[driverloader] WEP 256 bit

Cristiano De Michele demichel at na.infn.it
Mon Jan 19 03:21:53 EST 2004


Kind Linuxant,
I have a USR805410 pcmcia card + a USR808054 Access Point
and I'm using succesfully your great driverloader. 
The only problem I encountered so far is that I can't set a WEP
key greater than 128 bit (the USE808054 supports 256 bit WEP).
For example if I do:
iwconfig eth1 key s:af17de56138a8 restricted
all goes well and wireless connection works setting the same
key on the AP
but if I do:
iwconfig eth1 key s:af17de56138a8aaaaaaaaaaaaaaaa restricted
I get the error:
Error for wireless request "Set Encode" (8B2A) :
    SET failed on device eth1 ; Invalid argument.

the dldrconfig --dump follows:

+ dldrstop

+ modprobe -v driverloader
/sbin/insmod /lib/modules/2.4.22-ac4/misc/driverloader.o
Using /lib/modules/2.4.22-ac4/misc/driverloader.o
Symbol version prefix ''
Warning: loading /lib/modules/2.4.22-ac4/misc/driverloader.o will taint
the kernel: non-GPL license - see LICENSE file; Copyright (c)2003
Linuxant inc.
  See http://www.tux.org/lkml/#export-tainted for information about
tainted modules
Module driverloader loaded, with warnings

+ lsmod
Module                  Size  Used by    Tainted: P  
driverloader          123400   0 
hid                    21284   0  (unused)
usbmouse                2264   0  (unused)
usb-ohci               21608   0  (unused)
snd-seq-oss            28928   0  (unused)
snd-seq-midi-event      3328   0  [snd-seq-oss]
snd-seq                36368   2  [snd-seq-oss snd-seq-midi-event]
snd-seq-device          4256   0  [snd-seq-oss snd-seq]
snd-pcm-oss            37572   1 
snd-mixer-oss          12976   2  [snd-pcm-oss]
snd-ali5451            12932   4 
snd-pcm                59844   0  [snd-pcm-oss snd-ali5451]
snd-timer              14404   0  [snd-seq snd-pcm]
snd-page-alloc          6228   0  [snd-pcm]
snd-ac97-codec         42328   0  [snd-ali5451]
snd                    32644   1  [snd-seq-oss snd-seq-midi-event
snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-ali5451 snd-pcm
snd-timer snd-ac97-codec]
keybdev                 2020   0  (unused)
mousedev                4212   1 
input                   3232   0  [hid usbmouse keybdev mousedev]
8139cp                 16648   1 
mii                     2400   0  [8139cp]
crc32                   2848   0  [8139cp]

+ date
Mon Jan 19 03:17:31 CET 2004

+ /usr/bin/dldrconfig --info
Linuxant DriverLoader for Wireless LAN devices, version 1.54

Web configurator: listening on 127.0.0.1:18020

Current parameters: ("dldrconfig --info")

Wireless interface name: eth1
	MAC address    : 00:C0:49:D6:FD:72
	Device instance: PCI-0000:02:00.0-104c:9066-010e:16ec
	Device driver  : usr11g
	License owner  : cristiano.demichele at aliceposta.it
	License key    : 5C-B3-34-73-31-68
	License status : OK (Expires 2004-02-16)

+ identify_system
linux-i686(i686)-2.4.22-ac4 Debian-testing/unstable

+ uname -a
Linux piro 2.4.22-ac4 #5 Wed Jan 7 14:33:51 CET 2004 i686 GNU/Linux

+ gcc -v
Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.3/specs
Configured with: ../src/configure -v
--enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr
--mandir=/usr/share/man --infodir=/usr/share/info
--with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared
--with-system-zlib --enable-nls --without-included-gettext
--enable-__cxa_atexit --enable-clocale=gnu --enable-debug
--enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc
i486-linux
Thread model: posix
gcc version 3.3.3 20040110 (prerelease) (Debian)

+ cat -v /proc/version
Linux version 2.4.22-ac4 (root at piro) (gcc version 3.3.3 20031229
(prerelease) (Debian)) #5 Wed Jan 7 14:33:51 CET 2004

+ cat -v /proc/cpuinfo
processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 6
model		: 8
model name	: Mobile AMD Athlon(tm) XP 2000+
stepping	: 1
cpu MHz		: 1656.391
cache size	: 256 KB
fdiv_bug	: no
hlt_bug		: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips	: 3303.01


+ cat -v /etc/debian_version
testing/unstable

+ dmesg
e 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
eth1: New link status: Connected (0001)
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
eth1: New link status: Disconnected (0002)
eth0: link down
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
i8253 count too high! resetting..
eth1: New link status: Connected (0001)
eth0: link down
eth0: link down
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
i8253 count too high! resetting..
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
i8253 count too high! resetting..
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
i8253 count too high! resetting..
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
usb.c: USB disconnect on device 00:02.0-0 address 1
usb.c: USB disconnect on device 00:02.0-2 address 2
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:0f.0-0 address 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver hiddev
usb.c: deregistering driver hid
usb.c: deregistering driver usbkbd
usb.c: deregistering driver usbmouse
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
usb-ohci.c: USB OHCI at membase 0xcf8b4000, IRQ 11
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xcf8b6000, IRQ 11
usb-ohci.c: usb-00:0f.0, ALi Corporation USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc001) is not claimed by any
active driver.
usb.c: registered new driver usbmouse
input0: Logitech USB Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
i8253 count too high! resetting..
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
usb.c: USB disconnect on device 00:02.0-0 address 1
usb.c: USB disconnect on device 00:02.0-2 address 2
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:0f.0-0 address 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver hiddev
usb.c: deregistering driver hid
usb.c: deregistering driver usbmouse
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x330-0x337 0x378-0x37f 0x388-0x38f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
usb-ohci.c: USB OHCI at membase 0xcf8ad000, IRQ 11
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xcf8b2000, IRQ 11
usb-ohci.c: usb-00:0f.0, ALi Corporation USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc001) is not claimed by any
active driver.
usb.c: registered new driver usbmouse
input0: Logitech USB Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
usb.c: USB disconnect on device 00:02.0-0 address 1
usb.c: USB disconnect on device 00:02.0-2 address 2
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 00:0f.0-0 address 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver hiddev
usb.c: deregistering driver hid
usb.c: deregistering driver usbmouse
usb-ohci.c: USB OHCI at membase 0xcf8ad000, IRQ 11
usb-ohci.c: usb-00:02.0, ALi Corporation USB 1.1 Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xcf8b2000, IRQ 11
usb-ohci.c: usb-00:0f.0, ALi Corporation USB 1.1 Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:02.0-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x46d/0xc001) is not claimed by any
active driver.
usb.c: registered new driver usbmouse
input0: Logitech USB Mouse on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech at suse.cz>
hid-core.c: USB HID support drivers
i8253 count too high! resetting..
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth0: link down
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth1: New link status: Connected (0001)
eth0: link down
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
eth0: link down
i8253 count too high! resetting..
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth0: link down
eth0: link down
driverloader: NdisWrapStatusToErrno: unknown: NDIS_STATUS_CLOSING
netndis_xmitcomplete_handler: err -5
driverloader: NdisWrapStatusToErrno: unknown: NDIS_STATUS_CLOSING
netndis_xmitcomplete_handler: err -5
driverloader: NdisWrapStatusToErrno: unknown: NDIS_STATUS_CLOSING
netndis_xmitcomplete_handler: err -5
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth1: New link status: Connected (0001)
i8253 count too high! resetting..
eth1: New link status: Disconnected (0002)
eth1: New link status: Connected (0001)
cs: cb_free(bus 2)
cs: cb_alloc(bus 2): vendor 0x104c, device 0x9066
PCI: Enabling device 02:00.0 (0000 -> 0002)
02:00.0: cache line size not set; forcing 16
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready
eth1: New link status: Connected (0001)
eth1: New link status: Disconnected (0002)
eth1: WEP104, WEP40 supported
eth1: U.S. Robotics 802.11g Wireless Turbo Adapter at 02:00.0 (MAC
address 00:C0:49:D6:FD:72) ready

+ iwconfig --version
iwconfig  Wireless-Tools version 27
          Compatible with Wireless Extension v16 or earlier.

eth1      Recommend Wireless Extension v11 or later,
          Currently compiled with Wireless Extension v15.


+ iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      IEEE 802.11-DS  ESSID:""  Nickname:"unknown"
          Mode:Managed  Channel:0  Bit Rate=1Mb/s   Tx-Power=0 dBm   
          RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:1/1  Signal level:-100 dBm  Noise level:-200 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


+ iwlist accesspoints
lo        Interface doesn't have a list of Peers/Access-Points

eth0      Interface doesn't have a list of Peers/Access-Points

eth1      No Peers/Access-Point in range


+ iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Scan completed :
          Cell 01 - Address: 00:C0:49:E0:61:72
                    ESSID:"USR8054"
                    Mode:Managed
                    Frequency:2.437GHz
                    Quality:1/1  Signal level:-156 dBm  Noise level:-200
dBm
                    Encryption key:on
                    Bit Rate:1Mb/s
                    Bit Rate:2Mb/s
                    Bit Rate:5.5Mb/s
                    Bit Rate:11Mb/s
                    Bit Rate:22Mb/s
                    Extra:bcn_int=100


+ iwlist scanning
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Scan completed :
          Cell 01 - Address: 00:C0:49:E0:61:72
                    ESSID:"USR8054"
                    Mode:Managed
                    Frequency:2.437GHz
                    Quality:1/1  Signal level:-156 dBm  Noise level:-200
dBm
                    Encryption key:on
                    Bit Rate:1Mb/s
                    Bit Rate:2Mb/s
                    Bit Rate:5.5Mb/s
                    Bit Rate:11Mb/s
                    Bit Rate:22Mb/s
                    Extra:bcn_int=100


+ iptables -L -n -v
modprobe: Can't locate module ip_tables
iptables v1.2.9: can't initialize iptables table `filter': iptables who?
(do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.

+ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:08:02:F2:87:EF  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:33142 errors:0 dropped:0 overruns:0 frame:0
          TX packets:157402 errors:0 dropped:2 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:10284148 (9.8 MiB)  TX bytes:221250179 (211.0 MiB)
          Interrupt:11 Base address:0x2000 

eth1      Link encap:Ethernet  HWaddr 00:C0:49:D6:FD:72  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:223 errors:0 dropped:0 overruns:0 frame:0
          TX packets:223 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:62691 (61.2 KiB)  TX bytes:62691 (61.2 KiB)


+ netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface

+ netstat -in
Kernel Interface table
Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP
TX-OVR Flg
eth0   1500 0     33142      0      0      0  157402      0      2     
0 BMU
lo    16436 0       223      0      0      0     223      0      0     
0 LRU

+ ip addr
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
    link/ether 00:08:02:f2:87:ef brd ff:ff:ff:ff:ff:ff
22: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 100
    link/ether 00:c0:49:d6:fd:72 brd ff:ff:ff:ff:ff:ff

+ ip rule
RTNETLINK answers: Invalid argument
Dump terminated

+ ip route

+ lspci -n
00:00.0 Class 0600: 1002:cab0 (rev 13)
00:01.0 Class 0604: 1002:700f (rev 01)
00:02.0 Class 0c03: 10b9:5237 (rev 03)
00:07.0 Class 0601: 10b9:1533
00:08.0 Class 0401: 10b9:5451 (rev 02)
00:0a.0 Class 0607: 104c:ac50 (rev 02)
00:0b.0 Class 0200: 10ec:8139 (rev 20)
00:0c.0 Class 0780: 14f1:2f00 (rev 01)
00:0f.0 Class 0c03: 10b9:5237 (rev 03)
00:10.0 Class 0101: 10b9:5229 (rev c4)
00:11.0 Class 0680: 10b9:7101
01:05.0 Class 0300: 1002:4336
02:00.0 Class 0280: 104c:9066

+ lspci -v
00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
	Flags: bus master, 66Mhz, medium devsel, latency 64
	Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Memory at f4400000 (32-bit, prefetchable) [size=4K]
	I/O ports at 8090 [disabled] [size=4]
	Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
(prog-if 00 [Normal decode])
	Flags: bus master, 66Mhz, medium devsel, latency 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: f4100000-f41fffff
	Prefetchable memory behind bridge: f6000000-f7ffffff
	Secondary status: SERR

00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
	Subsystem: ALi Corporation USB 1.1 Controller
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at f4010000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2

00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
	Subsystem: ALi Corporation ALI M1533 Aladdin IV ISA Bridge
	Flags: bus master, medium devsel, latency 0
	Capabilities: [a0] Power Management version 1

00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 00b0
	Flags: bus master, medium devsel, latency 64, IRQ 5
	I/O ports at 8400 [size=256]
	Memory at f4011000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2

00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus
Controller (rev 02)
	Subsystem: Compaq Computer Corporation: Unknown device 00b0
	Flags: bus master, medium devsel, latency 168, IRQ 10
	Memory at ffbfe000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 1: 10000000-103ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	16-bit legacy interface ports at 0001

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 20)
	Subsystem: Compaq Computer Corporation: Unknown device 00b0
	Flags: bus master, medium devsel, latency 64, IRQ 11
	I/O ports at 8800 [size=256]
	Memory at f4013000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2

00:0c.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
	Subsystem: Compaq Computer Corporation: Unknown device 8d89
	Flags: medium devsel, IRQ 10
	Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
	I/O ports at 8098 [size=8]
	Capabilities: [40] Power Management version 2

00:0f.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
(prog-if 10 [OHCI])
	Subsystem: ALi Corporation USB 1.1 Controller
	Flags: bus master, medium devsel, latency 64, IRQ 11
	Memory at f4012000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2

00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) (prog-if fa)
	Subsystem: ALi Corporation M5229 IDE
	Flags: bus master, medium devsel, latency 32
	I/O ports at 8080 [size=16]
	Capabilities: [60] Power Management version 2

00:11.0 Bridge: ALi Corporation M7101 PMU
	Subsystem: ALi Corporation ALI M7101 Power Management Controller
	Flags: medium devsel

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
U1 (prog-if 00 [VGA])
	Subsystem: Compaq Computer Corporation: Unknown device 00b0
	Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel,
latency 66, IRQ 10
	Memory at f6000000 (32-bit, prefetchable) [size=32M]
	I/O ports at 9000 [size=256]
	Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2

02:00.0 Network controller: Texas Instruments: Unknown device 9066
	Subsystem: Unknown device 010e:16ec
	Flags: bus master, medium devsel, latency 168, IRQ 10
	Memory at 10000000 (32-bit, non-prefetchable) [size=8K]
	Memory at 10020000 (32-bit, non-prefetchable) [size=128K]
	Capabilities: [40] Power Management version 2


+ lspci -n -vvv
00:00.0 Class 0600: 1002:cab0 (rev 13)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
	Region 1: Memory at f4400000 (32-bit, prefetchable) [size=4K]
	Region 2: I/O ports at 8090 [disabled] [size=4]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 Class 0604: 1002:700f (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: f4100000-f41fffff
	Prefetchable memory behind bridge: f6000000-f7ffffff
	Secondary status: SERR
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 Class 0c03: 10b9:5237 (rev 03) (prog-if 10)
	Subsystem: 10b9:5237
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f4010000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 Class 0601: 10b9:1533
	Subsystem: 10b9:1533
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [a0] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 Class 0401: 10b9:5451 (rev 02)
	Subsystem: 0e11:00b0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR+ <PERR+
	Latency: 64 (500ns min, 6000ns max)
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 8400 [size=256]
	Region 1: Memory at f4011000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Class 0607: 104c:ac50 (rev 02)
	Subsystem: 0e11:00b0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at ffbfe000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: ffbfd000-ffbfd000 (prefetchable)
	Memory window 1: 10000000-103ff000
	I/O window 0: 00004000-000040ff
	I/O window 1: 00004400-000044ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
	16-bit legacy interface ports at 0001

00:0b.0 Class 0200: 10ec:8139 (rev 20)
	Subsystem: 0e11:00b0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at 8800 [size=256]
	Region 1: Memory at f4013000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0c.0 Class 0780: 14f1:2f00 (rev 01)
	Subsystem: 0e11:8d89
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=64K]
	Region 1: I/O ports at 8098 [size=8]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.0 Class 0c03: 10b9:5237 (rev 03) (prog-if 10)
	Subsystem: 10b9:5237
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (20000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f4012000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Class 0101: 10b9:5229 (rev c4) (prog-if fa)
	Subsystem: 10b9:5229
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 0
	Region 4: I/O ports at 8080 [size=16]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:11.0 Class 0680: 10b9:7101
	Subsystem: 10b9:7101
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

01:05.0 Class 0300: 1002:4336
	Subsystem: 0e11:00b0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B+
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 66 (2000ns min), Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at f6000000 (32-bit, prefetchable) [size=32M]
	Region 1: I/O ports at 9000 [size=256]
	Region 2: Memory at f4100000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at <unassigned> [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:00.0 Class 0280: 104c:9066
	Subsystem: 010e:16ec
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x10 (64 bytes)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at 10000000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at 10020000 (32-bit, non-prefetchable) [size=128K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-


