[hsflinux] hsf driver won't drop the line

Linuxant support (Jonathan) support at linuxant.com
Wed Dec 10 17:41:54 EST 2008


Hi,

1) You could try with eFax instead to see if there is a difference.
2) You could try to determine if it's only a specific remove FAX machine 
which is triggering the problem.
3) It's important to know that RHEL (and CentOS) 5.x kernels are 
compiled with only 4K of stacks and it could be incompatible with the 
HSF driver in some cases. You could try with a kernel with larger stack 
size, for example, a custom kernel from http://www.kernel.org or trying 
with a different Linux distribution (only Fedora, RHEL and distributions 
based on them have 4K stacks kernels typically).

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
support at linuxant.com



Wayne Price wrote:
> I’m having a problem with the latest Conexant HSF softmodem driver, 
> 7.68.00.14full, on a CentOS 5 system with kernel 2.6.18-92.1.18.el5.
> 
>  
> 
> I have the full license configured on the driver, the device is setup 
> and almost everything works (this is for a HylaFax installation). The 
> issue we have is that the phone line is never dropped following an 
> incoming connection.
> 
>  
> 
> The system receives the RING, answers the phone and receives the fax and 
> forwards it to the relevant e-mail address. But from the point, the 
> modem responds to the various commands (e.g. ATH0, ATZ with OK, 
> indicating that the line has been hung up and the modem reset). But upon 
> trying to send another fax, the line is still engaged. The modem 
> absolutely refused to drop the phone line. The only way I can drop the 
> phone line is to unload the kernel module with hsfstop after shutting 
> down the hylafax ‘faxgetty’ application for the modem.
> 
>  
> 
> Does anyone have any ideas for things to try, things to check, or 
> something I’m missing in the setup?
> 
>  
> 
> The modem information, from ‘hsfconfig –info’ reads:
> 
> Config for modem unit 0: /dev/ttySHSF0
> 
> Device instance: 0-PCI-14f1:2f50-14f1:205f
> 
> HW revision    : Basic2 2.22 Standard DAA SSD=1 LSD=0x0
> 
> HW profile name: hsfpcibasic2hsfi
> 
> Registration ID: <snip>
> 
> License owner  : <snip>
> 
> License key    : <snip>
> 
> License status : OK
> 
> Current region : UK (T.35 code: 00B4)
> 
>  
> 
> Where do I go from here? If any log information will be useful, I can 
> provide it…
> 
>  
> 
> Wayne
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> hsflinux mailing list
> hsflinux at lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/hsflinux


More information about the hsflinux mailing list