqcb013739; Sun, 1 Sep 2002 23:49:52 -0400 From: Marc Boucher To: riptide-announce@lists.mbsi.ca Cc: hsflinux-announce@lists.mbsi.ca, hcflinux-announce@lists.mbsi.ca Message-ID: <20020902034951.GA13638@endlich.mbsi.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.1i X-BeenThere: riptide-announce@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk Reply-To: marc+riptide@mbsi.ca Date: Sun, 1 Sep 2002 23:49:51 -0400 Subject: [riptide] [riptide-announce] New riptide-0.4mbsibeta02090100 linux driver release Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hi, A new experimental version of the open-source Conexant (Rockwell) RipTide Audio/Communication Controller driver for Linux is now available from http://www.mbsi.ca/cnxtlindrv This release incorporates significant fixes. Keep in mind however that the driver is still very preliminary. Nonetheless we recommend that all users of the previous version upgrade. A detailed list of changes since the first release in June is available below. Please report any new or persisting problems. Cheers Marc PS: Archived copies of previous releases are available via a link located at the bottom of the main download page. Sun Sep 01 2002 Marc Boucher * Released riptide-0.4mbsibeta02090100. Sun Sep 01 2002 Marc Boucher * modules/riptidem.c: rt_poll(): finally implemented! Debug msgs gone. Driver should now work with desktop audio daemons, such as KDE's artsd. * modules/riptidem.c: rt_read_dsp(), rt_write_dsp(): don't sleep if O_NONBLOCK. * scripts/ripconfig.in: added extra /etc/modules.conf aliases for automatic devfs module loading. * makefile: added Mandrake 2.4.18-8.1mdk kernel. * makefile: added RedHat 2.4.9-34, 2.4.18-5, and 2.4.18-10 kernels. * Added modules/kernelcompiler.sh, a small script which tries to guess which compiler should be used to build kernel modules. * modules/common.mak: use kernelcompiler.sh to determine default CC * modules/common.mak, INSTALL: added notes about KERNELSRC for Debian 3.0 users. Wed Jun 12 2002 Marc Boucher * Released riptide-0.3mbsibeta02061200. Wed Jun 12 2002 Marc Boucher * scripts/ripconfig.in: dynamically allocate sound-slot-N alias names. * modules/rt_mdl.c: do not request_region() for hwIOSynth as it conflicts with opl3 module. * modules/: silenced some debugging messages. Tue Jun 11 2002 Marc Boucher * Initial beta version (riptide-0.3mbsibeta02061100). _______________________________________________ riptide-announce mailing list riptide-announce@lists.mbsi.ca https://www.mbsi.ca/mailman/listinfo/riptide-announce From Frederic.NYER@wanadoo.fr Sun Sep 8 08:15:04 2002 Received: from mailhub10.isdnet.net (mailhub10.isdnet.net [195.154.209.131]) by valve.mbsi.ca with ESMTP id g88CF2uF023303 for ; Sun, 8 Sep 2002 08:15:03 -0400 Received: from pavilion (ld-oreka-92-30-39-62.rtc.firstream.net [62.39.30.92] (may be forged)) by mailhub10.isdnet.net (8.9.3/8.9.3) with SMTP id OAA71585 for ; Sun, 8 Sep 2002 14:14:53 +0200 (CEST) Message-ID: <001e01c25731$22e5e160$5c1e273e@pavilion> Reply-To: "Frederic NYER" From: "Frederic NYER" To: Date: Sun, 8 Sep 2002 14:13:20 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Subject: [riptide] artsd OK but HCF modem still fails Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.11 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Marc, Great job ! I confirm that artsd now works fine. This is the first time I get alert sounds under KDE ! Also I confirm that the poll messages have disappeard. Xmms no longer eats up cpu by flooding the system log. Only the issue with kmix and CD playing remains (As already reported in my post dated June 30th) Unfortunately, I still cannot get my Riptide HCF modem to work (127A:4321). I am able to successfully use any kind of AT command except ATA, ATH and ATD. In fact, none of these commands will toggle the line switch and the line will remain hanged up. Has anyone been able to have riptide HCF modem to work ? If yes, any suggestion is welcome, Thanks, Fred From capt_david@hotmail.com Fri Oct 4 16:50:56 2002 Received: from hotmail.com (f47.law7.hotmail.com [216.33.237.47]) by valve.mbsi.ca with ESMTP id g94Kost9026291 for ; Fri, 4 Oct 2002 16:50:55 -0400 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 4 Oct 2002 13:50:47 -0700 Received: from 165.91.221.89 by lw7fd.law7.hotmail.msn.com with HTTP; Fri, 04 Oct 2002 20:50:46 GMT X-Originating-IP: [165.91.221.89] From: "David Veksler" To: riptide@lists.mbsi.ca Date: Fri, 04 Oct 2002 15:50:46 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 04 Oct 2002 20:50:47.0496 (UTC) FILETIME=[B7329C80:01C26BE7] Subject: [riptide] Riptide Audio Driver Problem! Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hi, I am unable to get my Conexant Riptide audio card to work, and I was wondering if someone on this listserv could help me out. I downloaded the source for the .4 audio driver and compiled it for my Mandrake 9 2.4.19 kernel. It installed successfully, and without any errors, and I can see the mixer, and turn up the mike gain volume till I hear audio fedback, however when I try to initialize aRts, it fails "unable to initiallize io" and I lose my mixer- the same thing happens when I try to run aRts on startup. I am also unable to play any audio in any of the media players I tried. Anyone have any ideas? I included the beggining of my dump file, and will send the whole thing to anyone who wants to take a look. Also, when I run ripstop I get: riptidelow: Device or resource busy re-running ripconfig recomiples and installs without any error however. Thanks, --David + date Thu Oct 3 17:53:48 CDT 2002 + ripconfig --version 0.4mbsibeta02090100 linux-i686(i686)-2.4.19-16mdk-MODVERS Mandrake-9.0 + uname -a Linux localhost.localdomain 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002 i686 unknown unknown GNU/Linux + cat /proc/version Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002 + cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 10 cpu MHz : 398.200 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 794.62 + lspci -n 00:00.0 Class 0600: 8086:7190 (rev 03) 00:01.0 Class 0604: 8086:7191 (rev 03) 00:03.0 Class 0607: 1217:6872 (rev 05) 00:06.0 Class 0401: 127a:4310 00:06.1 Class 0780: 127a:4311 00:06.2 Class 0980: 127a:4312 00:07.0 Class 0601: 8086:7110 (rev 02) 00:07.1 Class 0101: 8086:7111 (rev 01) 00:07.2 Class 0c03: 8086:7112 (rev 01) 00:07.3 Class 0680: 8086:7113 (rev 03) 01:00.0 Class 0300: 126f:0710 (rev a3) + lspci -n -vvv 00:00.0 Class 0600: 8086:7190 (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:01.0 Class 0604: 8086:7191 (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B+ 00:03.0 Class 0607: 1217:6872 (rev 05) Subsystem: 1217:6872 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 00:06.0 Class 0401: 127a:4310 Subsystem: 127a:4310 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 121k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,1): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 31238 EXT3-fs: ide0(3,1): 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002 usb-uhci.c: High bandwidth mode enabled PCI: Enabling device 00:07.2 (0000 -> 0001) PCI: Assigned IRQ 5 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0xfcc0, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal Adding Swap: 253976k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 Linux Kernel Card Services Kernel Version options: [pci] [cardbus] [pm] PCI: Assigned IRQ 5 for device 00:03.0 Yenta IRQ list 0c98, PCI irq5 Socket status: 30000411 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. eth0: NE2000 (DL10022 rev 30): io 0x300, irq 3, hw_addr 00:48:54:C0:55:8B Installing knfsd (copyright (C) 1996 okir@monad.swb.de). YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996 Conexant Sound Driver v0.4mbsibeta02090100 time 23:45:20 Oct 1 2002 Init_module is completed version v0.4mbsibeta02090100 time 23:45:09 Oct 1 2002 Look for 127a 4320 - absent Look for 127a 4330 - absent Look for 127a 4310PCI: Enabling device 00:06.0 (0000 -> 0001) PCI: Assigned IRQ 5 for device 00:06.0 PCI: Sharing IRQ 5 with 00:06.1 - found at io fc40 irq 5 Start allocation of resources: c97a31a0 Register hardware c97a31a0 register is successful Resources are allocated: io 0xfc40 irq 5 Init command interface: fc40 5 cab945c0 RipTide version before: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 Firmware size: 15597 Start RiptideLoadImage Firmware is loaded. RipTide version after: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 requesting io ports 0xfc40-0xfc7f Init command riptide: fc40 5 cab945c0 c752f320 cab08a90 c752f2f0 riptide FM at io ports 0x388-0x38b Init_module is completed: index = 2 inserting floppy driver for 2.4.19-16mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com From riptide-announce-admin@lists.mbsi.ca Thu Oct 10 20:48:01 2002 Received: from valve.mbsi.ca (localhost.mbsi.ca [127.0.0.1]) by valve.mbsi.ca with ESMTP id g9B0m1Kv028950; Thu, 10 Oct 2002 20:48:01 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [198.168.101.5]) by valve.mbsi.ca with ESMTP id g9B0ckKw028767 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=FAIL); Thu, 10 Oct 2002 20:38:50 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [127.0.0.1]) by endlich.mbsi.ca with ESMTP id g9B0cn4S031311 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Fri, 11 Oct 2002 02:38:49 +0200 Received: (from marc@localhost) by endlich.mbsi.ca (8.12.5/8.12.5/Submit) id g9B0cni2031310; Fri, 11 Oct 2002 02:38:49 +0200 From: Marc Boucher To: riptide-announce@lists.mbsi.ca Cc: hsflinux-announce@lists.mbsi.ca, hcflinux-announce@lists.mbsi.ca Message-ID: <20021011003849.GC31233@endlich.mbsi.