+ cat -v /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: PCI device 1002:cab0 (ATI Technologies Inc) (rev 19).
      Master Capable.  Latency=64.  
      Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff].
      Prefetchable 32 bit memory at 0xf4400000 [0xf4400fff].
      I/O at 0x8090 [0x8093].
  Bus  0, device   1, function  0:
    PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 1).
      Master Capable.  Latency=99.  Min Gnt=12.
  Bus  0, device   2, function  0:
    USB Controller: ALi Corporation USB 1.1 Controller (rev 3).
      IRQ 11.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xf4010000 [0xf4010fff].
  Bus  0, device  15, function  0:
    USB Controller: ALi Corporation USB 1.1 Controller (#2) (rev 3).
      IRQ 11.
      Master Capable.  Latency=64.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xf4012000 [0xf4012fff].
  Bus  0, device   7, function  0:
    ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
(rev 0).
  Bus  0, device   8, function  0:
    Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 2).
      IRQ 5.
      Master Capable.  Latency=64.  Min Gnt=2.Max Lat=24.
      I/O at 0x8400 [0x84ff].
      Non-prefetchable 32 bit memory at 0xf4011000 [0xf4011fff].
  Bus  0, device  10, function  0:
    CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 2).
      IRQ 10.
      Master Capable.  Latency=168.  Max Lat=5.
      Non-prefetchable 32 bit memory at 0xffbfe000 [0xffbfefff].
  Bus  0, device  11, function  0:
    Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 32).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=32.Max Lat=64.
      I/O at 0x8800 [0x88ff].
      Non-prefetchable 32 bit memory at 0xf4013000 [0xf40130ff].
  Bus  0, device  12, function  0:
    Communication controller: Conexant HSF 56k HSFi Modem (rev 1).
      IRQ 10.
      Master Capable.  Latency=64.  
      Non-prefetchable 32 bit memory at 0xf4000000 [0xf400ffff].
      I/O at 0x8098 [0x809f].
  Bus  0, device  16, function  0:
    IDE interface: ALi Corporation M5229 IDE (rev 196).
      Master Capable.  Latency=32.  Min Gnt=2.Max Lat=4.
      I/O at 0x8080 [0x808f].
  Bus  0, device  17, function  0:
    Bridge: ALi Corporation M7101 PMU (rev 0).
  Bus  1, device   5, function  0:
    VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
(rev 0).
      IRQ 10.
      Master Capable.  Latency=66.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xf6000000 [0xf7ffffff].
      I/O at 0x9000 [0x90ff].
      Non-prefetchable 32 bit memory at 0xf4100000 [0xf410ffff].
  Bus  2, device   0, function  0:
    Network controller: PCI device 104c:9066 (rev 0).
      IRQ 10.
      Master Capable.  Latency=168.  
      Non-prefetchable 32 bit memory at 0x10000000 [0x10001fff].
      Non-prefetchable 32 bit memory at 0x10020000 [0x1003ffff].

+ cat -v /proc/cmdline
BOOT_IMAGE=LinuxAC ro root=305 hdc=ide-scsi nmi_watchdog=1

+ cat -v /proc/uptime
12708.99 11372.47

+ cat -v /proc/devices
Character devices:
  1 mem
  2 pty
  3 ttyp
  4 ttyS
  5 cua
  7 vcs
 10 misc
 13 input
 14 sound
116 alsa
128 ptm
136 pts
162 raw
180 usb
202 cpu/msr
203 cpu/cpuid
254 pcmcia

Block devices:
  2 fd
  3 ide0
 22 ide1

+ cat -v /proc/misc
  1 psaux
184 microcode

+ cat -v /proc/filesystems
nodev	rootfs
nodev	bdev
nodev	proc
nodev	sockfs
nodev	tmpfs
nodev	shm
nodev	pipefs
nodev	binfmt_misc
	ext3
	ext2
nodev	ramfs
	iso9660
nodev	nfs
nodev	autofs
	reiserfs
nodev	devpts
nodev	usbdevfs
nodev	usbfs
nodev	pcihpfs

+ cat -v /proc/interrupts
           CPU0       
  0:    1270901          XT-PIC  timer
  1:      45842          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:          1          XT-PIC  ALI 5451
  9:       1271          XT-PIC  acpi
 10:     408252          XT-PIC  Texas Instruments PCI1410 PC card
Cardbus Controller, driverloader
 11:     296096          XT-PIC  usb-ohci, usb-ohci, eth0
 12:       4708          XT-PIC  PS/2 Mouse
 14:      59595          XT-PIC  ide0
 15:         35          XT-PIC  ide1
NMI:       2272 
LOC:    1270627 
ERR:      35963
MIS:          0

+ cat -v /proc/iomem
00000000-0009e7ff : System RAM
0009e800-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000e0000-000effff : Extension ROM
000f0000-000fffff : System ROM
00100000-0eeeffff : System RAM
  00100000-002bd8cb : Kernel code
  002bd8cc-0035ef23 : Kernel data
0eef0000-0eefefff : ACPI Tables
0eeff000-0eefffff : ACPI Non-volatile Storage
0ef00000-0effffff : System RAM
10000000-103fffff : PCI CardBus #02
  10000000-10001fff : PCI device 104c:9066
    10000000-10001fff : driverloader
  10020000-1003ffff : PCI device 104c:9066
    10020000-1003ffff : driverloader
f4000000-f400ffff : Conexant HSF 56k HSFi Modem
f4010000-f4010fff : ALi Corporation USB 1.1 Controller
  f4010000-f4010fff : usb-ohci
f4011000-f4011fff : ALi Corporation M5451 PCI AC-Link Controller Audio
Device
f4012000-f4012fff : ALi Corporation USB 1.1 Controller (#2)
  f4012000-f4012fff : usb-ohci
f4013000-f40130ff : Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+
  f4013000-f40130ff : 8139cp
f4100000-f41fffff : PCI Bus #01
  f4100000-f410ffff : ATI Technologies Inc Radeon Mobility U1
f4400000-f4400fff : PCI device 1002:cab0 (ATI Technologies Inc)
f6000000-f7ffffff : PCI Bus #01
  f6000000-f7ffffff : ATI Technologies Inc Radeon Mobility U1
f8000000-fbffffff : PCI device 1002:cab0 (ATI Technologies Inc)
ffbfd000-ffbfdfff : PCI CardBus #02
ffbfe000-ffbfefff : Texas Instruments PCI1410 PC card Cardbus Controller
fff80000-ffffffff : reserved

+ cat -v /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03b0-03bb : RadeonIGP
03c0-03df : vga+
  03d3-03d3 : RadeonIGP
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
8000-803f : ALi Corporation M7101 PMU
8040-805f : ALi Corporation M7101 PMU
8080-808f : ALi Corporation M5229 IDE
  8080-8087 : ide0
  8088-808f : ide1
8090-8093 : PCI device 1002:cab0 (ATI Technologies Inc)
8098-809f : Conexant HSF 56k HSFi Modem
8400-84ff : ALi Corporation M5451 PCI AC-Link Controller Audio Device
  8400-84ff : ALI 5451
8800-88ff : Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
  8800-88ff : 8139cp
9000-9fff : PCI Bus #01
  9000-90ff : ATI Technologies Inc Radeon Mobility U1

+ cat -v /proc/dma
 4: cascade

+ cat -v /proc/mtrr
reg00: base=0x00000000 (   0MB), size= 128MB: write-back, count=1
reg01: base=0x08000000 ( 128MB), size=  64MB: write-back, count=1
reg02: base=0x0c000000 ( 192MB), size=  32MB: write-back, count=1
reg03: base=0x0e000000 ( 224MB), size=  16MB: write-back, count=1
reg04: base=0xf6000000 (3936MB), size=  16MB: write-combining, count=1

+ cat -v /proc/partitions
major minor  #blocks  name

   3     0   39070080 hda
   3     1    8193118 hda1
   3     2          1 hda2
   3     3    1028128 hda3
   3     5   10241406 hda5
   3     6   19607301 hda6

+ cat -v /proc/mounts
rootfs / rootfs rw 0 0
/dev/root / ext3 rw 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/hda6 /home ext3 rw 0 0
none /proc/bus/usb usbdevfs rw 0 0

+ cat -v /proc/swaps
Filename			Type		Size	Used	Priority
/dev/hda3                       partition	1028120	47176	-1

+ cat -v /proc/meminfo
        total:    used:    free:  shared: buffers:  cached:
Mem:  245723136 239546368  6176768        0 12550144 69767168
Swap: 1052794880 48308224 1004486656
MemTotal:       239964 kB
MemFree:          6032 kB
MemShared:           0 kB
Buffers:         12256 kB
Cached:          56548 kB
SwapCached:      11584 kB
Active:          71140 kB
Inactive:       148884 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       239964 kB
LowFree:          6032 kB
SwapTotal:     1028120 kB
SwapFree:       980944 kB

+ cat -v /proc/stat
cpu  105011 38 29476 1136380
cpu0 105011 38 29476 1136380
page 635102 369956
swap 2377 11216
intr 2122675 1270905 45842 0 1 1 1 2 35964 0 1271 408254 296096 4708 0
59595 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
disk_io: (3,0):(60083,28272,1270204,31811,739912) 
ctxt 9770815
btime 1074465949
processes 13721

