[driverloader] Problems with driver for USR5410

[Stephan Krempel]

Hi together

I have to install USR5410 on a Debian System (testing), so i installed  
driverloader from the provided deb (v 1.52). The module compiled well  
and the config web interface seems to work.
Now I installed the newest drivers from U.S.Robotics (v 4.0q 919) on  
Windows 2000. Unfortunatly I don't have any WinXP installation.
Ok, I then copied usr11g.inf, usr11g.sys and tiacx111.bin to linux and  
tried to configure driverloader.

The parsing of inf file seems to work fine and i got a screen to tell  
the location of the other two files. If I now find the files by using  
the browse button and so the whole path with filename is in the field,  
then I get a popup message "The document contains no data". If only the  
path (without filename) is there, the browser does something, but the  
webpage shown doesn't change at all and also no popup is comming up.

At home of the Configurator now the Driver is shown correctly.

When I insert the Card in PCCARD slot dmesg sais:
>>
cs: cb_alloc(bus 3): vendor 0x104c, device 0x9066
PCI: Enabling device 03:00.0 (0000 -> 0002)
driverloader: unable to load "/var/lib/driverloader/usr11g.sys" (-5)
<<

When I try to load the module by hand, it sais:

>>
Warning: loading /lib/modules/2.4.23/misc/driverloader.o will taint the  
kernel: non-GPL license - see LICENSE file; Copyright (c)2003 Linuxant  
inc.
  See http://www.tux.org/lkml/#export-tainted for information about  
tainted modules
/lib/modules/2.4.23/misc/driverloader.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,  
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.23/misc/driverloader.o: insmod /lib/modules/2.4.23/ 
misc/driverloader.o failed
/lib/modules/2.4.23/misc/driverloader.o: insmod driverloader failed
<<

and in dmesg:
>>
driverloader: unable to load "/var/lib/driverloader/usr11g.sys" (-5)
<<

If there is someone who could help me somehow, it will be very welcome.

Greetz
Stephan