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.1i X-BeenThere: riptide-announce@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk Reply-To: marc+riptide@mbsi.ca Date: Fri, 11 Oct 2002 02:38:49 +0200 Subject: [riptide] [riptide-announce] New riptide-0.4mbsibeta02101000 linux driver release Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hi, A new experimental version of the open-source Conexant (Rockwell) RipTide Audio/Communication Controller driver for Linux is now available from http://www.mbsi.ca/cnxtlindrv This release provides pre-compiled binaries for RedHat 8.0 and Mandrake 9.0. An important bug has also been fixed. Keep in mind however that the driver is still very preliminary. Nonetheless we recommend that all users of the previous version upgrade. A detailed list of changes is available below. Please report any new or persisting problems. Cheers Marc PS: Archived copies of previous releases are available via a link located at the bottom of the main download page. Thu Oct 10 2002 Marc Boucher * Released riptide-0.4mbsibeta02101000. Thu Oct 10 2002 Marc Boucher * makefile: added RedHat 8.0 linux-2.4.18-14 kernel. * makefile: added Mandrake 9.0 linux-2.4.19-16mdk kernel and removed obsolete SuSE 2.4.4-4GB kernel. * modules/kernelcompiler.sh: added gcc-2.96 (for Mandrake 9) and RPM_BUILD_ROOT support. Sun Sep 29 2002 Marc Boucher * makefile: tardist: changed way tar.gz files are generated to avoid gzip "decompression OK, trailing garbage ignored" messages. Wed Sep 18 2002 Marc Boucher * rt_hw.c:RipTideCreateChannel(): initialize pChannelInfo->sgdList to NULL. (Thanks to nokos@gmx.net for this fix) Sun Sep 01 2002 Marc Boucher * Released riptide-0.4mbsibeta02090100. Sun Sep 01 2002 Marc Boucher * modules/riptidem.c: rt_poll(): finally implemented! Debug msgs gone. Driver should now work with desktop audio daemons, such as KDE's artsd. * modules/riptidem.c: rt_read_dsp(), rt_write_dsp(): don't sleep if O_NONBLOCK. * scripts/ripconfig.in: added extra /etc/modules.conf aliases for automatic devfs module loading. * makefile: added Mandrake 2.4.18-8.1mdk kernel. * makefile: added RedHat 2.4.9-34, 2.4.18-5, and 2.4.18-10 kernels. * Added modules/kernelcompiler.sh, a small script which tries to guess which compiler should be used to build kernel modules. * modules/common.mak: use kernelcompiler.sh to determine default CC * modules/common.mak, INSTALL: added notes about KERNELSRC for Debian 3.0 users. Wed Jun 12 2002 Marc Boucher * Released riptide-0.3mbsibeta02061200. Wed Jun 12 2002 Marc Boucher * scripts/ripconfig.in: dynamically allocate sound-slot-N alias names. * modules/rt_mdl.c: do not request_region() for hwIOSynth as it conflicts with opl3 module. * modules/: silenced some debugging messages. Tue Jun 11 2002 Marc Boucher * Initial beta version (riptide-0.3mbsibeta02061100). _______________________________________________ riptide-announce mailing list riptide-announce@lists.mbsi.ca https://www.mbsi.ca/mailman/listinfo/riptide-announce From marc@mbsi.ca Sat Oct 12 07:28:57 2002 Received: from endlich.mbsi.ca (endlich.mbsi.ca [198.168.101.5]) by valve.mbsi.ca with ESMTP id g9CBSrKw027808 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=FAIL); Sat, 12 Oct 2002 07:28:57 -0400 Received: from endlich.mbsi.ca (endlich.mbsi.ca [127.0.0.1]) by endlich.mbsi.ca with ESMTP id g9CBSmDO014652 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO); Sat, 12 Oct 2002 13:28:48 +0200 Received: (from marc@localhost) by endlich.mbsi.ca (8.12.5/8.12.5/Submit) id g9CBSkBn014651; Sat, 12 Oct 2002 13:28:46 +0200 Date: Sat, 12 Oct 2002 13:28:46 +0200 From: Marc Boucher To: Steve C Cc: hsflinux@lists.mbsi.ca, hcflinux@lists.mbsi.ca, riptide@lists.mbsi.ca Message-ID: <20021012112846.GA14631@endlich.mbsi.ca> References: <20021011164308.GA12020@endlich.mbsi.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20021011164308.GA12020@endlich.mbsi.ca> User-Agent: Mutt/1.5.1i Subject: [riptide] Re: Red Hat 8.0 gcc problem Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Updated HSF, HCF and RIPTIDE packages for RedHat 8.0 (2.4.18-14 kernel) are now available from the web-site (02101001 version). Cheers Marc On Fri, Oct 11, 2002 at 06:43:08PM +0200, Marc Boucher wrote: > Yes, known problem, will be fixed in next release (today or tomorrow). > > Marc > > On Sat, Oct 12, 2002 at 12:33:49AM +0800, Steve C wrote: > > Marc, > > I have successfully used the hsf drivers with Red Hat 7.3 > > > > On Red Hat 8.0 with the 2.4.18_14 athlon drivers > > 'modprobe hsfserial' reports: > > "module is compiled with gcc version 2 > > kernel is compiled with gcc version 3 > > This is known not to work." > > > > Regards > > Steve > > __________________________________________________ > > Do you Yahoo!? > > Faith Hill - Exclusive Performances, Videos & More > > http://faith.yahoo.com > > From riptide-announce-admin@lists.mbsi.ca Mon Nov 4 09:39:03 2002 Received: from valve.mbsi.ca (localhost.mbsi.ca [127.0.0.1]) by valve.mbsi.ca with ESMTP id gA4Ed27F019248; Mon, 4 Nov 2002 09:39:03 -0500 Received: from endlich.mbsi.ca (endlich.mbsi.ca [198.168.101.5]) by valve.mbsi.ca with ESMTP id gA4Ecl7G019241 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=FAIL) for ; Mon, 4 Nov 2002 09:38:48 -0500 Received: from endlich.mbsi.ca (endlich.mbsi.ca [127.0.0.1]) by endlich.mbsi.ca with ESMTP id gA4Eckon030759 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO) for ; Mon, 4 Nov 2002 09:38:46 -0500 Received: (from marc@localhost) by endlich.mbsi.ca (8.12.5/8.12.5/Submit) id gA4EcjlN030758 for riptide-announce@lists.mbsi.ca; Mon, 4 Nov 2002 09:38:45 -0500 From: Marc Boucher To: riptide-announce@lists.mbsi.ca Message-ID: <20021104143845.GA30733@endlich.mbsi.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.1i X-BeenThere: riptide-announce@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk Reply-To: marc+riptide@mbsi.ca Date: Mon, 4 Nov 2002 09:38:45 -0500 Subject: [riptide] [riptide-announce] New riptide-0.4mbsibeta02110301 linux driver release Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hi, A new experimental version of the open-source Conexant (Rockwell) RipTide Audio/Communication Controller driver for Linux is now available from http://www.mbsi.ca/cnxtlindrv This release provides pre-compiled binaries for SuSE 8.1 and the latest RedHat update kernels. A module configuration issue on Gentoo was also fixed. A detailed list of changes is available below. Please report any new or persisting problems. Cheers Marc PS: Archived copies of previous releases are available via a link located at the bottom of the main download page. Sun Nov 03 2002 Marc Boucher * Released riptide-0.4mbsibeta02110301. Sun Nov 03 2002 Marc Boucher * modules/kernelcompiler.sh: use gcc 3 to build modules for SuSE's 2.4.19-4GB kernel. Sun Nov 03 2002 Marc Boucher * Released riptide-0.4mbsibeta02110300. Sun Nov 03 2002 Marc Boucher * makefile: added RedHat 2.4.18-17.7.x and 2.4.18-17.8.0 kernels. * makefile: added SuSE 2.4.19-4GB kernel. * modules/kernelcompiler.sh: use gcc 3 to build modules for RedHat's 2.4.18-17.8.0 kernel. * scripts/ripconfig.in: put module configuration in /etc/modules.d and run update-modules if present (for gentoo). Fri Oct 11 2002 Marc Boucher * Released riptide-0.4mbsibeta02101001. Fri Oct 11 2002 Marc Boucher * modules/kernelcompiler.sh: use gcc 3 to build modules for RedHat's 2.4.18-14 kernel. Thu Oct 10 2002 Marc Boucher * Released riptide-0.4mbsibeta02101000. Thu Oct 10 2002 Marc Boucher * makefile: added RedHat 8.0 linux-2.4.18-14 kernel. * makefile: added Mandrake 9.0 linux-2.4.19-16mdk kernel and removed obsolete SuSE 2.4.4-4GB kernel. * modules/kernelcompiler.sh: added gcc-2.96 (for Mandrake 9) and RPM_BUILD_ROOT support. Sun Sep 29 2002 Marc Boucher * makefile: tardist: changed way tar.gz files are generated to avoid gzip "decompression OK, trailing garbage ignored" messages. Wed Sep 18 2002 Marc Boucher * rt_hw.c:RipTideCreateChannel(): initialize pChannelInfo->sgdList to NULL. (Thanks to nokos@gmx.net for this fix) Sun Sep 01 2002 Marc Boucher * Released riptide-0.4mbsibeta02090100. Sun Sep 01 2002 Marc Boucher * modules/riptidem.c: rt_poll(): finally implemented! Debug msgs gone. Driver should now work with desktop audio daemons, such as KDE's artsd. * modules/riptidem.c: rt_read_dsp(), rt_write_dsp(): don't sleep if O_NONBLOCK. * scripts/ripconfig.in: added extra /etc/modules.conf aliases for automatic devfs module loading. * makefile: added Mandrake 2.4.18-8.1mdk kernel. * makefile: added RedHat 2.4.9-34, 2.4.18-5, and 2.4.18-10 kernels. * Added modules/kernelcompiler.sh, a small script which tries to guess which compiler should be used to build kernel modules. * modules/common.mak: use kernelcompiler.sh to determine default CC * modules/common.mak, INSTALL: added notes about KERNELSRC for Debian 3.0 users. Wed Jun 12 2002 Marc Boucher * Released riptide-0.3mbsibeta02061200. Wed Jun 12 2002 Marc Boucher * scripts/ripconfig.in: dynamically allocate sound-slot-N alias names. * modules/rt_mdl.c: do not request_region() for hwIOSynth as it conflicts with opl3 module. * modules/: silenced some debugging messages. Tue Jun 11 2002 Marc Boucher * Initial beta version (riptide-0.3mbsibeta02061100). _______________________________________________ riptide-announce mailing list riptide-announce@lists.mbsi.ca https://www.mbsi.ca/mailman/listinfo/riptide-announce From jpeter20@yahoo.com Tue Nov 5 23:49:02 2002 Received: from web20708.mail.yahoo.com (web20708.mail.yahoo.com [216.136.226.181]) by valve.mbsi.ca with SMTP id gA64n17F030240 for ; Tue, 5 Nov 2002 23:49:02 -0500 Message-ID: <20021106044900.15137.qmail@web20708.mail.yahoo.com> Received: from [68.42.157.25] by web20708.mail.yahoo.com via HTTP; Tue, 05 Nov 2002 20:49:00 PST Date: Tue, 5 Nov 2002 20:49:00 -0800 (PST) From: James Petersen To: riptide@lists.mbsi.ca MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [riptide] Install problems on SuSE 8.0 Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hello to all, Is anyone having success installing the Riptide drivers on an HSF 127A:4311, with the 2.4.18-4GB SuSE 8.0 kernel? I'm getting depmod errors which seem the same as the last time I tried to install the Riptide beta drivers, which was probably about 4 months ago. I'm wondering if the riptide RPM actually has some dependencies that weren't programmed into the RPM dependency list... Maybe all I need to do is install some package from SuSE first, to provide the missing symbols? Here are the errors: #ripconfig Linux RIPTIDE audio/communication drivers, version 0.4mbsibeta02110300 WARNING: this is an EXPERIMENTAL BETA VERSION of the RIPTIDE drivers for Linux. USE AT YOUR OWN RISK! See the file /usr/lib/riptide/LICENSE for details. Conexant Systems neither distributes nor maintains this package. PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!! If you require assistance or need more information, go to: http://www.mbsi.ca/cnxtlindrv Warning: existing RIPTIDE modules found under /lib/modules/2.4.18-4GB/misc/ Would you like to keep using them? [no] Pre-built RIPTIDE modules that seem compatible with your system were found under /usr/lib/riptide/modules/binaries/i686/SuSE/linux-2.4.18-4GB. Would you like to use them? [yes] depmod: *** Unresolved symbols in /usr/lib/riptide/modules/binaries/i386/SuSE/linux-2.4.18-4GB/riptideint.o depmod: kmap_pagetable depmod: *** Unresolved symbols in /usr/lib/riptide/modules/binaries/i386/SuSE/linux-2.4.18-4GB/riptidelow.o depmod: kmap_pagetable depmod: *** Unresolved symbols in /usr/lib/riptide/modules/binaries/i386/SuSE/linux-2.4.18-4GB/riptidesound.o depmod: kmap_pagetable RIPTIDE module configuration completed. --------------------------------------------- To begin, I downloaded then installed the RPM with the simple rpm install command, using the prebuilt SuSE 2.4.18-4GB RPM's. I first installed the hsflinmodem RPM, which seemed to install without any errors, then installed the riptide RPM. Thanks for any suggestions you may be able to provide on how you solved these errors. --Jim Petersen __________________________________________________ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/ From webfeind2000@hotmail.com Wed Nov 6 09:35:07 2002 Received: from hotmail.com (f70.law10.hotmail.com [64.4.15.70]) by valve.mbsi.ca with ESMTP id gA6EZ77F012953 for ; Wed, 6 Nov 2002 09:35:07 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 6 Nov 2002 06:35:01 -0800 Received: from 65.58.237.175 by lw10fd.law10.hotmail.msn.com with HTTP; Wed, 06 Nov 2002 14:35:00 GMT X-Originating-IP: [65.58.237.175] From: "Bradley Schlangen" To: riptide@lists.mbsi.ca Date: Wed, 06 Nov 2002 09:35:00 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 06 Nov 2002 14:35:01.0100 (UTC) FILETIME=[B0215AC0:01C285A1] Subject: [riptide] (no subject) Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hello, I'm responding to the following posting I experienced the same problems with Mandrake 9.0 using the prebuilt rpm's for same kernel version as yours. I can get the sound to work by stopping the arts deamon then exiting X11. As root remove the old riptide driver rpm -e riptide then reinstall rpm -i riptide**.rpm. Do not use the prebuilt librarys and use the lib's provided in the rpm. Go back into KDE and reinit the arts deamon. This may or maynot work I had to do several cycles of that to get results from arts although oss + esd operated fine without dificulties. T his isn't permanent after I rebooted the sound was gone. Had to redo the whole proccess. I degraded my kernal version back to 2.4.18-16mdk and I had non of the problems mentioned. Just a bit of useless info, Brad.S >David Veksler capt_david@hotmail.com Fri, 04 Oct 2002 15:50:46 -0500 > >Hi, > >I am unable to get my Conexant Riptide audio card to work, and I was >wondering if someone on this listserv could help me out. > >I downloaded the source for the .4 audio driver and compiled it for my >Mandrake 9 2.4.19 kernel. It installed successfully, and without any >errors, and I can see the mixer, and turn up the mike gain volume till >I >hear audio fedback, however when I try to initialize aRts, it >fails >"unable to initiallize io" and I lose my mixer- the same thing >happens >when I try to run aRts on startup. > >I am also unable to play any audio in any of the media players I >tried. > >Anyone have any ideas? I included the beggining of my dump file, and >will >send the whole thing to anyone who wants to take a look(Please >refer to >the 2002-October Archives). > > >Also, when I run ripstop I get: >riptidelow: Device or resource busy >re-running ripconfig recomiples and installs without any error however. > > >Thanks, >--David _________________________________________________________________ Add photos to your messages with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail From otacontv@yahoo.com Fri Nov 8 14:19:54 2002 Received: from web21007.mail.yahoo.com (web21007.mail.yahoo.com [216.136.227.61]) by valve.mbsi.ca with SMTP id gA8JJr7F013008 for ; Fri, 8 Nov 2002 14:19:53 -0500 Message-ID: <20021108191952.64641.qmail@web21007.mail.yahoo.com> Received: from [206.78.126.230] by web21007.mail.yahoo.com via HTTP; Fri, 08 Nov 2002 11:19:52 PST Date: Fri, 8 Nov 2002 11:19:52 -0800 (PST) From: Tom Veatch To: riptide@lists.mbsi.ca MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [riptide] Drivers not working Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: I have a Riptide modem/sound combo card. I installed both drivers for it in SuSE linux and it seemed to install fine but it still doesn't detect the modem or sound. I remember that it said the modem was on dev/ttyshcfo. I tried to set up the dialer but it doesn't detect the modem still. I tried the RPM's but I didn't think it worked so I used the tar files. Any suggestions? Thanks in advance :) __________________________________________________ Do you Yahoo!? U2 on LAUNCH - Exclusive greatest hits videos http://launch.yahoo.com/u2 From root@dhferrarotto.roma1.infn.it Thu Nov 14 13:34:05 2002 Received: from dhferrarotto.roma1.infn.it (dhferrarotto.roma1.infn.it [141.108.28.17]) by valve.mbsi.ca with ESMTP id gAEIY4Er027784 for ; Thu, 14 Nov 2002 13:34:05 -0500 Received: from localhost (localhost [[UNIX: localhost]]) by dhferrarotto.roma1.infn.it (8.11.6/8.11.6) id gAEIXxi03496 for riptide@lists.mbsi.ca; Thu, 14 Nov 2002 19:33:59 +0100 Content-Type: text/plain; charset="iso-8859-1" From: root To: riptide@lists.mbsi.ca Date: Thu, 14 Nov 2002 19:33:59 +0100 User-Agent: KMail/1.4.1 MIME-Version: 1.0 Message-Id: <200211141933.59322.root@dhferrarotto.roma1.infn.it> Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by valve.mbsi.ca id gAEIY4Er027784 Subject: [riptide] modem install on some vaio models Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: I successfully installed and used Conextant HSF linmodem rpm packages in the following cases : SONY VAIO PCG-FX215 (both RH 7.1 and RH 7.3) SONY VAIO PCG-FXA49 (RH7.3 only tested) Both are Duron/Athlon machines , so you've got to get the correct athlon .rpm file for both cases. Conextant driver seems to work also if you get only the modem identified as AC97 (VIA 1106:3068* - VIA MC97 controller for AC-Link modems) Good luck everybody else Cheers Fabio Ferrarotto From perturbed@subdimension.com Sat Nov 16 09:29:03 2002 Received: from smtp02.iprimus.net.au (smtp02.iprimus.net.au [210.50.76.70]) by valve.mbsi.ca with ESMTP id gAGET0oI031432 for ; Sat, 16 Nov 2002 09:29:02 -0500 Received: from subdimension.com ([210.50.109.85]) by smtp02.iprimus.net.au with Microsoft SMTPSVC(5.0.2195.5600); Sun, 17 Nov 2002 01:28:50 +1100 Message-ID: <3DD65702.1050209@subdimension.com> Date: Sat, 16 Nov 2002 22:32:34 +0800 From: Clark Bang User-Agent: Mozilla/5.0 (X11; U; Linux 2.4.5 i686; en-US; rv:0.9.1) Gecko/20010610 X-Accept-Language: en-us MIME-Version: 1.0 To: riptide@lists.mbsi.ca Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 16 Nov 2002 14:28:54.0489 (UTC) FILETIME=[7DBE7490:01C28D7C] Subject: [riptide] Riptide and HSf modem coexistance?? Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: Hello, has anyone gotten both the riptide and the modem to work at the same time? and that means not listening to the modem sounds but being able to play mp3s while dialed up on the net? my chipset is 127a:4311 cheers clark From cust_service@net-submissions.net Fri Dec 6 07:12:43 2002 Received: from 65.94.125.34 ([200.33.39.101]) by valve.mbsi.ca with SMTP id gB6CCJO4025752 for ; Fri, 6 Dec 2002 07:12:40 -0500 Received: from [70.36.128.24] by 65.94.125.34; Fri, 06 Dec 02 03:56:42 +0400 Received: from [182.74.158.99] by 70.36.128.24; Fri, 06 Dec 02 03:44:42 +0400 From: "Netsubmissions" Message-ID: To: riptide@lists.mbsi.ca Date: Fri, 06 Dec 02 03:44:42 GMT X-Priority: 1 X-MSMail-Priority: High X-Mailer: Microsoft Outlook Express 5.50.4133.2400 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary=WC_MAIL_PaRt_BoUnDaRy_05151998 Subject: [riptide] Increase Profit from your website (ADV) Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: This is a multi-part message in MIME format. --WC_MAIL_PaRt_BoUnDaRy_05151998 Content-Type: text/plain Content-Transfer-Encoding: 7Bit Hello, My name is Jane and I am the marketing director of Netsubmissions.net. If this email was an inconvenience to you,I would like to apologize. We are a website submission company that can submit your site to the top search engines such as Google and Lycos utilizing our proprietary custom software. Our packages start as low as $8.99 and we're offering great articles about online marketing with most of the packages. Please check us out at http://www.net-submissions.net The process takes less than 2 minutes. Check our web site - we will help you obtain more sales. If you have any questions that are not answered at http://www.net-submissions.net please use the contact form or email me. Once again, I would like to thank you for your time, and once again if this email was an inconvenience to you, I would like to apologize. If you would like to be removed from our mailing list, please type "Remove"on the subject and we will make sure to not send you any more emails. Have a Nice day. Thank You, Jane L. Marketing Director cust_service@net-submissions.net Http://www.net-submissions.com --WC_MAIL_PaRt_BoUnDaRy_05151998-- From Vectormode2003@yahoo.com Sat Dec 7 09:15:37 2002 Received: from mail.mbsi.ca (pcp01769534pcs.audubn01.nj.comcast.net [68.46.167.173]) by valve.mbsi.ca with SMTP id gB7EFaO4010285 for ; Sat, 7 Dec 2002 09:15:36 -0500 Message-Id: <200212071415.gB7EFaO4010285@valve.mbsi.ca> From: "Vectormode2003@yahoo.com" Date: Sat, 07 Dec 2002 09:15:36 To: riptide@lists.mbsi.ca MIME-Version: 1.0 Content-Type: text/plain;charset="iso-8859-1" Content-Transfer-Encoding: 7bit Subject: [riptide] Some one cares for you Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: This is not Spam, as you can see at the bottom of my letter. I was given your email address by one of your friends, family, co-workers, and/or neighbors. Hi my name is Stephen Dimuzio, Are you looking to start working out of your home? Or looking to supplement your income? Or are you looking to work part-time, spare-time, even full-time, or maybe even start your home-based business? Do you need to start earning money today? But, not necessarily sure what is available or which companies have programs for working at home. Learn how you can set your own hours. Work as little as you want, or as much as you can. Find out about opportunities to earn just a few hundred per week or several thousand per week. You can even work for several companies at once! Best of all, 99% or more of the opportunities are national. That means you can live anywhere in the U.S. and still be able to work for any of these companies! Make 50k + a year from your home. Put your kids through school! Pay off bills! Avoid Bankruptcy! To order the "Work From Your Home Guide" it costs you $19.95, shipping included. Just send check or money order with your return postal address to: Stephen Dimuzio 7204 Bishop View Cr. Cherry Hill , NJ 08002 In your letter, can you please write 10-email address of your friends, family, co-workers and/or neighbors? That you think this program may help. You and Your Family Will Thank Me. From davis@guydavis.ca Wed Dec 11 22:36:19 2002 Received: from dhcp11.int.guydavis.ca (h68-146-142-202.cg.shawcable.net [68.146.142.202]) by valve.mbsi.ca with ESMTP id gBC3a5O5031821 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO) for ; Wed, 11 Dec 2002 22:36:07 -0500 Received: from dhcp11.int.guydavis.ca (localhost.localdomain [127.0.0.1]) by dhcp11.int.guydavis.ca (8.12.5/8.12.5) with ESMTP id gBC3Zu9L002099 for ; Wed, 11 Dec 2002 20:35:56 -0700 Received: (from davis@localhost) by dhcp11.int.guydavis.ca (8.12.5/8.12.5/Submit) id gBC3Ztu7002097; Wed, 11 Dec 2002 20:35:55 -0700 X-Authentication-Warning: dhcp11.int.guydavis.ca: davis set sender to davis@guydavis.ca using -f From: Guy Davis To: riptide@lists.mbsi.ca Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="=-Ss1Pa/NoMw4jSwD6Flew" X-Mailer: Ximian Evolution 1.0.8 (1.0.8-10) Date: 11 Dec 2002 20:35:55 -0700 Message-Id: <1039664155.1477.17.camel@dhcp11.int.guydavis.ca> Mime-Version: 1.0 Subject: [riptide] Trouble with sound on RH 8.0 system? Sender: riptide-admin@lists.mbsi.ca Errors-To: riptide-admin@lists.mbsi.ca X-BeenThere: riptide@lists.mbsi.ca X-Mailman-Version: 2.0.13 Precedence: bulk List-Help: List-Post: List-Subscribe: , List-Id: Linux RipTide driver discussion list List-Unsubscribe: , List-Archive: --=-Ss1Pa/NoMw4jSwD6Flew Content-Type: multipart/mixed; boundary="=-/PlSbuOicJ6JkLqR8v9x" --=-/PlSbuOicJ6JkLqR8v9x Content-Type: text/plain Content-Transfer-Encoding: quoted-printable Thanks for the drivers. Following your instructions, I was able to get the modem working with the HCF driver. However, I am unable to get sound to work. Here's the relevant info: I installed hcfpcimodem-0.98mbsibeta02110300k2.4.18_14-1rh.i586.rpm and riptide-0.4mbsibeta02110300k2.4.18_14-1rh.i586.rpm. I am using the following kernel:=20 [root@dhcp17 root]# uname -r 2.4.18-14 Both sndconfig and the new GUI sound configuration app under RH 8 report no working module found when I try to play a test sound. I can't get XMMS to do anything but hang when trying to play MP3s. ****** Here's the /etc/modules.conf ******* alias parport_lowlevel parport_pc alias eth0 tulip alias usb-controller usb-ohci alias /dev/ttySHCF[0-9]* hcfpciserial alias char-major-240 hcfpciserial alias /dev/cuaHCF[0-9]* hcfpciserial alias char-major-241 hcfpciserial alias /dev/modem hcfpciserial options hcfpciserial serialmajor=3D240 calloutmajor=3D241 pcivendorid=3D0x1= 27A pcideviceid=3D0x4321 below hcfpciserial riptidelow alias sound-slot-0 riptidelow alias /dev/dsp* riptidelow alias /dev/sound/dsp* riptidelow alias /dev/mixer* riptidelow alias /dev/sound/mixer* riptidelow alias /dev/ttySHCF[0-9]* hcfpciserial alias /dev/cuaHCF[0-9]* hcfpciserial alias /dev/dsp* riptidelow alias /dev/sound/dsp* riptidelow alias /dev/mixer* riptidelow alias /dev/sound/mixer* riptidelow ******* FROM /var/log/messages after boot ************ Dec 11 20:07:18 dhcp17 kernel: Conexant Sound Driver v0.4mbsibeta02110300 t= ime 22:38:43 Nov 3 2002 Dec 11 20:07:18 dhcp17 kernel: Init_module is completed Dec 11 20:07:18 dhcp17 kernel: version v0.4mbsibeta02110300 time 22= :38:27 Nov 3 2002 Dec 11 20:07:18 dhcp17 kernel: Look for 127a 4320<6>PCI: Found IRQ = 11 for device 00:0c.0 Dec 11 20:07:18 dhcp17 kernel: PCI: Sharing IRQ 11 with 00:00.1 Dec 11 20:07:18 dhcp17 kernel: PCI: Sharing IRQ 11 with 00:01.2 Dec 11 20:07:18 dhcp17 kernel: PCI: Sharing IRQ 11 with 00:0c.1 Dec 11 20:07:18 dhcp17 kernel: - found at io 1800 irq 11 Dec 11 20:07:18 dhcp17 