+ cat -v /proc/apm
cat: /proc/apm: No such file or directory

+ cat -v /proc/modules
driverloader          123400   0
hid                    21284   0 (unused)
usbmouse                2264   0 (unused)
usb-ohci               21608   0 (unused)
snd-seq-oss            28928   0 (unused)
snd-seq-midi-event      3328   0 [snd-seq-oss]
snd-seq                36368   2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device          4256   0 [snd-seq-oss snd-seq]
snd-pcm-oss            37572   1
snd-mixer-oss          12976   2 [snd-pcm-oss]
snd-ali5451            12932   4
snd-pcm                59844   0 [snd-pcm-oss snd-ali5451]
snd-timer              14404   0 [snd-seq snd-pcm]
snd-page-alloc          6228   0 [snd-pcm]
snd-ac97-codec         42328   0 [snd-ali5451]
snd                    32644   1 [snd-seq-oss snd-seq-midi-event snd-seq
snd-seq-device snd-pcm-oss snd-mixer-oss snd-ali5451 snd-pcm snd-timer
snd-ac97-codec]
keybdev                 2020   0 (unused)
mousedev                4212   1
input                   3232   0 [hid usbmouse keybdev mousedev]
8139cp                 16648   1
mii                     2400   0 [8139cp]
crc32                   2848   0 [8139cp]

+ env
HZ=100
TERM=xterm
SHELL=/bin/bash
USER=root
LS_COLORS=no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35:
PATH=/usr/sbin:/sbin:/usr/bin:/bin:/usr/local/sbin:/usr/local/bin
MAIL=/var/mail/root
PWD=/root
HOME=/root
SHLVL=2
LS_OPTIONS=--color=auto
LOGNAME=root
DISPLAY=:0.0
XAUTHORITY=/home/demichel/.Xauthority
_=/usr/bin/env

+ sysctl -a
sunrpc.nlm_debug = 0
sunrpc.nfsd_debug = 0
sunrpc.nfs_debug = 0
sunrpc.rpc_debug = 0
cpu.0.speed = 665000
cpu.0.speed-min = 0
cpu.0.speed-max = 0
abi.fake_utsname = 0
abi.trace = 0
abi.defhandler_libcso = 68157441
abi.defhandler_lcall7 = 68157441
abi.defhandler_elf = 0
abi.defhandler_coff = 117440515
dev.cdrom.check_media = 0
dev.cdrom.lock = 1
dev.cdrom.debug = 0
dev.cdrom.autoeject = 0
dev.cdrom.autoclose = 1
dev.cdrom.info = CD-ROM information, Id: cdrom.c 3.12 2000/10/18
dev.cdrom.info = 
dev.cdrom.info = drive name:	
dev.cdrom.info = drive speed:	
dev.cdrom.info = drive # of slots:
dev.cdrom.info = Can close tray:	
dev.cdrom.info = Can open tray:	
dev.cdrom.info = Can lock tray:	
dev.cdrom.info = Can change speed:
dev.cdrom.info = Can select disk:
dev.cdrom.info = Can read multisession:
dev.cdrom.info = Can read MCN:	
dev.cdrom.info = Reports media changed:
dev.cdrom.info = Can play audio:	
dev.cdrom.info = Can write CD-R:	
dev.cdrom.info = Can write CD-RW:
dev.cdrom.info = Can read DVD:	
dev.cdrom.info = Can write DVD-R:
dev.cdrom.info = Can write DVD-RAM:
dev.cdrom.info = 
dev.cdrom.info = 
net.unix.max_dgram_qlen = 10
net.ipv4.conf.eth0.arp_filter = 0
net.ipv4.conf.eth0.tag = 0
net.ipv4.conf.eth0.log_martians = 0
net.ipv4.conf.eth0.bootp_relay = 0
net.ipv4.conf.eth0.medium_id = 0
net.ipv4.conf.eth0.proxy_arp = 0
net.ipv4.conf.eth0.accept_source_route = 1
net.ipv4.conf.eth0.send_redirects = 1
net.ipv4.conf.eth0.rp_filter = 1
net.ipv4.conf.eth0.shared_media = 1
net.ipv4.conf.eth0.secure_redirects = 1
net.ipv4.conf.eth0.accept_redirects = 1
net.ipv4.conf.eth0.mc_forwarding = 0
net.ipv4.conf.eth0.forwarding = 0
net.ipv4.conf.lo.arp_filter = 0
net.ipv4.conf.lo.tag = 0
net.ipv4.conf.lo.log_martians = 0
net.ipv4.conf.lo.bootp_relay = 0
net.ipv4.conf.lo.medium_id = 0
net.ipv4.conf.lo.proxy_arp = 0
net.ipv4.conf.lo.accept_source_route = 1
net.ipv4.conf.lo.send_redirects = 1
net.ipv4.conf.lo.rp_filter = 1
net.ipv4.conf.lo.shared_media = 1
net.ipv4.conf.lo.secure_redirects = 1
net.ipv4.conf.lo.accept_redirects = 1
net.ipv4.conf.lo.mc_forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.default.arp_filter = 0
net.ipv4.conf.default.tag = 0
net.ipv4.conf.default.log_martians = 0
net.ipv4.conf.default.bootp_relay = 0
net.ipv4.conf.default.medium_id = 0
net.ipv4.conf.default.proxy_arp = 0
net.ipv4.conf.default.accept_source_route = 1
net.ipv4.conf.default.send_redirects = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.shared_media = 1
net.ipv4.conf.default.secure_redirects = 1
net.ipv4.conf.default.accept_redirects = 1
net.ipv4.conf.default.mc_forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.all.arp_filter = 0
net.ipv4.conf.all.tag = 0
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.all.bootp_relay = 0
net.ipv4.conf.all.medium_id = 0
net.ipv4.conf.all.proxy_arp = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.send_redirects = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.all.shared_media = 1
net.ipv4.conf.all.secure_redirects = 1
net.ipv4.conf.all.accept_redirects = 1
net.ipv4.conf.all.mc_forwarding = 0
net.ipv4.conf.all.forwarding = 0
net.ipv4.neigh.eth0.locktime = 100
net.ipv4.neigh.eth0.proxy_delay = 80
net.ipv4.neigh.eth0.anycast_delay = 100
net.ipv4.neigh.eth0.proxy_qlen = 64
net.ipv4.neigh.eth0.unres_qlen = 3
net.ipv4.neigh.eth0.gc_stale_time = 60
net.ipv4.neigh.eth0.delay_first_probe_time = 5
net.ipv4.neigh.eth0.base_reachable_time = 30
net.ipv4.neigh.eth0.retrans_time = 100
net.ipv4.neigh.eth0.app_solicit = 0
net.ipv4.neigh.eth0.ucast_solicit = 3
net.ipv4.neigh.eth0.mcast_solicit = 3
net.ipv4.neigh.lo.locktime = 100
net.ipv4.neigh.lo.proxy_delay = 80
net.ipv4.neigh.lo.anycast_delay = 100
net.ipv4.neigh.lo.proxy_qlen = 64
net.ipv4.neigh.lo.unres_qlen = 3
net.ipv4.neigh.lo.gc_stale_time = 60
net.ipv4.neigh.lo.delay_first_probe_time = 5
net.ipv4.neigh.lo.base_reachable_time = 30
net.ipv4.neigh.lo.retrans_time = 100
net.ipv4.neigh.lo.app_solicit = 0
net.ipv4.neigh.lo.ucast_solicit = 3
net.ipv4.neigh.lo.mcast_solicit = 3
net.ipv4.neigh.default.gc_thresh3 = 1024
net.ipv4.neigh.default.gc_thresh2 = 512
net.ipv4.neigh.default.gc_thresh1 = 128
net.ipv4.neigh.default.gc_interval = 30
net.ipv4.neigh.default.locktime = 100
net.ipv4.neigh.default.proxy_delay = 80
net.ipv4.neigh.default.anycast_delay = 100
net.ipv4.neigh.default.proxy_qlen = 64
net.ipv4.neigh.default.unres_qlen = 3
net.ipv4.neigh.default.gc_stale_time = 60
net.ipv4.neigh.default.delay_first_probe_time = 5
net.ipv4.neigh.default.base_reachable_time = 30
net.ipv4.neigh.default.retrans_time = 100
net.ipv4.neigh.default.app_solicit = 0
net.ipv4.neigh.default.ucast_solicit = 3
net.ipv4.neigh.default.mcast_solicit = 3
net.ipv4.ipfrag_secret_interval = 600
net.ipv4.tcp_low_latency = 0
net.ipv4.tcp_frto = 0
net.ipv4.tcp_tw_reuse = 0
net.ipv4.icmp_ratemask = 6168
net.ipv4.icmp_ratelimit = 100
net.ipv4.tcp_adv_win_scale = 2
net.ipv4.tcp_app_win = 31
net.ipv4.tcp_rmem = 4096	87380	174760
net.ipv4.tcp_wmem = 4096	16384	131072
net.ipv4.tcp_mem = 48128	48640	49152
net.ipv4.tcp_dsack = 1
net.ipv4.tcp_ecn = 0
net.ipv4.tcp_reordering = 3
net.ipv4.tcp_fack = 1
net.ipv4.tcp_orphan_retries = 0
net.ipv4.inet_peer_gc_maxtime = 120
net.ipv4.inet_peer_gc_mintime = 10
net.ipv4.inet_peer_maxttl = 600
net.ipv4.inet_peer_minttl = 120
net.ipv4.inet_peer_threshold = 65664
net.ipv4.igmp_max_memberships = 20
net.ipv4.route.secret_interval = 600
net.ipv4.route.min_adv_mss = 256
net.ipv4.route.min_pmtu = 552
net.ipv4.route.mtu_expires = 600
net.ipv4.route.gc_elasticity = 8
net.ipv4.route.error_burst = 500
net.ipv4.route.error_cost = 100
net.ipv4.route.redirect_silence = 2048
net.ipv4.route.redirect_number = 9
net.ipv4.route.redirect_load = 2
net.ipv4.route.gc_interval = 60
net.ipv4.route.gc_timeout = 300
net.ipv4.route.gc_min_interval = 0
net.ipv4.route.max_size = 32768
net.ipv4.route.gc_thresh = 2048
net.ipv4.route.max_delay = 10
net.ipv4.route.min_delay = 2
net.ipv4.icmp_ignore_bogus_error_responses = 0
net.ipv4.icmp_echo_ignore_broadcasts = 0
net.ipv4.icmp_echo_ignore_all = 0
net.ipv4.ip_local_port_range = 32768	61000
net.ipv4.tcp_max_syn_backlog = 1024
net.ipv4.tcp_rfc1337 = 0
net.ipv4.tcp_stdurg = 0
net.ipv4.tcp_abort_on_overflow = 0
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_fin_timeout = 60
net.ipv4.tcp_retries2 = 15
net.ipv4.tcp_retries1 = 3
net.ipv4.tcp_keepalive_intvl = 75
net.ipv4.tcp_keepalive_probes = 9
net.ipv4.tcp_keepalive_time = 7200
net.ipv4.ipfrag_time = 30
net.ipv4.ip_dynaddr = 0
net.ipv4.ipfrag_low_thresh = 196608
net.ipv4.ipfrag_high_thresh = 262144
net.ipv4.tcp_max_tw_buckets = 180000
net.ipv4.tcp_max_orphans = 8192
net.ipv4.tcp_synack_retries = 5
net.ipv4.tcp_syn_retries = 5
net.ipv4.ip_nonlocal_bind = 0
net.ipv4.ip_no_pmtu_disc = 0
net.ipv4.ip_autoconfig = 0
net.ipv4.ip_default_ttl = 64
net.ipv4.ip_forward = 0
net.ipv4.tcp_retrans_collapse = 1
net.ipv4.tcp_sack = 1
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_timestamps = 1
net.core.hot_list_length = 128
net.core.optmem_max = 10240
net.core.message_burst = 50
net.core.message_cost = 5
net.core.mod_cong = 290
net.core.lo_cong = 100
net.core.no_cong = 20
net.core.no_cong_thresh = 20
net.core.netdev_max_backlog = 300
net.core.dev_weight = 64
net.core.rmem_default = 65535
net.core.wmem_default = 65535
net.core.rmem_max = 65535
net.core.wmem_max = 65535
vm.block_dump = 0
vm.laptop_mode = 0
vm.max_map_count = 65536
vm.max-readahead = 31
vm.min-readahead = 3
vm.page-cluster = 3
vm.pagetable_cache = 25	50
vm.kswapd = 512	32	8
vm.overcommit_ratio = 50
vm.overcommit_memory = 0
vm.bdflush = 30	500	0	0	500	3000	60	20	0
kernel.overflowgid = 65534
kernel.overflowuid = 65534
kernel.random.uuid = 3fc42738-29d2-4f28-9dc8-4ba2ee05f9d0
kernel.random.boot_id = 47c5480e-942f-4f4e-be64-b5f749ed96b3
kernel.random.write_wakeup_threshold = 128
kernel.random.read_wakeup_threshold = 8
kernel.random.entropy_avail = 4096
kernel.random.poolsize = 512
kernel.threads-max = 3840
kernel.cad_pid = 1
kernel.sysrq = 1
kernel.sem = 250	32000	32	128
kernel.msgmnb = 16384
kernel.msgmni = 16
kernel.msgmax = 8192
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 33554432
kernel.rtsig-max = 1024
kernel.rtsig-nr = 2
kernel.hotplug = /sbin/hotplug
kernel.modprobe = /sbin/modprobe
kernel.printk = 7	4	1	7
kernel.ctrl-alt-del = 0
kernel.cap-bound = -257
kernel.tainted = 1
kernel.core_pattern = core
kernel.core_setuid_ok = 0
kernel.core_uses_pid = 0
kernel.panic = 0
kernel.domainname = (none)
kernel.hostname = piro
kernel.version = #5 Wed Jan 7 14:33:51 CET 2004
kernel.osrelease = 2.4.22-ac4
kernel.ostype = Linux
fs.lease-break-time = 45
fs.dir-notify-enable = 1
fs.leases-enable = 1
fs.overflowgid = 65534
fs.overflowuid = 65534
fs.dentry-state = 2039	865	45	0	0	0
fs.file-max = 24576
fs.file-nr = 2367	99	24576
fs.inode-state = 1952	312	0	0	0	0	0
fs.inode-nr = 1952	312

