[driverloader] driverloader not working in mandrake 9, 2 with drakeconnect

Linuxant support (Jonathan) support at linuxant.com
Mon Feb 9 11:48:16 EST 2004


Hi,

we will try to configure manually your wireless interface. Please edit the 
file '/etc/sysconfig/network-scripts/ifcfg-eth1'. Here is a sample of this 
file for Mandrake :

---
DEVICE=eth1
BOOTPROTO=dhcp
ONBOOT=yes
TYPE=Wireless
PEERDNS=yes
MODE=Managed
ESSID=C40079
#KEY=AAAAAAAAAAAAAAAAAAAAAAAAAA
---

After that, you will be able to bring up and down the wireless interface using 
the following commands :

---
ifup eth1
ifdown eth1
---

If you require more assistance, send us the output of 'dumpdiag'. Type the 
following in a root shell:

# dldrconfig --dumpdiag

Just send us the generated file located in /tmp ('driverloaderdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com


On Sunday 08 February 2004 02:04, SHEPHERD,DAVID THOMAS wrote:
> I can't seem to get driverloader to work in mandrake 9.2 for my
> Intel pro wireless 2100.  I can do iwconfig and set and essid to
> mine and I can even scan with iwlist and I can see the AP.  I
> tried bringing up the eth1 interface with ifconfig and it will not
> obtain and ipaddress. The driverloader also does not show up in
> drakeconnect for some reason.  I can see my broadcom driver in the
> drakeconnect but not driverloader.  I tried reloading the modules
> and even reinstalling driverloader.  dmesg confirms the card is
> working.  here is ip addr:
>
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>     inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
>     inet6 ::1/128 scope host
>        valid_lft forever preferred_lft forever
>     inet6 ff02::1/128 scope global
>        valid_lft forever preferred_lft forever
> 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen
> 1000
>     link/ether 00:0b:db:1c:c3:b9 brd ff:ff:ff:ff:ff:ff
>     inet 191.168.0.100/24 brd 191.168.0.255 scope global eth0
>     inet6 fe80::20b:dbff:fe1c:c3b9/64 scope link
>        valid_lft forever preferred_lft forever
>     inet6 ff02::1:ff1c:c3b9/128 scope global
>        valid_lft forever preferred_lft forever
>     inet6 ff02::1/128 scope global
>        valid_lft forever preferred_lft forever
> 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen
> 1000
>     link/ether 00:04:23:4c:55:55 brd ff:ff:ff:ff:ff:ff
>     inet6 fe80::204:23ff:fe4c:5555/64 scope link
>        valid_lft forever preferred_lft forever
>     inet6 ff02::1:ff4c:5555/128 scope global
>        valid_lft forever preferred_lft forever
>     inet6 ff02::1/128 scope global
>        valid_lft forever preferred_lft forever
>
>
> Any help would be great.  Thanks.
>
> Dave
>
> _______________________________________________
> driverloader mailing list
> driverloader at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader



More information about the driverloader mailing list