kernel: Start allocation of resources: caf51= 920 Dec 11 20:07:18 dhcp17 kernel: Register hardware caf51920 Dec 11 20:07:18 dhcp17 kernel: register is successful Dec 11 20:07:18 dhcp17 kernel: Resources are allocated: io 0x1800 i= rq 11 Dec 11 20:07:18 dhcp17 kernel: Init command interface: 1800 b ce901= 340 Dec 11 20:07:18 dhcp17 kernel: RipTide version before: Dec 11 20:07:18 dhcp17 kernel: ASIC : 3 Dec 11 20:07:18 dhcp17 kernel: CODEC : 2 Dec 11 20:07:18 dhcp17 kernel: AUXDSP: 3 Dec 11 20:07:18 dhcp17 kernel: PROG : 773 Dec 11 20:07:18 dhcp17 kernel: Firmware size: 15597 Dec 11 20:07:18 dhcp17 kernel: Start RiptideLoadImage Dec 11 20:07:18 dhcp17 kernel: Firmware is loaded. Dec 11 20:07:18 dhcp17 kernel: RipTide version after: Dec 11 20:07:18 dhcp17 kernel: ASIC : 3 Dec 11 20:07:18 dhcp17 kernel: CODEC : 2 Dec 11 20:07:18 dhcp17 kernel: AUXDSP: 3 Dec 11 20:07:18 dhcp17 insmod: Warning: loading /usr/lib/riptide/modules/bi= naries/i586/RedHat/linux-2.4.18-14/riptideint.o will taint the kernel: non-= GPL license - Copyright (C) 1995-2002 Conexant Systems Inc. All Rights Rese= rved. Dec 11 20:07:19 dhcp17 kernel: PROG : 773 Dec 11 20:07:19 dhcp17 insmod: See http://www.tux.org/lkml/#export-tainte= d for information about tainted modules Dec 11 20:07:19 dhcp17 kernel: requesting io ports 0x1800-0x183f Dec 11 20:07:19 dhcp17 insmod: Module riptideint loaded, with warnings Dec 11 20:07:19 dhcp17 kernel: Init command riptide: 1800 b ce90134= 0 cce61ea0 ce8d5a90 cce61e30 Dec 11 20:07:19 dhcp17 insmod: Module sound loaded, with warnings Dec 11 20:07:19 dhcp17 kernel: riptide FM at io ports 0x388-0x38b Dec 11 20:07:19 dhcp17 insmod: Module mpu401 loaded, with warnings Dec 11 20:07:20 dhcp17 kernel: Init_module is completed: index =3D = 0 Dec 11 20:07:20 dhcp17 insmod: Module opl3 loaded, with warnings Dec 11 20:07:20 dhcp17 insmod: Warning: loading /usr/lib/riptide/modules/bi= naries/i586/RedHat/linux-2.4.18-14/riptidesound.o will taint the kernel: no= n-GPL license - Copyright (C) 1995-2002 Conexant Systems Inc. All Rights Re= served. Dec 11 20:07:20 dhcp17 insmod: Module riptidesound loaded, with warnings Dec 11 20:07:20 dhcp17 insmod: Warning: loading /usr/lib/riptide/modules/bi= naries/i586/RedHat/linux-2.4.18-14/riptidelow.o will taint the kernel: non-= GPL license - Copyright (C) 1995-2002 Conexant Systems Inc. All Rights Rese= rved. Dec 11 20:07:20 dhcp17 insmod: Module riptidelow loaded, with warnings Dec 11 20:07:20 dhcp17 modprobe: modprobe: Can't locate module sound-servic= e-0-3 ******* Result of listmodem.sh ********** [root@dhcp17 root]# ./listmodem.sh =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D RESULT OF MODEM QUERY =3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D MODEM #1: PCI CONFIGURATION INFORMATION READ: Vendor Id : 127A Device Id : 4321 Revision Id : NONE Sub Vendor Id : 1235 Sub Device Id : 4321 DEDUCED INFORMATION: Vendor Name : CONEXANT Modem Type : Unknown communication device ATTENTION: An Unknown Conexant communication device (Modem) was detected. You can download and install the Conexant driver, check if it works with your current modem device. You may need to configure your Vendor ID and Device ID manually (see INSTALL file). Download Site : http://www.mbsi.ca/cnxtlindrv/ I would really appreciate any ideas on how to resolve this problem. Thanks. I attached the output of ripconfig -d. --=20 Guy Davis http://www.guydavis.ca Calgary, Alberta, Canada Digitally signed by GnuPG (DSA ID 30D52F0B at www.keyserver.net) PGP Fingerprint: 8DC8 4A6F C1AD 393B 39DB CDBF 196D 31D0 30D5 2F0B --=-/PlSbuOicJ6JkLqR8v9x Content-Disposition: attachment; filename=ripdiag.txt Content-Type: text/plain; name=ripdiag.txt; charset=UTF-8 Content-Transfer-Encoding: quoted-printable + date Wed Dec 11 20:31:19 MST 2002 + ripconfig --version 0.4mbsibeta02110300 linux-i586(i586)-2.4.18-14-MODVERS RedHat-8.0 + uname -a Linux dhcp17.int.guydavis.ca 2.4.18-14 #1 Wed Sep 4 11:57:57 EDT 2002 i586 = i586 i386 GNU/Linux + cat /proc/version Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version= 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57 EDT 2002 + cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 5 model : 8 model name : AMD-K6(tm) 3D processor stepping : 12 cpu MHz : 350.013 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr bogomips : 697.95 + lspci -n 00:00.0 Class 0600: 1039:0530 (rev 02) 00:00.1 Class 0101: 1039:5513 (rev d0) 00:01.0 Class 0601: 1039:0008 (rev b1) 00:01.1 Class ff00: 1039:0009 00:01.2 Class 0c03: 1039:7001 (rev 11) 00:02.0 Class 0604: 1039:0001 00:0a.0 Class 0300: 121a:0005 (rev 01) 00:0b.0 Class 0200: 10d9:0531 (rev 25) 00:0c.0 Class 0401: 127a:4320 00:0c.1 Class 0780: 127a:4321 00:0c.2 Class 0980: 127a:4322 01:00.0 Class 0300: 1039:6306 (rev a2) + lspci -n -vvv 00:00.0 Class 0600: 1039:0530 (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- SERR- 00:00.1 Class 0101: 1039:5513 (rev d0) (prog-if 8a [Master SecP PriP]) Subsystem: 1039:5513 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:0a.0 Class 0300: 121a:0005 (rev 01) Subsystem: 121a:0036 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dfast >TAbort- SERR- [disabled] [size=3D64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col= d-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 00:0b.0 Class 0200: 10d9:0531 (rev 25) Subsystem: 15e8:8110 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- [disabled] [size=3D256K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=3D0mA PME(D0-,D1+,D2+,D3hot+,D3col= d+) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- 00:0c.0 Class 0401: 127a:4320 Subsystem: 1235:4320 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Steppi= ng- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=3Dmedium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- [disabled] [size=3D32K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=3D0mA PME(D0-,D1-,D2-,D3hot-,D3col= d-) Status: D0 PME-Enable- DSel=3D0 DScale=3D0 PME- Capabilities: [50] AGP version 1.0 Status: RQ=3D1 SBA- 64bit- FW- Rate=3Dx1,x2 Command: RQ=3D0 SBA- AGP- 64bit- FW- Rate=3D + cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: Silicon Integrated Systems [SiS] 530 Host (rev 2). Master Capable. Latency=3D32. =20 Non-prefetchable 32 bit memory at 0xf4000000 [0xf7ffffff]. Bus 0, device 0, function 1: IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 208). IRQ 11. Master Capable. Latency=3D64. =20 I/O at 0x1840 [0x184f]. Bus 0, device 1, function 0: ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 177). Bus 0, device 1, function 1: Class ff00: Silicon Integrated Systems [SiS] ACPI (rev 0). Bus 0, device 1, function 2: USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 17). IRQ 11. Master Capable. Latency=3D64. Max Lat=3D80. Non-prefetchable 32 bit memory at 0xfa010000 [0xfa010fff]. Bus 0, device 2, function 0: PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0). Master Capable. No bursts. Min Gnt=3D4. Bus 0, device 10, function 0: VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1). IRQ 9. Non-prefetchable 32 bit memory at 0xf8000000 [0xf9ffffff]. Prefetchable 32 bit memory at 0xfc000000 [0xfdffffff]. I/O at 0x1000 [0x10ff]. Bus 0, device 11, function 0: Ethernet controller: Macronix, Inc. [MXIC] MX987x5 (rev 37). IRQ 10. Master Capable. Latency=3D66. Min Gnt=3D8.Max Lat=3D56. I/O at 0x1400 [0x14ff]. Non-prefetchable 32 bit memory at 0xfa012000 [0xfa0120ff]. Bus 0, device 12, function 0: Multimedia audio controller: Rockwell International Riptide PCI Audio C= ontroller (rev 0). IRQ 11. Master Capable. Latency=3D64. =20 I/O at 0x1800 [0x183f]. Bus 0, device 12, function 1: Communication controller: Rockwell International Riptide HCF 56k PCI Mo= dem (rev 0). IRQ 11. Master Capable. Latency=3D64. =20 Non-prefetchable 32 bit memory at 0xfa000000 [0xfa00ffff]. Bus 0, device 12, function 2: Input device controller: Rockwell International Riptide PCI Game Contro= ller (rev 0). Non-prefetchable 32 bit memory at 0xfa011000 [0xfa011fff]. Bus 1, device 0, function 0: VGA compatible controller: Silicon Integrated Systems [SiS] 6306 3D-AGP= (rev 162). IRQ 11. Master Capable. Latency=3D64. Min Gnt=3D2. Prefetchable 32 bit memory at 0xfa800000 [0xfaffffff]. Non-prefetchable 32 bit memory at 0xfa100000 [0xfa10ffff]. I/O at 0x9000 [0x907f]. + cat /proc/cmdline ro root=3DLABEL=3D/ + cat /proc/uptime 1578.26 1416.43 + cat /proc/devices Character devices: 1 mem 2 pty 3 ttyp 4 ttyS 5 cua 7 vcs 10 misc 13 input 14 sound 29 fb 36 netlink 119 vmnet 128 ptm 129 ptm 136 pts 137 pts 162 raw 180 usb Block devices: 1 ramdisk 2 fd 3 ide0 9 md 12 unnamed 14 unnamed 22 ide1 38 unnamed 39 unnamed + cat /proc/misc 165 vmmon 135 rtc 1 psaux 134 apm_bios 25 synth + cat /proc/filesystems nodev rootfs nodev bdev nodev proc nodev sockfs nodev tmpfs nodev shm nodev pipefs ext2 nodev ramfs iso9660 nodev