+ modprobe -V
modprobe: Nothing to load ???
Specify at least a module or a wildcard like \*
modprobe version 2.4.26

+ modprobe -l *driverloader*
/lib/modules/2.4.22-ac4/misc/driverloader.o

+ cat -v /etc/modules.conf
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade
modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from
ignoring
# the builtin defaults of a path-statement is encountered. Until all
other
# packages use the new `add path'-statement this keep-statement is
essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

alias eth0 		8139cp

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa
### DEBCONF MAGIC
# This file was automatically generated by alsa-base's debconf stuff

alias char-major-116 snd
alias char-major-14 soundcore

options snd major=116 cards_limit=4

alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias /dev/dsp* snd-pcm-oss

alias snd-card-0 snd-ali5451

alias snd-slot-0 snd-card-0
alias sound-slot-0 snd-slot-0

### update-modules: end processing /etc/modutils/alsa

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134	apm
alias /dev/apm_bios		/dev/misc/apm_bios
alias /dev/misc/apm_bios	apm

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/driverloader

### update-modules: end processing /etc/modutils/driverloader

### update-modules: start processing /etc/modutils/hsf
alias /dev/ttySHSF[0-9]* /dev/ttySHSF
alias char-major-240 /dev/ttySHSF
alias /dev/modem /dev/ttySHSF
alias /dev/cuaHSF[0-9]* /dev/ttySHSF
alias char-major-241 /dev/ttySHSF
options hsfserial serialmajor=240 calloutmajor=241
alias char-major-242 hsfosspec
alias /dev/hsfdiag hsfosspec
alias /dev/hsfdiag* /dev/hsfdiag
alias char-major-243 /dev/hsfdiag
options hsfosspec dcpmajor=242 diagmajor=243
probeall /dev/ttySHSF hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali
probeall hsfserial hsfpcibasic2 hsfmc97ich hsfmc97via hsfmc97ali

### update-modules: end processing /etc/modutils/hsf

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the ones that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp          ppp_generic
alias char-major-108    ppp_generic
alias tty-ldisc-3       ppp_async  
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp   
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't
loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info
-t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t
"setserial-module uload"
#
alias /dev/tts          serial
alias /dev/tts/0        serial
alias /dev/tts/1        serial
alias /dev/tts/2        serial
alias /dev/tts/3        serial
post-install serial /etc/init.d/setserial modload > /dev/null 2>
/dev/null
pre-remove serial /etc/init.d/setserial modsave  > /dev/null 2>
/dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 off
#was nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 off
#was rtc

### update-modules: end processing /etc/modutils/arch/i386


+ cat -v /etc/modprobe.conf
# Place your local directives here.


# This line loads the part of the modprobe configuration managed with
# update-modules(8) and built from the contents of /etc/modprobe.d/.
include /lib/modules/modprobe.conf

alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader
alias eth1 driverloader

+ depmod -e -a

+ cd /etc/driverloader/config && find . -ls
602493    4 drwxr-xr-x   2 root     root         4096 Jan 19 03:17 .
602456    0 -rw-r--r--   1 root     root            0 Jan  9 12:22
./.perlmodsok
602466    4 -rw-r--r--   1 root     root         1258 Jan 19 03:17
./00:C0:49:D6:FD:72
602469    0 lrwxrwxrwx   1 root     root           17 Jan 17 14:40
./PCI-0000:02:00.0-104c:9066-010e:16ec -> 00:C0:49:D6:FD:72

