[hcflinux] Timeout problem
danilo.massa at tin.it
Mon Mar 22 16:46:28 EST 2004
Sigh ... I have raised the Idel time until 60 sec and still not work ...
Thanks for your suggestions about a new modem ...
On Sun, 2003-03-02 at 18:30, George Bell wrote:
> Danilo Massa wrote:
> >I have a problem using the hcfpci modem... the modem seems anwer to all
> >my queries but when I try to dial a number I got a timeout error.
> >The transcrispt that follow can describe it:
> >root at www /root]# wvdial TEST
> >--> WvDial: Internet dialer version 1.53
> >--> Initializing modem.
> >--> Sending: ATZ
> >--> Sending: ATX3
> >--> Modem initialized.
> >--> Sending: ATDP3397395621
> >--> Waiting for carrier.
> >--> Timed out while dialing. Trying again.
> >(I have made a test with ATDT too with the same result)
> >... Also I am not able to hear any dialing sound (yes I have used the
> >L1M1 command )...
> >Some one has any idea?
> I don't know much about wvdial. Can you change it's configuration so
> that you can increase the timeout period? You used the L1M1 command
> there I guess? I recommend trying minicom also before giving up.
> If you decide to get a new modem, I recommend a controller-based PCI
> modem. These almost always work in Linux, but you have to make sure it
> specifically says "controller-based". They are a little more $ than the
> software based.
> >My system is composed by:
> >Intel PIII 800 Mhz
> >RedHat Linux 2.4.18-24.8.0
> >hcfpcimodem-0.99mbsibeta02123100 (rebuilt from the src.rpm)
> >The output of listmodem.sh is:
> >MODEM #1:
> > PCI CONFIGURATION INFORMATION READ:
> > Vendor Id : 14F1
> > Device Id : 1035
> > Revision Id : 1
> > Sub Vendor Id : 1467
> > Sub Device Id : D464
> > DEDUCED INFORMATION:
> > Vendor Name : CONEXANT
> > Device Name : HCF P85 Data/Fax/Voice/Speakerphone
> > Modem Type : HCF
> > Download Site : http://www.mbsi.ca/cnxtlindrv/
> >The modem is sold in italy by digicom.it and is described as
> >WIN MODEM PCI V.92L
> >modem V.92, V.90 e 33600 bps - Bus PCI
> > * fax speed up to 14400 bps
> > * digital auto answer machine (with PC turned on)
> > * error correction MNP4/V.42
> > * data compression MNP5/V.42bis
> > * international interface line (CTR21)
> > * dial pulse and tone (DTMF)
> > * flash eeprom updgradable (flash eprom)
> >Thanks in advance ...
More information about the hcflinux