[hsflinux] hsflinux: Cannot open modem on Suse9.1: NO CARRIER detection

gab.cris at virgilio.it gab.cris at virgilio.it
Wed Aug 25 11:36:27 EDT 2004


Hi again Jonathan

I just tried your  string AT &F X1 but it's the same..
i also added "pci=noapci" into kernel boot parameters but it doesn't work..
I'm not sure i understand when i have to pick up the phone..
my phone cable is connected into PC modem output... 
when shall I exactly pick up? my phone is not connected indeed...
..when I launch ATDTXXXXX I hear a click into my notebook but I can't hear
it dialing,
though I set "speaker on" into settings. Into XP mode, I hear the modem
dialing.
I don't know how to proceed now.....
..if yu need other logs or other info please let me know.....
thanks for now for your kind help.... hope to see the light....

bye
Gabriele


>-- Messaggio originale --
>To: gab.cris at virgilio.it
>Subject: Re: =?ISO-8859-15?Q?Re=3A=20=5Bhsflinux=5D=20Cannot=20open=20modem=20on=20Suse=209=2E1=20=2D=20no=20such=20device=20or=09address
>From: Linuxant support (Jonathan) <support at linuxant.com>
>Date: Tue, 24 Aug 2004 10:38:40 -0400 (EDT)
>
>
>Hi,
>
>it is possible that the problem is that the NVM settings are not the same
>in Windows and in Linux but this is rather uncommon as the source of
>problem. We will try something else first. This information is for SuSE
but
>this information is similar for Mandrake.
>
>You could try to use the following initilization string instead :
>
>---
>AT &F X1
>---
>
>If it doesn't help, please try to boot with the 'pci=noapci' kwernel boot
>parameter.
>
>If you require more assistance, please pick up the phone before you use
the
>'ATDTxxxxxx' command to dial. When you ask the modem to dial, do you hear
>a
>'click' then hear the modem dialing?
>
>Regards,
>
>
>Jonathan
>Technical specialist / Linuxant
>www.linuxant.com
>support at linuxant.com
>
>
>----- Original Message -----
>From: gab.cris at virgilio.it
>To: support at linuxant.com
>Sent: Tuesday, August 24, 2004 6:01 AM
>Subject:
>=?ISO-8859-15?Q?Re=3A=20=5Bhsflinux=5D=20Cannot=20open=20modem=20on=20Suse=209=2E1=20=2D=20no=20such=20device=20or=09address?=
>
>
>Hi Jonathan
>
>thank you for your kind help
>I inserted the line you suggested into /etc/mobprobe.conf.local
>and in effect now the module is not present into lsmod output list 
>There seems not to be any error now into hsfdiag.txt file; the handshakin=
>g
>phase
>of modem seems now ok:
>after I launch ATDTXXXXXXX
>it answers "Waiting for carrier" (it didn't before!!)
>but after 20 secs it returns "No carrier" again......
>It happens also with linemode  terminal (minicom)
>There seems to be no tone into line... though the volume of speaker is
ma=
>ximum....
>im afraid....
>I also put initialization string I picked from windows modem connection
>log file
>(i.e. :  AT&FE0V1S0=3D0&C1&D2+MR=3D2;+DR=3D1;+ER=3D1:W2
> and ATS7=3D60M1+ES=3D3,0,2;+DS=3D3;+IFC=3D2,2;X4
>it gave me OK... into windows it is sufficient.. perhaps the problem is
>not his one)
>I checked into *.cty file into XP system and I noticed that settings for
>country="ITALY"
>were a little bit different from settings into linux_via_smartmc.inf;
>is it the file hsf modem use? now, into Suse distribution, I cannot find
>it.... into mandrake
>It seems to me this was the file hsf used...
>maybe I have to copy settings from fsm118e.cty somewhere, now.
>
>I also found old hsfdiag.txt from mandrake 10.0 system;
>im attaching the current  hsfdiag.txt, the old (mandrake) hsfdiag.txt
>and the fsm118e.cty from my XP system... hope it helps....
>
>thanks again for your help.... as soon as i reached my connection by this=
>
>modem
>i'm downloading full version!!! i promise :)
>
>Bye for now... 
>Gabriele
>
>
>
>>-- Messaggio originale --
>>Date: Mon, 23 Aug 2004 15:06:38 +0000
>>From: "Linuxant support (Jonathan)" <support at linuxant.com>
>>To: gab.cris at virgilio.it
>>Subject: Re: [hsflinux] Cannot open modem on Suse 9.1 - no such device
>or
>>	address
>>Cc: hsflinux at lists.linuxant.com
>>Reply-To: support at linuxant.com
>>
>>
>>Hi,
>>
>>in the dump you have provided, we can see that you have the 'slamr' 
>>module in the output of the 'lsmod' command. This module often takes 
>>control of the modem, preventing the HSF driver to control your modem.
>>
>>Since you are using SuSE 9.1, please add the following line in your 
>>'/etc/modprobe.conf.local' file :
>>
>>---
>>install slamr /bin/true
>>---
>>
>>Then, reboot your computer and try to use the modem.
>>
>>For Mandrake 10, if you still want to use the modem driver on this 
>>distribution, please install the latest HSF driver package and then 
>>please send at support at linuxant.com a 'dumpdiag' that you can generate
>
>>with the 'hsfconfig --dumpdiag' command in a root shell.
>>
>>Regards,
>>
>>
>>Jonathan
>>Technical specialist / Linuxant
>>www.linuxant.com
>>support at linuxant.com
>>
>>
>>gab.cris at virgilio.it wrote:
>>> Hello
>>> 
>>> I've been trying to activate my modem but it doesn't work...
>>> I've got  a Fujitsu-Siemens C1020, with Suse9.1 installed.
>>> The installation procedure detected my modem identifying it by "intel
>537
>>> - (AC97 Modem)"
>>> and some of the vendor parameters were correct, though it put "slamr"
>driver.
>>> I executed scanModem and it seems to me the correct chipset is the Con=
>exant
>>> one.
>>> I tried to use modem but it give me "no answer" after dialing.
>>> I so download hsf driver for Suse (x86) - the 14400 bps free  version
>-
>>> 
>>> and installed it (rpm -i xxxx)
>>> i checked the lsmod output and I found various hsf xxx.
>>> but the modem still gives me "no answer" back. (after not checking 'wa=
>it
>>> for dialton':
>>> should i leave this check, i got "no dialtone" instead)
>>> I tried "hsfconfig" but it ends with :"ERROR: no device detected by
hs=
>f
>>> driver"
>>> I so tried by "modprobe ttySHSF0" and it sounds good;
>>> executing "dmesg" gives me back no errors at the end of files.
>>> I sincerely don't know how to proceed (the winmodem into XP runs ok)
>>> 
>>> I previously had Mandrake 10.0 installed into my Fujitsu and I spent
>a
>>week
>>> into trying to configure my modem, use all drivers i found into your
>site,
>>> (rpm, tar) compile, insert modules,
>>> changing initilization string of the modem.... I also copied the info
>of
>>> windows driver file into linux_via_smartmc.inf but the modem always
ga=
>ve
>>> me "NO CARRIER"
>>> 
>>> So i install Suse9.1 hoping to resolve but I see the same problem....
>>> I executed hsfconfig --dumpdiag and got the  output.
>>> 
>>> Im now attaching the log file i obteined hoping it will be useful...
>>> please help :)
>>> 
>>> thank you... in advance.... should you need any other info let me know=
>...
>>> bye for now
>>> Gabriele
>




More information about the hsflinux mailing list