+ cd /etc/driverloader/config && find . -print -type f -exec cat {} \;
.
./.perlmodsok
./00:C0:49:D6:FD:72
Service="USR11G"
LowerRange="ethernet"
UpperRange="ndis5"
FactorRSSI=88
RateAdaptationTable0="1 2 5 11"
RateAdaptationFBThd0="50 50 50 50"
RateAdaptationSUThd0="30 30 30 30"
RateAdaptationTable1="1 2 5 11 22"
RateAdaptationFBThd1="50 50 50 50 50"
RateAdaptationSUThd1="30 30 30 30 30"
RateAdaptationTable2="1 2 5 11 18 24 36 48 54"
RateAdaptationFBThd2="50 50 50 50 45 45 45 45 20"
RateAdaptationSUThd2="30 30 30 30 30 30 10 5 0"
PermAddress=0x1b669
HardwareID="TNET1130"
NumACXRxDescriptors=32
NumACXTxDescriptors=32
LeapUserPassword=""
CalibrationInterval=300
EnergyDetection=0
DriverDescription="U.S. Robotics 802.11g Wireless Turbo Adapter"
TriggerRxMem=1
TriggerTx=5
TriggerFcs=0
ScrPad5=0
dot11ABAMode=2
RtsCtsProtection=0
ClockRate=80
ShortSlotTime=0
dot11DesiredBSSType=1
dot11DesiredSSID="0k"
dot11PowerMode=0
dot11DesiredTxRate=0
dot11SupportedRateMask=8
dot11BasicRateMask=1
dot11FragmentationThreshold=4096
dot11RTSThreshold=4096
dot11WEPStatus=1
dot11AuthenticationMode=0
dot11ShortPreambleInvoked=0
Mode4x=1
IBSSProtectionType=0
g80211DraftNumber=6
dot11DesiredChannel=11
DriverName="usr11g"
ServiceBinary="usr11g.sys"
DriverLoaderVersion="1.54"
DriverLoaderInfFile="usr11g.inf"
DriverSysTime="0C"
DriverSysTimeI1=-1924969936
DriverSysTimeI2=0
./PCI-0000:02:00.0-104c:9066-010e:16ec

+ cd /etc/driverloader/static && find . -ls
602455    4 drwxr-xr-x   2 root     root         4096 Jan 18 17:49 .
602494    4 -rw-r--r--   1 root     root           16 Jan 19 00:19
./webconf
602464    4 -rw-r--r--   1 root     root           71 Jan 18 17:49
./00:C0:49:D6:FD:72

+ cd /etc/driverloader/static && find . -print -type f -exec cat {} \;
.
./webconf
127.0.0.1:18020
./00:C0:49:D6:FD:72
LicenseOwner="cristiano.demichele at aliceposta.it"
LicenseKey=0x5CB33473

+ ls -lR /usr/lib/driverloader/.
/usr/lib/driverloader/.:
total 60
-rw-r--r--    1 root     root         1450 Nov 17 21:30 config.mak
-rwx------    1 root     root        15371 Jan  9 12:21 dldrparser.pm
drwxr-xr-x    6 root     root         4096 Jan  9 12:22 modules
-rwx------    1 root     root        26174 Jan  9 12:21 webconfd
-rw-------    1 root     root          690 Jan  9 12:21 webconfd.conf
drwx------    5 root     root         4096 Jan  9 12:22 webconfdocs

/usr/lib/driverloader/./modules:
total 100
drwxr-xr-x    2 root     root         4096 Jan  9 12:22 GPL
-rw-r--r--    1 root     root         6046 Nov  7 18:12 Makefile
drwxr-xr-x    2 root     root         4096 Sep 26 00:42 binaries
-rw-r--r--    1 root     root         8423 Dec 11 00:40 dldrpci.c
drwxr-xr-x    3 root     root         4096 Jan  9 12:22 imported
drwxr-xr-x    2 root     root         4096 Jan  9 12:22 include
-rwxr-xr-x    1 root     root         1801 Nov 29 00:29
kernelcompiler.sh
-rw-r--r--    1 root     root         1953 Nov 16 14:35 osmemory.c
-rw-r--r--    1 root     root         8111 Nov 12 23:54 osresour.c
-rw-r--r--    1 root     root        32876 Dec 13 07:58 osservices.c
-rw-r--r--    1 root     root         4960 Nov  8 16:16 osstdio.c
-rw-r--r--    1 root     root         3595 Nov 27 03:37 osstring.c

/usr/lib/driverloader/./modules/GPL:
total 232
-rw-r--r--    1 root     root        18860 Aug 23 22:10 COPYING
-rw-r--r--    1 root     root         6278 Nov  8 16:32 divdi3.c
-rw-r--r--    1 root     root        18450 Dec  9 05:25 hostap_common.h
-rw-r--r--    1 root     root         2460 Jul  8  2003 ieee802_11.h
-rw-r--r--    1 root     root        46140 Oct 21 10:02 longlong.h
-rw-r--r--    1 root     root       105640 Dec 15 22:39 netndis.c
-rw-r--r--    1 root     root         5342 Dec 11 05:18 netndis.h
-rw-r--r--    1 root     root        15692 Nov 25 22:58 oscompat.h

/usr/lib/driverloader/./modules/binaries:
total 0

/usr/lib/driverloader/./modules/imported:
total 92
-rw-r--r--    1 root     root        80256 Dec 29 05:21
driverloader-i386.O
drwxr-xr-x    2 root     root         4096 Jan  9 12:22 include
-rw-r--r--    1 root     root          360 Dec 29 05:21 makeflags.mak

/usr/lib/driverloader/./modules/imported/include:
total 20
-rw-r--r--    1 root     root        18883 Dec 15 22:09 ndiswrap.h

/usr/lib/driverloader/./modules/include:
total 20
-rw-r--r--    1 root     root        13439 Dec 13 07:45 osservices.h
-rw-r--r--    1 root     root         1062 Nov  8 19:49 typedefs.h

/usr/lib/driverloader/./webconfdocs:
total 16
drwx------    2 root     root         4096 Jan  9 12:22 cgi-bin
drwx------    2 root     root         4096 Jan  9 12:22 images
drwx------    2 root     root         4096 Jan  9 12:22 includes
-rw-------    1 root     root           94 Oct  3 06:29 index.html

/usr/lib/driverloader/./webconfdocs/cgi-bin:
total 32
-rwx------    1 root     root        15774 Oct 30 18:40 config.cgi
-rwx------    1 root     root         2054 Oct 23 16:07 fileupload.cgi
-rwx------    1 root     root         5872 Oct 28 09:25 parse.cgi
-rwx------    1 root     root         2187 Oct 24 19:05 saveconfig.cgi

/usr/lib/driverloader/./webconfdocs/images:
total 20
-rw-------    1 root     root          253 Oct  6 10:27 blink.gif
-rw-------    1 root     root          189 Oct  6 10:27 info.gif
-rw-------    1 root     root         9807 Oct  6 10:27 linuxant.gif

/usr/lib/driverloader/./webconfdocs/includes:
total 32
-rw-------    1 root     root          144 Jan  9 12:21 config.inc
-rw-------    1 root     root          395 Oct 15 08:17 footer.inc
-rw-------    1 root     root          904 Jan  9 12:21 header.inc
-rw-------    1 root     root          963 Jan  9 12:21 mainhead.inc
-rw-------    1 root     root        15670 Oct 15 08:17 tooltip.js

+ ( cd /usr/lib/driverloader && for f in webconfd
webconfdocs/cgi-bin/*.cgi; do 					perl -c ${f}; done )
webconfd syntax OK
webconfdocs/cgi-bin/config.cgi syntax OK
webconfdocs/cgi-bin/fileupload.cgi syntax OK
webconfdocs/cgi-bin/parse.cgi syntax OK
webconfdocs/cgi-bin/saveconfig.cgi syntax OK

+ ls -lR /var/lib/driverloader/.
/var/lib/driverloader/.:
total 236
-rw-r--r--    1 root     root        62772 Jan 17 14:30 tiacx111.bin
-rw-r--r--    1 root     root        12060 Jan 17 14:27 usr11g.inf
-rw-r--r--    1 root     root       152064 Jan 17 14:30 usr11g.sys

+ cd /var/lib/driverloader && find . -name '*.inf' -type f -print -exec
cat {} \;
./usr11g.inf
; 
; USR11G.INF
;
; Win9x/Win2k installation file for USR 11g WLAN Adapter
;
; Copyright (c) All Rights Reserved.
;

[Version]
;CatalogFile=USR11G.cat
Signature = "$Windows NT$"
Provider  = %TI%
Class     = Net
ClassGUID={4d36e972-e325-11ce-bfc1-08002be10318}
DriverVer=08/29/2003,4.0.40.4

[Manufacturer]
%TI% = USR

; pnp cards should be excluded from select
[ControlFlags]
ExcludeFromSelect = PCI\VEN_104C&DEV_9066&SUBSYS_16EC010D
ExcludeFromSelect = PCI\VEN_104C&DEV_9066&SUBSYS_16EC010E


[USR]
%USR11G.DeviceDesc% = USR11G.8400,
PCI\VEN_104C&DEV_9066&SUBSYS_16EC010D
%USR11G.DeviceDesc% = USR11G.8400,
PCI\VEN_104C&DEV_9066&SUBSYS_16EC010E

;
; This section is necessary for the tool
;
[TI3000P.ndi]
AddReg=USR11G.ndi.reg

[USR11G.8400.NT]
BusType         = 5
AddReg          =USR11G.ndi.reg.NT, TI.Param.Reg
Characteristics = 0x84
CopyFiles       =USR11G.8400.CopyFiles.NT, USR11G.8400.BinFiles.NT