devpts ext3 nodev usbdevfs nodev usbfs nodev autofs + cat /proc/interrupts CPU0 =20 0: 157830 XT-PIC timer 1: 477 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 10: 1519 XT-PIC eth0 11: 0 XT-PIC usb-ohci, riptidesound 12: 15193 XT-PIC PS/2 Mouse 14: 10401 XT-PIC ide0 15: 11457 XT-PIC ide1 NMI: 0=20 ERR: 0 + cat /proc/iomem 00000000-0009f3ff : System RAM 0009f400-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0ddeffff : System RAM 00100000-0022a636 : Kernel code 0022a637-003209c3 : Kernel data 0ddf0000-0ddffbff : ACPI Tables 0ddffc00-0ddfffff : ACPI Non-volatile Storage f4000000-f7ffffff : Silicon Integrated Systems [SiS] 530 Host f8000000-f9ffffff : 3Dfx Interactive, Inc. Voodoo 3 fa000000-fa00ffff : Rockwell International Riptide HCF 56k PCI Modem fa010000-fa010fff : Silicon Integrated Systems [SiS] 7001 fa010000-fa010fff : usb-ohci fa011000-fa011fff : Rockwell International Riptide PCI Game Controller fa012000-fa0120ff : Macronix, Inc. [MXIC] MX987x5 fa012000-fa0120ff : tulip fa100000-fa1fffff : PCI Bus #01 fa100000-fa10ffff : Silicon Integrated Systems [SiS] 6306 3D-AGP fa800000-faffffff : PCI Bus #01 fa800000-faffffff : Silicon Integrated Systems [SiS] 6306 3D-AGP fc000000-fdffffff : 3Dfx Interactive, Inc. Voodoo 3 fff80000-ffffffff : reserved + cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0330-0331 : mpu401 0376-0376 : ide1 0378-037a : parport0 037b-037f : parport0 0388-038b : Yamaha OPL3 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 1000-10ff : 3Dfx Interactive, Inc. Voodoo 3 1400-14ff : Macronix, Inc. [MXIC] MX987x5 1400-14ff : tulip 1800-183f : Rockwell International Riptide PCI Audio Controller 1800-183f : riptide 1840-184f : Silicon Integrated Systems [SiS] 5513 [IDE] 1840-1847 : ide0 1848-184f : ide1 9000-9fff : PCI Bus #01 9000-907f : Silicon Integrated Systems [SiS] 6306 3D-AGP + cat /proc/dma 4: cascade + cat /proc/mtrr reg00: base=3D0xfc000000 (4032MB), size=3D 32MB: write-combining, count=3D= 1 + cat /proc/modules ide-cd 31432 0 (autoclean) cdrom 30976 0 (autoclean) [ide-cd] riptidelow 21404 1 (autoclean) riptidesound 14480 2 (autoclean) [riptidelow] opl3 14176 0 (autoclean) [riptidelow] mpu401 22692 0 (autoclean) [riptidelow riptidesound] sound 70196 0 (autoclean) [opl3 mpu401] riptideint 8104 1 (autoclean) [riptidelow] soundcore 6180 5 (autoclean) [riptidesound sound] vmnet 25376 6 parport_pc 17604 0 parport 33984 0 [parport_pc] vmmon 24084 0 (unused) autofs 12228 0 (autoclean) (unused) tulip 42304 1 ipt_REJECT 3448 2 (autoclean) iptable_filter 2316 1 (autoclean) ip_tables 14456 2 [ipt_REJECT iptable_filter] mousedev 5236 1 keybdev 2688 0 (unused) hid 20836 0 (unused) input 5664 0 [mousedev keybdev hid] usb-ohci 20360 0 (unused) usbcore 71680 1 [hid usb-ohci] ext3 64224 2 jbd 48180 2 [ext3] + cat /etc/modules.conf alias parport_lowlevel parport_pc alias eth0 tulip alias usb-controller usb-ohci alias /dev/ttySHCF[0-9]* hcfpciserial alias char-major-240 hcfpciserial alias /dev/cuaHCF[0-9]* hcfpciserial alias char-major-241 hcfpciserial alias /dev/modem hcfpciserial options hcfpciserial serialmajor=3D240 calloutmajor=3D241 pcivendorid=3D0x1= 27A pcideviceid=3D0x4321=20 below hcfpciserial riptidelow alias sound-slot-0 riptidelow alias /dev/dsp* riptidelow alias /dev/sound/dsp* riptidelow alias /dev/mixer* riptidelow alias /dev/sound/mixer* riptidelow alias /dev/ttySHCF[0-9]* hcfpciserial alias /dev/cuaHCF[0-9]* hcfpciserial alias /dev/dsp* riptidelow alias /dev/sound/dsp* riptidelow alias /dev/mixer* riptidelow alias /dev/sound/mixer* riptidelow + dmesg Linux version 2.4.18-14 (bhcompile@stripples.devel.redhat.com) (gcc version= 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 11:57:57 EDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ddf0000 (usable) BIOS-e820: 000000000ddf0000 - 000000000ddffc00 (ACPI data) BIOS-e820: 000000000ddffc00 - 000000000de00000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 221MB LOWMEM available. On node 0 totalpages: 56816 zone(0): 4096 pages. zone(1): 52720 pages. zone(2): 0 pages. Kernel command line: ro root=3DLABEL=3D/ Initializing CPU#0 Detected 350.013 MHz processor. Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized Console: colour VGA+ 80x25 Calibrating delay loop... 697.95 BogoMIPS Memory: 219376k/227264k available (1193k kernel code, 5728k reserved, 984k = data, 200k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 4096 (order: 3, 32768 bytes) ramfs: mounted with options: ramfs: max_pages=3D27643 max_file_pages=3D0 max_inodes=3D0 max_dentries=3D2= 7643 Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor =3D 2 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002 CPU: After generic, caps: 008021bf 808029bf 00000000 00000002 CPU: Common caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: AMD K6 PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=3D1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router SIS [1039/0008] at 00:01.0 PCI: Found IRQ 11 for device 00:00.1 PCI: Sharing IRQ 11 with 00:01.2 PCI: Sharing IRQ 11 with 00:0c.0 PCI: Sharing IRQ 11 with 00:0c.1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IR= Q SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq =3D 4) is a 16550A Real Time Clock Driver v1.10e block: 416 slots per queue, batch=3D104 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx SIS5513: IDE controller on PCI bus 00 dev 01 PCI: Found IRQ 11 for device 00:00.1 PCI: Sharing IRQ 11 with 00:01.2 PCI: Sharing IRQ 11 with 00:0c.0 PCI: Sharing IRQ 11 with 00:0c.1 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SiS530 ATA 66 controller ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALL CR8.4A, ATA DISK drive hdc: CRD-8322B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 16514064 sectors (8455 MB) w/418KiB Cache, CHS=3D17475/15/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: [PTBL] [1092/240/63] hda1 hda2 hda3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 125k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 200k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:01.2 PCI: Sharing IRQ 11 with 00:00.1 PCI: Sharing IRQ 11 with 00:0c.0 PCI: Sharing IRQ 11 with 00:0c.1 usb-ohci.c: USB OHCI at membase 0xce844000, IRQ 11 usb-ohci.c: usb-00:01.2, Silicon Integrated Systems [SiS] 7001 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal Adding Swap: 453592k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] ohci1394: pci_module_init failed ip_tables: (C) 2000-2002 Netfilter core team Linux Tulip driver version 0.9.15-pre11 (May 11, 2002) PCI: Found IRQ 10 for device 00:0b.0 tulip0: no phy info, aborting mtable build divert: allocating divert_blk for eth0 eth0: Macronix 98715 PMAC rev 37 at 0xce895000, 00:80:C6:FC:24:D9, IRQ 10. /dev/vmmon: Module vmmon: registered with major=3D10 minor=3D165 tag=3D$Nam= e: build-2230 $ /dev/vmmon: Module vmmon: initialized parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] /dev/vmnet: open called by PID 796 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: up bridge-eth0: attached /dev/vmnet: open called by PID 819 (vmnet-natd) /dev/vmnet: hub 8 does not exist, allocating memory. /dev/vmnet: port on hub 8 successfully opened /dev/vmnet: open called by PID 1190 (vmnet-netifup) /dev/vmnet: hub 1 does not exist, allocating memory. /dev/vmnet: port on hub 1 successfully opened divert: allocating divert_blk for vmnet1 /dev/vmnet: open called by PID 1191 (vmnet-netifup) /dev/vmnet: port on hub 8 successfully opened divert: allocating divert_blk for vmnet8 /dev/vmnet: open called by PID 1229 (vmnet-dhcpd) /dev/vmnet: port on hub 1 successfully opened /dev/vmnet: open called by PID 1231 (vmnet-dhcpd) /dev/vmnet: port on hub 8 successfully opened YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1= 996 Conexant Sound Driver v0.4mbsibeta02110300 time 22:38:43 Nov 3 2002 Init_module is completed version v0.4mbsibeta02110300 time 22:38:27 Nov 3 2002 Look for 127a 4320<6>PCI: Found IRQ 11 for device 00:0c.0 PCI: Sharing IRQ 11 with 00:00.1 PCI: Sharing IRQ 11 with 00:01.2 PCI: Sharing IRQ 11 with 00:0c.1 - found at io 1800 irq 11 Start allocation of resources: caf51920 Register hardware caf51920 register is successful Resources are allocated: io 0x1800 irq 11 Init command interface: 1800 b ce901340 RipTide version before: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 Firmware size: 15597 Start RiptideLoadImage Firmware is loaded. RipTide version after: ASIC : 3 CODEC : 2 AUXDSP: 3 PROG : 773 requesting io ports 0x1800-0x183f Init command riptide: 1800 b ce901340 cce61ea0 ce8d5a90 cce61e30 riptide FM at io ports 0x388-0x38b Init_module is completed: index =3D 0 ide-floppy driver 0.99.newide hdc: ATAPI 32X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 cdrom: This disc doesn't have any tracks I recognize! + depmod -e -a + cat /proc/ksyms ce91a9c0 ide_cdrom_reinit [ide-cd] ce917000 __insmod_ide-cd_O/lib/modules/2.4.18-14/kernel/drivers/ide/ide-cd.