[riptide] [riptide-announce] Help needed for Riptide

Bruno Miranda bjdesa at cyber.net.pk
Mon Sep 29 19:48:26 EDT 2003


I just installed Linux on my box I followed the procedure to install the 
Riptide drivers unfortunately I cant get the system to play any sound. 
However I did find that if I slide the Mic in control volume I get a 
scratching sound and able to to talk in my Mic and it plays on the 
speakers. but when I try sound recording it doe not seem to work. Could 
someone tell me what I should do to get sound on my system. Any help in 
this regard would be appreciated a lot.


Bruno Miranda.

[root at nkanand bjdesa]# uname -r
[root at nkanand bjdesa]# cd sound
[root at nkanand sound]# rpm -i 
Linux RIPTIDE audio/communication drivers, version 0.6lnxtbeta03091200

USE AT YOUR OWN RISK! See the file /usr/lib/riptide/LICENSE for details.

Conexant Systems neither distributes nor maintains this package.

If you require assistance or need more information, go to:

When reporting a problem for the first time, please send
us the file generated by "ripconfig --dumpdiag".

Pre-built RIPTIDE modules that seem compatible with your system were 
found under

RIPTIDE module configuration completed.

[root at nkanand bjdesa]# dmesg
Linux version 2.4.20-20.9 (bhcompile at stripples.devel.redhat.com) (gcc 
version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Mon
Aug 18 11:45:58 EDT 2003
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
  BIOS-e820: 000000000fef0000 - 000000000feffc00 (ACPI data)
  BIOS-e820: 000000000feffc00 - 000000000ff00000 (ACPI NVS)
  BIOS-e820: 000000000ff00000 - 0000000010000000 (reserved)
  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
254MB LOWMEM available.
On node 0 totalpages: 65264
zone(0): 4096 pages.
zone(1): 61168 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 1109.904 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2215.11 BogoMIPS
Memory: 251920k/261056k available (1358k kernel code, 6712k reserved, 
1004k data, 132k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd99e, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801AA PCI Bridge
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
PCI: Found IRQ 9 for device 01:08.0
PCI: Sharing IRQ 9 with 00:01.0
PCI: Found IRQ 9 for device 01:09.0
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Sharing IRQ 9 with 01:09.1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT 
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta3-.2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH: IDE controller at PCI slot 00:1f.1
ICH: chipset revision 2
ICH: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
hda: Maxtor 90845D4, ATA DISK drive
blk: queue c03cdfe0, I/O limit 4095Mb (mask 0xffffffff)
hdc: CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1092/240/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
  hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 11:55:13 Aug 18 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1080, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
LVM version 1.0.5+(22/07/2002) module loaded
loop: loaded (max 8 devices)
Adding Swap: 521632k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Enabling device 01:08.0 (0100 -> 0103)
PCI: Found IRQ 9 for device 01:08.0
PCI: Sharing IRQ 9 with 00:01.0
divert: allocating divert_blk for eth0
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xd08c5000, 
00:50:ba:58:57:0f, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner 
ability 45e1.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 202M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.1 20020211 on minor 0
mtrr: base(0xf8000000) is not aligned on a size(0x180000) boundary
PCI: Found IRQ 9 for device 00:01.0
PCI: Sharing IRQ 9 with 01:08.0
ide-floppy driver 0.99.newide
hdc: attached ide-cdrom driver.
hdc: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
cdrom: This disc doesn't have any tracks I recognize!
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 
Conexant Sound Driver v0.6lnxtbeta03091200 time 17:59:03 Sep 12 2003
<RIPTIDE> Init_module is completed
<RTLOW> version v0.6lnxtbeta03091200 time 17:58:58 Sep 12 2003
<RTLOW> Look for 127a 4320 - absent
<RTLOW> Look for 127a 4330 - absent
<RTLOW> Look for 127a 4310PCI: Enabling device 01:09.0 (0300 -> 0301)
PCI: Found IRQ 9 for device 01:09.0
PCI: Sharing IRQ 9 with 00:1f.3
PCI: Sharing IRQ 9 with 01:09.1
  - found at io 2400 irq 9
<RTLOW> Start allocation of resources: c76e3100
<RIPTIDE> Register hardware c76e3100
<RIPTIDE> register is  successful
<RTLOW> Resources are allocated: io 0x2400 irq 9
<RTLOW> Init command interface: 2400 9 d0dece20
<RP_CMDIF> RipTide version before:
ASIC  : 3
PROG  : 773
<RP_CMDIF> Firmware size: 15597
<RP_CMDIF> Start RiptideLoadImage
<RP_CMDIF> Firmware is loaded.
<RP_CMDIF> RipTide version after:
ASIC  : 3
PROG  : 773
<RTINT> requesting io ports 0x2400-0x243f
<RTLOW> Init command riptide: 2400 9 d0dece20 c0b6f280 d0dc09e0 c0b6f210
<RTLOW> riptide FM at io ports 0x388-0x38b
<RTLOW> Init_module is completed: index = 2
[root at nkanand bjdesa]#

riptide-announce mailing list
riptide-announce at lists.linuxant.com

More information about the riptide mailing list