[USR11G.ndi.reg.NT]
HKR, Ndi,               Service,    0,  "USR11G"
HKR, Ndi\Interfaces,    LowerRange, 0,  "ethernet"
HKR, Ndi\Interfaces,    UpperRange, 0,  "ndis5"

[USR11G.8400.NT.Services]
AddService = USR11G, 2, USR11G.Service, USR11G.EventLog

[USR11G.Service]
DisplayName     = %USR11G.Service.DispName%
ServiceType     = 1 ;%SERVICE_KERNEL_DRIVER%
StartType       = 3 ;%SERVICE_DEMAND_START%
ErrorControl    = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary   = %12%\USR11G.sys
LoadOrderGroup  = NDIS

[USR11G.EventLog]
AddReg = USR11G.AddEventLog.reg

[USR11G.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000,
"%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7

[USR11G.8400.CopyFiles.NT]
;USR11G.sys
;tiacx111.bin

;
; Copy firmware to system directory for ME
;
[USR11G.8400.BinFiles.NT]
;tiacx111.bin


;
; Windows9x specific
;
[USR11G.8400]
AddReg=USR11G.ndi.reg, TI.Param.Reg, USR11G.8400.Install

[USR11G.8400.Install]
HKR,Ndi\Install,,,"USR11G.8400.Copy"
HKR,Ndi\Remove,,,"USR11G.8400.Remove"

[USR11G.ndi.reg]
HKR,Ndi,DeviceID,,"PCI\VEN_104C&DEV_9066"

;HKR,Ndi,NetType,,1
HKR,Ndi,HelpText,0,%WLANAdapterHelpText%

; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,USR11G.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"

; NDIS Info
HKR, NDIS, LogDriverName, , "USR11G"
HKR, NDIS, MajorNdisVersion, 1, 03
HKR, NDIS, MinorNdisVersion, 1, 0A

HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
HKR,Ndi\Interfaces,DefUpper,,"ndis3,ndis4,ndis5"
HKR,Ndi\Interfaces,UpperRange,,"ndis3,ndis4,ndis5"

; Required Components
HKR,Ndi,InstallInf,,"USR11G.INF"

[USR11G.8400.Copy]
CopyFiles=USR11G.8400.CopyFiles

[USR11G.8400.Remove]
DelFiles=USR11G.8400.CopyFiles

[USR11G.8400.CopyFiles]
;USR11G.sys
;tiacx111.bin


;
; Common sections
;
[TI.Param.Reg]


; Radio factor RSSI
HKR, ,FactorRSSI, , 88

;Rate Adaptation table
;Note - Please use 5 to represent 5.5 MBPS rate


; CCK Only
HKR, ,RateAdaptationTable0,, "1 2 5 11"
HKR, ,RateAdaptationFBThd0,, "50 50 50 50"
HKR, ,RateAdaptationSUThd0,, "30 30 30 30"

; PBCC supported
HKR, ,RateAdaptationTable1,, "1 2 5 11 22"
HKR, ,RateAdaptationFBThd1,, "50 50 50 50 50"
HKR, ,RateAdaptationSUThd1,, "30 30 30 30 30"

; OFDM 
HKR, ,RateAdaptationTable2,, "1 2 5 11 18 24 36 48 54"
HKR, ,RateAdaptationFBThd2,, "50 50 50 50 45 45 45 45 20"
HKR, ,RateAdaptationSUThd2,, "30 30 30 30 30 30 10 5 0"

; PermAddress
HKR,,PermAddress,,112233

; HardwareID
HKR, ,HardwareID, ,"TNET1130"


; Tx/Rx descriptors

HKR, ,NumACXRxDescriptors, ,32
HKR, ,NumACXTxDescriptors, ,32

; LEAP User password
HKR, ,LeapUserPassword, ,""

HKR, ,CalibrationInterval, ,300

HKR, ,EnergyDetection, ,0

HKR, ,DriverDescription, ,"U.S. Robotics 802.11g Wireless Turbo
Adapter"

HKR, ,TriggerRxMem, ,1

HKR, ,TriggerTx, ,5

HKR, ,TriggerFcs, ,0

HKR, ,ScrPad5, ,0

HKR, ,dot11ABAMode, ,2

HKR, ,RtsCtsProtection, ,0

HKR, ,ClockRate, ,80

HKR, ,ShortSlotTime, ,0

; TcpWindowSize - TCP Window size
HKLM,System\CurrentControlSet\Services\Tcpip\Parameters, TcpWindowSize,
0x10001, 25200


HKR,NDI\params\dot11DesiredBSSType,ParamDesc,,"Desired BSS Type"
HKR,NDI\params\dot11DesiredBSSType,type,,"enum"
HKR,NDI\params\dot11DesiredBSSType,default,,"1"
HKR,NDI\params\dot11DesiredBSSType\enum,"0",,"Ad-hoc"
HKR,NDI\params\dot11DesiredBSSType\enum,"1",,"Infrastructure"

HKR, Ndi\Params\dot11DesiredSSID, ParamDesc, ,"Desired SSID"
HKR, Ndi\Params\dot11DesiredSSID, Type, ,"edit"
HKR, Ndi\Params\dot11DesiredSSID, LimitText, ,"32"
HKR, Ndi\Params\dot11DesiredSSID, Default,,"ANY"
HKR, Ndi\Params\dot11DesiredSSID, UpperCase,,"0"

HKR,NDI\params\dot11PowerMode,ParamDesc,,"Power Mode"
HKR,NDI\params\dot11PowerMode,type,,"enum"
HKR,NDI\params\dot11PowerMode,default,,"0"
HKR,NDI\params\dot11PowerMode\enum,"0",,"Continuous Access Mode"
HKR,NDI\params\dot11PowerMode\enum,"1",,"Maximum Power Save"
HKR,NDI\params\dot11PowerMode\enum,"2",,"Fast Power Save"

; Desired Tx Rate 
HKR,,dot11DesiredTxRate,,"0"
;HKR,NDI\params\dot11DesiredTxRate,ParamDesc,, "Desired Tx Rate"
;HKR,NDI\params\dot11DesiredTxRate,type,,"enum"
;HKR,NDI\params\dot11DesiredTxRate,default,,"0"
;HKR,NDI\params\dot11DesiredTxRate\enum,"0",,"Auto"
;HKR,NDI\params\dot11DesiredTxRate\enum,"1",,"1 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"2",,"2 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"3",,"5.5 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"4",,"6 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"5",,"9 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"6",,"11 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"7",,"12 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"8",,"18 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"9",,"22 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"10",,"24 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"11",,"36 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"12",,"48 Mbps"
;HKR,NDI\params\dot11DesiredTxRate\enum,"13",,"54 Mbps"

; Desired supported Rate Set 
HKR,NDI\params\dot11SupportedRateMask,ParamDesc,, "Desired Supported
Rate Set"
HKR,NDI\params\dot11SupportedRateMask,type,,"enum"
HKR,NDI\params\dot11SupportedRateMask,default,,"8"
HKR,NDI\params\dot11SupportedRateMask\enum,"0",,"1,2 Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"1",,"1,2,5.5,11 Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"2",,"1,2,5.5,11,22 Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"3",,"Up to 18Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"4",,"Up to 24Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"5",,"Up to 36Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"6",,"Up to 48Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"7",,"Up to 54Mbps"
HKR,NDI\params\dot11SupportedRateMask\enum,"8",,"All"

; Desired Basic Rate Set 
HKR,NDI\params\dot11BasicRateMask,ParamDesc,, "Desired Basic Rate Set"
HKR,NDI\params\dot11BasicRateMask,type,,"enum"
HKR,NDI\params\dot11BasicRateMask,default,,"1"
HKR,NDI\params\dot11BasicRateMask\enum,"0",,"1,2 Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"1",,"1,2,5.5,11 Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"2",,"Up to 12Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"3",,"Up to 18Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"4",,"Up to 24Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"5",,"Up to 36Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"6",,"Up to 48Mbps"
HKR,NDI\params\dot11BasicRateMask\enum,"7",,"Up to 54Mbps"

; Fragmentation Threshold 
HKR, Ndi\Params\dot11FragmentationThreshold, ParamDesc, ,"Fragmentation
Threshold"
HKR, Ndi\Params\dot11FragmentationThreshold, Type, , "int"
HKR, Ndi\Params\dot11FragmentationThreshold, Default, , "4096"
HKR, Ndi\Params\dot11FragmentationThreshold, Min, , "256"
HKR, Ndi\Params\dot11FragmentationThreshold, Max, , "4096"
HKR, Ndi\Params\dot11FragmentationThreshold, Step, , "1"
HKR, Ndi\Params\dot11FragmentationThreshold, Base, , "10"

; RTS Threshold 
HKR, Ndi\Params\dot11RTSThreshold, ParamDesc, ,"RTS Threshold"
HKR, Ndi\Params\dot11RTSThreshold, Type, , "int"
HKR, Ndi\Params\dot11RTSThreshold, Default, , "4096"
HKR, Ndi\Params\dot11RTSThreshold, Min, , "0"
HKR, Ndi\Params\dot11RTSThreshold, Max, , "6000"
HKR, Ndi\Params\dot11RTSThreshold, Step, , "1"
HKR, Ndi\Params\dot11RTSThreshold, Base, , "10"