= o_M3D763477_V132114 [ide-cd] ce91bbe0 packet_command_texts [ide-cd] ce91bd80 sense_key_texts [ide-cd] ce91ea00 __insmod_ide-cd_S.data_L197 [ide-cd] ce917060 __insmod_ide-cd_S.text_L16200 [ide-cd] ce91ab60 ide_cdrom_init [ide-cd] ce91bdc0 sense_data_texts [ide-cd] ce91eac0 ignore [ide-cd] ce91bbe0 __insmod_ide-cd_S.rodata_L1592 [ide-cd] ce9113d0 cdrom_get_disc_info_R6bc3dbd6 [cdrom] ce911320 cdrom_get_track_info_R6d600868 [cdrom] ce9115a0 cdrom_get_next_writable_R36914bae [cdrom] ce911460 cdrom_get_last_written_R78263467 [cdrom] ce90ee10 cdrom_count_tracks_Re746a53b [cdrom] ce90e060 register_cdrom_R5a61744f [cdrom] ce90e2d0 unregister_cdrom_R703d3575 [cdrom] ce90e3a0 cdrom_open_Ra5e77940 [cdrom] ce90e920 cdrom_release_Ra53effa9 [cdrom] ce90fc60 cdrom_ioctl_R30d6354c [cdrom] ce90edd0 cdrom_media_changed_R0054e9fe [cdrom] ce90eb20 cdrom_number_of_slots_R5d8f3672 [cdrom] ce90ec40 cdrom_select_disc_R8dcbf2fd [cdrom] ce90fa10 cdrom_mode_select_Rcf102018 [cdrom] ce90f9c0 cdrom_mode_sense_R441c9253 [cdrom] ce90f050 init_cdrom_command_Rfacde1b5 [cdrom] ce90e370 cdrom_find_device_R57baf788 [cdrom] ce90e000 __insmod_cdrom_O/lib/modules/2.4.18-14/kernel/drivers/cdrom/cdrom.= o_M3D763475_V132114 [cdrom] ce90e060 __insmod_cdrom_S.text_L16728 [cdrom] ce9138d8 __insmod_cdrom_S.rodata_L1072 [cdrom] ce9152c0 __insmod_cdrom_S.data_L536 [cdrom] ce9154e0 __insmod_cdrom_S.bss_L1056 [cdrom] ce8fc000 __insmod_riptidelow_O/usr/lib/riptide/modules/binaries/i586/RedHat= /linux-2.4.18-14/riptidelow.o_M3DC5EBC4_V132114 [riptidelow] ce8fc060 __insmod_riptidelow_S.text_L14277 [riptidelow] ce8ff840 __insmod_riptidelow_S.rodata_L1008 [riptidelow] ce901260 __insmod_riptidelow_S.data_L84 [riptidelow] ce9012c0 __insmod_riptidelow_S.bss_L220 [riptidelow] ce8f8bf0 cnxt_register_hardware [riptidesound] ce8f8c60 cnxt_unregister_hardware [riptidesound] ce8f7000 __insmod_riptidesound_O/usr/lib/riptide/modules/binaries/i586/RedH= at/linux-2.4.18-14/riptidesound.o_M3DC5EBC4_V132114 [riptidesound] ce8f7060 __insmod_riptidesound_S.text_L9221 [riptidesound] ce8f9540 __insmod_riptidesound_S.rodata_L32 [riptidesound] ce8fa7c0 __insmod_riptidesound_S.data_L200 [riptidesound] ce8fa888 __insmod_riptidesound_S.bss_L8 [riptidesound] ce8f37e0 opl3_init_R1afd20ac [opl3] ce8f2220 opl3_detect_R67481767 [opl3] ce8f2000 __insmod_opl3_O/lib/modules/2.4.18-14/kernel/drivers/sound/opl3.o_= M3D76347C_V132114 [opl3] ce8f2060 __insmod_opl3_S.text_L7624 [opl3] ce8f434c __insmod_opl3_S.rodata_L104 [opl3] ce8f4ba0 __insmod_opl3_S.data_L3000 [opl3] ce8f5758 __insmod_opl3_S.bss_L8 [opl3] ce8ec390 probe_mpu401_Rcd91465c [mpu401] ce8ebd40 attach_mpu401_Re2c3e63d [mpu401] ce8ec420 unload_mpu401_R5febf284 [mpu401] ce8eb480 intchk_mpu401_R5fe6dd42 [mpu401] ce8eb4a0 mpuintr_R57ca69ca [mpu401] ce8eb000 __insmod_mpu401_O/lib/modules/2.4.18-14/kernel/drivers/sound/mpu40= 1.o_M3D76347C_V132114 [mpu401] ce8eb060 __insmod_mpu401_S.text_L8296 [mpu401] ce8ed6e4 __insmod_mpu401_S.rodata_L292 [mpu401] ce8ee6a0 __insmod_mpu401_S.data_L6448 [mpu401] ce8effe0 __insmod_mpu401_S.bss_L2244 [mpu401] ce8e7d58 mixer_devs_R89b2aba6 [sound] ce8e7d40 audio_devs_Re23647e3 [sound] ce8e7d6c num_mixers_R9d845b18 [sound] ce8e7d54 num_audiodevs_R4cd01bdd [sound] ce8e7db0 midi_devs_Rb3ae63d0 [sound] ce8e7dc8 num_midis_Ra1eae7cf [sound] ce8e7d80 synth_devs_R9cc5eb09 [sound] ce8e7dac num_synths_Rbf07ca6e [sound] ce8e76c0 sound_timer_devs_Rb039ee76 [sound] ce8e76d0 num_sound_timers_R98edb1e0 [sound] ce8d8060 sound_install_audiodrv_Rd25afb61 [sound] ce8d8290 sound_install_mixer_Ra2081e33 [sound] ce8d91d0 sound_alloc_dma_R9a95733f [sound] ce8d9260 sound_free_dma_R394cb088 [sound] ce8d9200 sound_open_dma_Rcc4b8797 [sound] ce8d9280 sound_close_dma_R418f5fbe [sound] ce8d8420 sound_alloc_audiodev_R5035736c [sound] ce8d8450 sound_alloc_mididev_Rba413f87 [sound] ce8d84b0 sound_alloc_mixerdev_R1b3df3cf [sound] ce8d84e0 sound_alloc_timerdev_R51e354b2 [sound] ce8d8480 sound_alloc_synthdev_Rc748d109 [sound] ce8d83e0 sound_unload_audiodev_Ra948751e [sound] ce8d8540 sound_unload_mididev_Ra6bb414c [sound] ce8d8510 sound_unload_mixerdev_Ra51c913b [sound] ce8d8590 sound_unload_timerdev_Ra41ead5f [sound] ce8d8570 sound_unload_synthdev_R06339815 [sound] ce8d8640 load_mixer_volumes_Ra1d5f04f [sound] ce8d9320 conf_printf_R0f280035 [sound] ce8d9330 conf_printf2_R7bdf0907 [sound] ce8dc470 DMAbuf_start_dma_Re056b71c [sound] ce8dcd80 DMAbuf_open_dma_R06b3013d [sound] ce8dce30 DMAbuf_close_dma_Rc88b42ab [sound] ce8dcc20 DMAbuf_inputintr_Reb315d99 [sound] ce8dc810 DMAbuf_outputintr_R987bcf12 [sound] ce8da470 dma_ioctl_Rfa21d662 [sound] ce8d9450 audio_open_R88bb9df5 [sound] ce8d96b0 audio_release_R1cb5c116 [sound] ce8dd0d0 do_midi_msg_Rb51587f6 [sound] ce8dd8e0 midi_synth_open_Rf6b3a2fb [sound] ce8dd980 midi_synth_close_Rad45df73 [sound] ce8dd600 midi_synth_ioctl_Rb66d1f67 [sound] ce8dd650 midi_synth_kill_note_R2aa31695 [sound] ce8dd800 midi_synth_start_note_R9bdaf24d [sound] ce8dd790 midi_synth_set_instr_Rd85be938 [sound] ce8dd8d0 midi_synth_reset_R56504ca2 [sound] ce8dd9c0 midi_synth_hw_control_Rb14b22cd [sound] ce8ddbb0 midi_synth_aftertouch_Rf1ea8a20 [sound] ce8ddc50 midi_synth_controller_R892093e0 [sound] ce8ddba0 midi_synth_panning_Rdb400afa [sound] ce8dddd0 midi_synth_setup_voice_R4ff47e9d [sound] ce8ddde0 midi_synth_send_sysex_Rfddcbfb3 [sound] ce8ddd10 midi_synth_bender_Rba7dd041 [sound] ce8dd9d0 midi_synth_load_patch_Rf7426da3 [sound] ce8de7f0 MIDIbuf_avail_R1f395686 [sound] ce8e0f30 note_to_freq_R5d986fc9 [sound] ce8e0f80 compute_finetune_R04c87ec8 [sound] ce8dea10 seq_copy_to_input_R7679ee76 [sound] ce8deb40 seq_input_event_R17ba231d [sound] ce8e10b0 sequencer_init_Rf78f6363 [sound] ce8e0f20 sequencer_timer_R90bd9714 [sound] ce8e18c0 sound_timer_init_R2161d5e8 [sound] ce8e1850 sound_timer_interrupt_Re2675a79 [sound] ce8e1440 sound_timer_syncinterval_Rfa6871be [sound] ce8e13f0 reprogram_timer_Rc68b568e [sound] ce8e7b20 cent_tuning_R03ce7ff7 [sound] ce8e7ae0 semitone_tuning_R8b84aeb1 [sound] ce8d8000 __insmod_sound_O/lib/modules/2.4.18-14/kernel/drivers/sound/sound.= o_M3D76347C_V132114 [sound] ce8d8060 __insmod_sound_S.text_L40266 [sound] ce8e2040 __insmod_sound_S.rodata_L564 [sound] ce8e76c0 __insmod_sound_S.data_L1640 [sound] ce8e7d40 __insmod_sound_S.bss_L5364 [sound] ce8d50d0 cnxt_rt_open [riptideint] ce8d5210 cnxt_rt_close [riptideint] ce8d5000 __insmod_riptideint_O/usr/lib/riptide/modules/binaries/i586/RedHat= /linux-2.4.18-14/riptideint.o_M3DC5EBC4_V132114 [riptideint] ce8d5060 __insmod_riptideint_S.text_L4469 [riptideint] ce8d61d8 __insmod_riptideint_S.rodata_L20 [riptideint] ce8d6f60 __insmod_riptideint_S.data_L64 [riptideint] ce8d6fa0 __insmod_riptideint_S.bss_L8 [riptideint] ce8d2240 register_sound_special_R93b2ea64 [soundcore] ce8d22f0 register_sound_mixer_Rb7c13795 [soundcore] ce8d2320 register_sound_midi_R524d2a0f [soundcore] ce8d2350 register_sound_dsp_Re128a1e4 [soundcore] ce8d2380 register_sound_synth_R9aaaa4e1 [soundcore] ce8d23b0 unregister_sound_special_R99c95fa5 [soundcore] ce8d23d0 unregister_sound_mixer_R7afc9d8a [soundcore] ce8d23f0 unregister_sound_midi_Rfdab6de3 [soundcore] ce8d2410 unregister_sound_dsp_Rcd083b10 [soundcore] ce8d2430 unregister_sound_synth_Rdf03108a [soundcore] ce8d27c0 mod_firmware_load_R39e3dd23 [soundcore] ce8d2000 __insmod_soundcore_O/lib/modules/2.4.18-14/kernel/drivers/sound/so= undcore.o_M3D76347C_V132114 [soundcore] ce8d2060 __insmod_soundcore_S.text_L1930 [soundcore] ce8d27ec __insmod_soundcore_S.rodata_L60 [soundcore] ce8d3760 __insmod_soundcore_S.data_L72 [soundcore] ce8d37c0 __insmod_soundcore_S.bss_L100 [soundcore] ce8c4060 VNetRegister [vmnet] ce8c493c VNet_RegisterIoctlHandler [vmnet] ce8c49ba VNet_UnregisterIoctlHandler [vmnet] ce8c55ca VNetHub_Alloc [vmnet] ce8c4cda VNetConnect [vmnet] ce8c4dc8 VNetDisconnect [vmnet] ce8c4f98 VNetSend [vmnet] ce8c7dd4 VNetProc_MakeEntry [vmnet] ce8c7e16 VNetProc_RemoveEntry [vmnet] ce8c4fe0 VNetPrintJack [vmnet] ce8c4000 __insmod_vmnet_O/lib/modules/2.4.18-14/misc/vmnet.o_M3DF7F5A0_V132= 114 [vmnet] ce8c4060 __insmod_vmnet_S.text_L15841 [vmnet] ce8c7f80 __insmod_vmnet_S.rodata_L352 [vmnet] ce8c9d78 __insmod_vmnet_S.data_L40 [vmnet] ce8c9da0 __insmod_vmnet_S.bss_L1408 [vmnet] ce8bee60 parport_pc_probe_port_Rd7900004 [parport_pc] ce8bf380 parport_pc_unregister_port_R34f4c24e [parport_pc] ce8be000 __insmod_parport_pc_O/lib/modules/2.4.18-14/kernel/drivers/parport= /parport_pc.o_M3D76347A_V132114 [parport_pc] ce8be060 __insmod_parport_pc_S.text_L8161 [parport_pc] ce8c06e0 __insmod_parport_pc_S.rodata_L180 [parport_pc] ce8c15c0 __insmod_parport_pc_S.data_L3840 [parport_pc] ce8c24c0 __insmod_parport_pc_S.bss_L4 [parport_pc] ce8b4990 parport_claim_R91004644 [parport] ce8b4b00 parport_claim_or_block_Rde072c31 [parport] ce8b4b60 parport_release_Re630d383 [parport] ce8b43a0 