HKR,NDI\params\dot11WEPStatus,ParamDesc,,"WEP Option"
HKR,NDI\params\dot11WEPStatus,type,,"enum"
HKR,NDI\params\dot11WEPStatus,default,,"1"
HKR,NDI\params\dot11WEPStatus\enum,"0",,"WEP Enabled"
HKR,NDI\params\dot11WEPStatus\enum,"1",,"WEP Disabled"

HKR,NDI\params\dot11AuthenticationMode,ParamDesc,,"Authentication Mode"
HKR,NDI\params\dot11AuthenticationMode,type,,"enum"
HKR,NDI\params\dot11AuthenticationMode,default,,"0"
HKR,NDI\params\dot11AuthenticationMode\enum,"0",,"Open Authentication"
HKR,NDI\params\dot11AuthenticationMode\enum,"1",,"Shared
Authentication"
HKR,NDI\params\dot11AuthenticationMode\enum,"2",,"Auto Switch"

HKR,NDI\params\dot11ShortPreambleInvoked,ParamDesc,,"Short Preamble"
HKR,NDI\params\dot11ShortPreambleInvoked,type,,"enum"
HKR,NDI\params\dot11ShortPreambleInvoked,default,,"0"
HKR,NDI\params\dot11ShortPreambleInvoked\enum,"0",,"Off"
HKR,NDI\params\dot11ShortPreambleInvoked\enum,"1",,"On"

;HKR,NDI\params\ELPSupport,ParamDesc,,"ELP Support"
;HKR,NDI\params\ELPSupport,type,,"enum"
;HKR,NDI\params\ELPSupport,default,,"0"
;HKR,NDI\params\ELPSupport\enum,"1",,"Enabled"
;HKR,NDI\params\ELPSupport\enum,"0",,"Disabled"

;HKR, Ndi\Params\LeapUserName, ParamDesc, ,"LeapUserName"
;HKR, Ndi\Params\LeapUserName, Type, ,"edit"
;HKR, Ndi\Params\LeapUserName, LimitText, ,"32"
;HKR, Ndi\Params\LeapUserName, Default,,"tiwlan"
;HKR, Ndi\Params\LeapUserName, UpperCase,,"0"

;HKR,NDI\params\LeapEnabled,ParamDesc,,"LeapEnabled"
;HKR,NDI\params\LeapEnabled,type,,"enum"
;HKR,NDI\params\LeapEnabled,default,,"0"
;HKR,NDI\params\LeapEnabled\enum,"1",,"Enabled"
;HKR,NDI\params\LeapEnabled\enum,"0",,"Disabled"

HKR, ,Mode4x, ,"1"
;HKR,NDI\params\Mode4x,ParamDesc,,"Turbo Mode"
;HKR,NDI\params\Mode4x,type,,"enum"
;HKR,NDI\params\Mode4x,default,,"1"
;HKR,NDI\params\Mode4x\enum,"0",,"Off"
;HKR,NDI\params\Mode4x\enum,"1",,"On"

;HKR,NDI\params\Mode4xMixed,ParamDesc,,"Mode4xMixed"
;HKR,NDI\params\Mode4xMixed,type,,"enum"
;HKR,NDI\params\Mode4xMixed,default,,"0"
;HKR,NDI\params\Mode4xMixed\enum,"0",,"Off"
;HKR,NDI\params\Mode4xMixed\enum,"1",,"On"

HKR,NDI\params\IBSSProtectionType,ParamDesc,,"AddHoc Protection Type"
HKR,NDI\params\IBSSProtectionType,type,,"enum"
HKR,NDI\params\IBSSProtectionType,default,,"0"
HKR,NDI\params\IBSSProtectionType\enum,"0",,"None"
HKR,NDI\params\IBSSProtectionType\enum,"1",,"Standard"
HKR,NDI\params\IBSSProtectionType\enum,"2",,"Proprietary"

HKR,NDI\params\g80211DraftNumber,ParamDesc,,"802.11G Draft Number"
HKR,NDI\params\g80211DraftNumber,type,,"enum"
HKR,NDI\params\g80211DraftNumber,default,,"6"
HKR,NDI\params\g80211DraftNumber\enum,"5",,"Draft 5"
HKR,NDI\params\g80211DraftNumber\enum,"6",,"Draft 6"


; Desired channel
HKR, Ndi\Params\dot11DesiredChannel, ParamDesc, ,"Desired Channel"
HKR, Ndi\Params\dot11DesiredChannel, Type, , "int"
HKR, Ndi\Params\dot11DesiredChannel, Default, , "11"
HKR, Ndi\Params\dot11DesiredChannel, Min, , "1"
HKR, Ndi\Params\dot11DesiredChannel, Max, , "11"
HKR, Ndi\Params\dot11DesiredChannel, Step, , "1"
HKR, Ndi\Params\dot11DesiredChannel, Base, , "10"

[DestinationDirs]
DefaultDestDir  = 12 ; System Directory
USR11G.8400.CopyFiles = 11
USR11G.8400.BinFiles.NT = 10,system

[SourceDisksNames]
1 = %DiskName%,,

[SourceDisksFiles]
USR11G.sys  = 1
tiacx111.bin = 1

[Strings]
TI="U.S. Robotics"
USR11G.DeviceDesc = "U.S. Robotics 802.11g Wireless Turbo Adapter"
USR11G.Service.DispName  = "U.S. Robotics 802.11g Wireless Turbo
Adapter"
WLANAdapterHelpText= "A WLAN Adapter provides high speed connection to
the Internet through 802.11g technology"
DiskName="USR WLAN Installation Disk"

+ cd /var/lib/driverloader && find . -name '*.sys' -type f -print -exec
strings -e l {} \;
./usr11g.sys
BFD: ./usr11g.sys (.text): Section flag IMAGE_SCN_MEM_NOT_PAGED
(0x8000000) ignored
\Device\TIWLN11G
\DosDevices\TIWLN11G
dot11WEPDefaultKey1
dot11WEPDefaultKey2
dot11WEPDefaultKey3
dot11WEPDefaultKey4
tiacx11.bin
DriverSysTimeI2
DriverSysTimeI1
DriverSysTime
 	0	 
VendorId
PermAddress
SlotNumber
NumACXRxDescriptors
NumACXTxDescriptors
dot11ListenInterval
dot11DesiredBSSType
dot11DesiredSSID
dot11DesiredBSSID
dot11PowerMode
dot11DesiredTxRate
dot11DesiredChannel
RateFallBackRetryLimit
RateFallBackThreshold
RateStepUpThreshold
FBShortInterval
FBLongInterval
dot11MgmtFrameRate
dot11SupportedRateMask
dot11BasicRateMask
dot11FragmentationThreshold
dot11RTSThreshold
dot11ShortRetries
dot11LongRetries
dot11MaxTransmitMSDULifetime
dot11MaxReceiveLifetime
dot11MaxSiteLifetime
dot11MaxScanTimeout
dot11MaxAuthRetry
dot11MaxAssocRetry
dot11MaxReassocRetry
dot11MaxScanTime
dot11MinScanTime
RadioStartup
dot11WEPStatus
dot11ExcludeUnencrypted
dot11WEPKeymappingLength
dot11WEPDefaultKeyID
dot11AuthenticationResponseTimeout
dot11AssociationResponseTimeout
dot11BeaconPeriod
dot11PBCCInvoked
dot11ShortPreambleInvoked
dot11TxAntenna
dot11RxAntenna
ELPSupport
NumHostRxDescriptors
NumHostTxDescriptors
PctACXRxMemoryPool
ACXMemoryBlockSize
dot11AuthenticationMode
FragCacheSize
DriverDescription
LeapEnabled
LeapUserName
LeapUserPassword
Mode4x
Mode4xMixed
IBSSProtectionType
dot11ABAMode
ClockRate
g80211DraftNumber
EnergyDetection
RtsCtsProtection
ShortSlotTime
GOnlyMode
FactorRSSI
CalibrationInterval
TriggerRxMem
TriggerTx
TriggerFcs
ScrPad5
VS_VERSION_INFO
StringFileInfo
040904B0
CompanyName
U.S. Robotics
FileDescription
U.S. Robotics 802.11g Wireless Turbo Driver
FileVersion
4.0.40.4 built by: WinDDK
InternalName
LegalCopyright
Copyright (C) All rights reserved. 
OriginalFilename
ProductName
U.S. Robotics 802.11g Wireless Turbo Adapter
ProductVersion
4.0.40.4
VarFileInfo
Translation

+ ls -lR /lib/modules/2.4.22-ac4/misc
/lib/modules/2.4.22-ac4/misc:
total 160
-rw-r--r--    1 root     root       155790 Jan  9 12:22 driverloader.o



-- 
  Cristiano De Michele,
  Department of Physics,
  University "Federico II" of Naples


More information about the driverloader mailing list