parport_register_port_R6a1aa91f [parport] ce8b4560 parport_announce_port_R9e4a6cda [parport] ce8b45c0 parport_unregister_port_R53435cc1 [parport] ce8b41b0 parport_register_driver_Re116b39b [parport] ce8b4260 parport_unregister_driver_Rba018273 [parport] ce8b4650 parport_register_device_Rf6150a17 [parport] ce8b4830 parport_unregister_device_R76e8567d [parport] ce8b4380 parport_enumerate_Rb019f67c [parport] ce8b4350 parport_get_port_Rd0bca560 [parport] ce8b4360 parport_put_port_R62c41e4b [parport] ce8b4910 parport_find_number_Rf018fefa [parport] ce8b4950 parport_find_base_Rbdf5fadd [parport] ce8b5220 parport_negotiate_Rce4ab4f5 [parport] ce8b5520 parport_write_Rc0b58a6d [parport] ce8b5610 parport_read_R8625c153 [parport] ce8b4e80 parport_ieee1284_wakeup_R3949df97 [parport] ce8b5000 parport_wait_peripheral_R0786bf50 [parport] ce8b4f70 parport_poll_peripheral_R03386fcc [parport] ce8b4ec0 parport_wait_event_Re3049e50 [parport] ce8b5730 parport_set_timeout_Rd928bc16 [parport] ce8b54f0 parport_ieee1284_interrupt_Rb3ec0c3b [parport] ce8b5c10 parport_ieee1284_ecp_write_data_Rb2be757e [parport] ce8b5e20 parport_ieee1284_ecp_read_data_R3e9bd2d6 [parport] ce8b6090 parport_ieee1284_ecp_write_addr_Rc57b9b46 [parport] ce8b5770 parport_ieee1284_write_compat_Rca60e714 [parport] ce8b5970 parport_ieee1284_read_nibble_R8a3a0013 [parport] ce8b5ad0 parport_ieee1284_read_byte_R496f0e65 [parport] ce8b62a0 parport_ieee1284_epp_write_data_R6257a65f [parport] ce8b6350 parport_ieee1284_epp_read_data_Race74130 [parport] ce8b63f0 parport_ieee1284_epp_write_addr_R15924867 [parport] ce8b64a0 parport_ieee1284_epp_read_addr_R485a0f16 [parport] ce8b6b80 parport_proc_register_Rfccf7f06 [parport] ce8b6c60 parport_proc_unregister_Rfc1985ed [parport] ce8b6c90 parport_device_proc_register_Rbb9f33a4 [parport] ce8b6d70 parport_device_proc_unregister_R15e1f3ad [parport] ce8b6da0 parport_default_proc_register_R109c8f9a [parport] ce8b6dc0 parport_default_proc_unregister_Rd775b7f4 [parport] ce8b4db0 parport_parse_irqs_Rfe3a2867 [parport] ce8b4dd0 parport_parse_dmas_Rc976df0b [parport] ce8b7170 parport_open_R86cec63b [parport] ce8b7260 parport_close_R8ff537d2 [parport] ce8b7e60 parport_device_id_Reaab2342 [parport] ce8b7270 parport_device_num_R2ce00ef0 [parport] ce8b72d0 parport_device_coords_R4be801ae [parport] ce8b7590 parport_daisy_deselect_all_Reef49b71 [parport] ce8b75a0 parport_daisy_select_R29c43045 [parport] ce8b6fb0 parport_daisy_init_Rc15cfa3d [parport] ce8b7850 parport_find_device_R3f481df7 [parport] ce8b78e0 parport_find_class_R25212bbb [parport] ce8b4000 __insmod_parport_O/lib/modules/2.4.18-14/kernel/drivers/parport/pa= rport.o_M3D76347A_V132114 [parport] ce8b4060 __insmod_parport_S.text_L16235 [parport] ce8b7fe0 __insmod_parport_S.rodata_L1576 [parport] ce8bc1a0 __insmod_parport_S.data_L728 [parport] ce8bc480 __insmod_parport_S.bss_L64 [parport] ce8ad060 VMX86_RegisterMonitor [vmmon] ce8ad000 __insmod_vmmon_O/lib/modules/2.4.18-14/misc/vmmon.o_M3DF7F557_V132= 114 [vmmon] ce8ad060 __insmod_vmmon_S.text_L14326 [vmmon] ce8b0860 __insmod_vmmon_S.rodata_L1240 [vmmon] ce8b260c __insmod_vmmon_S.data_L12 [vmmon] ce8b2620 __insmod_vmmon_S.bss_L2036 [vmmon] ce8a92c0 autofs_hash_lookup [autofs] ce8aab00 autofs_wait [autofs] ce8aaea8 __insmod_autofs_S.rodata_L80 [autofs] ce8abda0 __insmod_autofs_S.data_L548 [autofs] ce8a9450 autofs_hash_dputall [autofs] ce8a90e0 autofs_expire [autofs] ce8aa920 autofs_catatonic_mode [autofs] ce8a9490 autofs_hash_nuke [autofs] ce8a9060 __insmod_autofs_S.text_L7692 [autofs] ce8a9000 __insmod_autofs_O/lib/modules/2.4.18-14/kernel/fs/autofs/autofs.o_= M3D76347D_V132114 [autofs] ce8a93e0 autofs_hash_enum [autofs] ce8a90c0 autofs_update_usage [autofs] ce8a9330 autofs_hash_insert [autofs] ce8a9870 autofs_read_super [autofs] ce8abf20 autofs_root_inode_operations [autofs] ce8aad60 autofs_wait_release [autofs] ce8abec0 autofs_root_operations [autofs] ce8abf80 autofs_symlink_inode_operations [autofs] ce8abda0 autofs_dir_operations [autofs] ce8a9390 autofs_hash_delete [autofs] ce8abe00 autofs_dir_inode_operations [autofs] ce8a9290 autofs_initialize_hash [autofs] ce8a3260 pnic2_timer [tulip] ce8a6fc4 tulip_debug [tulip] ce8a73f8 t21040_csr13 [tulip] ce89e610 tulip_mdio_write [tulip] ce8a27d0 t21142_start_nway [tulip] ce8a6fe0 tulip_tbl [tulip] ce8a7408 t21041_csr13 [tulip] ce8a7412 t21041_csr14 [tulip] ce8a741c t21041_csr15 [tulip] ce89f990 comet_timer [tulip] ce8a74ac tulip_max_interrupt_work [tulip] ce89d000 __insmod_tulip_O/lib/modules/2.4.18-14/kernel/drivers/net/tulip/tu= lip.o_M3D76347A_V132114 [tulip] ce89dcc0 tulip_interrupt [tulip] ce8a3900 __insmod_tulip_S.rodata_L868 [tulip] ce89f1c0 tulip_find_mii [tulip] ce8a74b0 tulip_rx_copybreak [tulip] ce89d060 __insmod_tulip_S.text_L26587 [tulip] ce8a32b0 pnic2_start_nway [tulip] ce8a74a0 __insmod_tulip_S.bss_L160 [tulip] ce89d060 tulip_parse_eeprom [tulip] ce89d7f0 tulip_refill_rx [tulip] ce89f940 mxic_timer [tulip] ce8a2d50 pnic_do_nway [tulip] ce89e730 tulip_select_media [tulip] ce8a3a40 medianame [tulip] ce89e4a0 tulip_mdio_read [tulip] ce89efb0 tulip_check_duplex [tulip] ce8a2590 t21142_timer [tulip] ce8a28c0 t21142_lnk_change [tulip] ce8a7472 t21142_csr14 [tulip] ce89d640 tulip_read_eeprom [tulip] ce8a3ae0 tulip_media_cap [tulip] ce8a2e90 pnic_lnk_change [tulip] ce8a33e0 pnic2_lnk_change [tulip] ce8a2f90 pnic_timer [tulip] ce89f460 tulip_timer [tulip] ce8a6d60 __insmod_tulip_S.data_L1832 [tulip] ce89b000 __insmod_ipt_REJECT_O/lib/modules/2.4.18-14/kernel/net/ipv4/netfil= ter/ipt_REJECT.o_M3D763481_V132114 [ipt_REJECT] ce89b060 __insmod_ipt_REJECT_S.text_L2188 [ipt_REJECT] ce89bd40 __insmod_ipt_REJECT_S.data_L56 [ipt_REJECT] ce89b8ec __insmod_ipt_REJECT_S.rodata_L32 [ipt_REJECT] ce893060 __insmod_iptable_filter_S.text_L327 [iptable_filter] ce8935a0 __insmod_iptable_filter_S.data_L876 [iptable_filter] ce893000 __insmod_iptable_filter_O/lib/modules/2.4.18-14/kernel/net/ipv4/ne= tfilter/iptable_filter.o_M3D763481_V132114 [iptable_filter] ce88f6d0 ipt_register_table_R03805bf4 [ip_tables] ce88f8c0 ipt_unregister_table_Ra187b1ea [ip_tables] ce88f5a0 ipt_register_match_Ra5d024bc [ip_tables] ce88f680 ipt_unregister_match_Raa0f3b43 [ip_tables] ce88e090 ipt_do_table_R5b518d47 [ip_tables] ce88f480 ipt_register_target_Rc893f8eb [ip_tables] ce88f560 ipt_unregister_target_R6ad8c3cd [ip_tables] ce88e000 __insmod_ip_tables_O/lib/modules/2.4.18-14/kernel/net/ipv4/netfilt= er/ip_tables.o_M3D763481_V132114 [ip_tables] ce88e060 __insmod_ip_tables_S.text_L9971 [ip_tables] ce890838 __insmod_ip_tables_S.rodata_L100 [ip_tables] ce891680 __insmod_ip_tables_S.data_L504 [ip_tables] ce853320 __insmod_mousedev_S.data_L160 [mousedev] ce852b9c __insmod_mousedev_S.rodata_L328 [mousedev] ce853340 mousedev_fops [mousedev] ce852060 __insmod_mousedev_S.text_L2876 [mousedev] ce8533c0 __insmod_mousedev_S.bss_L180 [mousedev] ce852000 __insmod_mousedev_O/lib/modules/2.4.18-14/kernel/drivers/input/mou= sedev.o_M3D763477_V132114 [mousedev] ce8501b0 keybdev_event [keybdev] ce850140 keybdev_ledfunc [keybdev] ce850000 __insmod_keybdev_O/lib/modules/2.4.18-14/kernel/drivers/input/keyb= dev.o_M3D763477_V132114 [keybdev] ce8503d8 __insmod_keybdev_S.rodata_L20 [keybdev] ce850840 __insmod_keybdev_S.data_L576 [keybdev] ce850060 __insmod_keybdev_S.text_L812 [keybdev] ce84a3a0 hid_set_field [hid] ce84a360 hid_output_report [hid] ce84ca10 hidinput_connect [hid] ce84ddc0 hid_blacklist [hid] ce84bc50 hiddev_exit [hid] ce84cc34 __insmod_hid_S.rodata_L280 [hid] ce84bbe0 hiddev_disconnect [hid] ce84e120 __insmod_hid_S.bss_L68 [hid] ce84bc30 hiddev_init [hid] ce84a070 hid_read_report [hid] ce84b020 hiddev_hid_event [hid] ce84a700 hid_init_reports [hid] ce849060 __insmod_hid_S.text_L15138 [hid] ce84a680 hid_open [hid] ce84a5e0 hid_write_report [hid] ce849000 __insmod_hid_O/lib/modules/2.4.18-14/kernel/drivers/usb/hid.o_M3D7= 6347C_V132114 [hid] ce84c7a0 hidinput_hid_event [hid] ce84dd80 __insmod_hid_S.data_L904 [hid] ce84cb70 hidinput_disconnect [hid] ce84baf0 hiddev_connect [hid] ce84a460 hid_find_field [hid] ce84a6d0 hid_close [hid] ce846470 input_register_device_Rc9a044bc [input] ce846550 input_unregister_device_R74322fa0 [input] ce8465f0 input_register_handler_R04c2b449 [input] ce846650 input_unregister_handler_Re20902a3 [input] ce846800 input_register_minor_Re986ad09 [input] ce846820 input_unregister_minor_R3827a32e [input] ce846380 input_open_device_Rd88fa13f [input] ce8463b0 input_close_device_R53b634d4 [input] ce846060 input_event_Rf31866c9 [input] ce846000 __insmod_input_O/lib/modules/2.4.18-14/kernel/drivers/input/input.= o_M3D763477_V132114 [input] ce846060 __insmod_input_S.text_L2099 [input] ce846b48 __insmod_input_S.rodata_L88 [input] ce847540 __insmod_input_S.data_L72 [input] ce8475a0 __insmod_input_S.bss_L128 [input] ce83e060 __insmod_usb-ohci_S.text_L15721 [usb-ohci] ce842ec0 __insmod_usb-ohci_S.data_L200 [usb-ohci] ce83e00